International Harvester 9000 2001
Model 9000 made in 2001 by International Harvester got 1 investigation there are 3 recalls as well as 4 service bulletins. Technical service bulletines regarding electrical system, (pws) and steering. The car had one investigation (suspension). There were some recalls concerningservice brakes, air, suspension.
Model 2001
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SERVICE BRAKES, AIR | ||||||||||||||||
| 03V137000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 02/12/1998 to 01/28/2002 | V (Vehicle) | 2818 | 04/18/2003 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 04/03/2003 | 04/22/2003 | |||||||
| Defect Summary | On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail. | |||||||||||||||
| Consequence Summary | If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began on april 18, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | International recall no.02506. customers can also contact the national highway traffic safety administration | |||||||||||||||
| SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE | ||||||||||||||||
| 02V135002 | INTERNATIONAL TRUCK AND ENGINE | from 09/02/1997 to 03/04/2002 | V (Vehicle) | 108560 | 11/11/2002 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 05/20/2002 | 09/06/2002 | |||||||
| Defect Summary | On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail. | |||||||||||||||
| Consequence Summary | If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began september 11, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
| SUSPENSION - FRONT - HUB | ||||||||||||||||
| 03V193000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 01/09/1998 to 10/09/2001 | V (Vehicle) | 2163 | 11/12/2003 | ODI | INTERNATIONAL TRUCK & ENGINE CORPORATION | 05/21/2003 | 06/03/2003 | |||||||
| Defect Summary | On certain heavy and medium duty trucks and buses equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely. | |||||||||||||||
| Consequence Summary | Seizure of the bearings can cause wheel separation or wheel end fire. | |||||||||||||||
| Corrective Summary | Dealers will replace all front axle hubs. owner notification began on november 12, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | International recall no. 03510.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM | |||||
| IK-0800127 | 02/13/2008 | 10032931 | International: gauges dropping out on 5000 and 9000 series trucks. disconnect the module for the boost gauge, all gauges should start working now if this is the issue. not working or don't have boost gauge then this is not your issue. n | 06/14/2010 | |
| (PWS) | |||||
| IK-0400088 | 06/04/2012 | 10044291 | International: procedure information to resolve issue of overheating and smoking of low mileage, single wheel end brake. *pe | 06/06/2012 | |
| IK-0400107 | 06/04/2012 | 10044292 | International: after lining condition and wear have been verified on the brakes because of the chatter or squealing on the trucks. no model or model years are listed. *pe | 06/06/2012 | |
| STEERING - WHEEL AND HANDLE BAR | |||||
| IK-0200006 | 03/04/2009 | 10030108 | International truck: steering wheel shack left to right at road speed. confirm the left side has the compostie bearing and the right side has athe roller bearing. no model years listed. *pe | 08/03/2009 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| SUSPENSION - FRONT - HUB | ||||||
| PE02092 | INTERNATIONAL TRUCK & ENGINE CORPORATION | 12/03/2002 | 05/23/2003 | INTEGRAL HUB AND BEARING ASSEMBLY | 03V193000 | |
| The companies involved in this matter are:skf (hub mfr), arvinmeritor (front axle mfr), and international,( manufacturers of medium duty trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvin meritor.as a result, arvinmeritor notified international of axles supplies with possible defective front hub assemblies.as a result of that notification, 2041 trucks are being recalled by international for defective front axle wheel bearings which may fail in such a way that a wheel separation or wheel bearing fire occurs.see attached summary report for additional details. | ||||||