International Harvester Cargostar Series 1975

Model Cargostar Series made in 1975 by International Harvester got 8 recalls. There were some recalls concerningpower train, service brakes, air and steering.

Model 1975

Recalls

CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
POWER TRAIN - AUTOMATIC TRANSMISSION
75V089000NAVISTAR INTL CORP. V (Vehicle)300006/06/1975MFRINTERNATIONAL TRUCK & ENGINE CORPORATION05/15/197510/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesInternational harvester campaign no 75506.fleetstar,fleetstar,paystar,cargostar,f8500m equipped with detroit allisonmt-650 transmission.trucks.possibility that vehicles equipped with mt-650automatic transmission may contain nylon particle contaminant within thegovernor assembly.a nylon particle could block an orifice in the governorvalve and result in unintentional transmission down shift with the possibilityof transmission disintergration.(correct by inspecting and replacing governorassembly where necessary).
SERVICE BRAKES, AIR - ANTILOCK - CONTROL UNIT/MODULE
75V117000NAVISTAR INTL CORP. V (Vehicle)850012/09/1975MFRINTERNATIONAL TRUCK & ENGINE CORPORATION06/23/197510/12/1979571121
Defect Summary
Consequence Summary
Corrective Summary
NotesInternational campaign no 77509.trucks loadstar, fleetstar, cargostar,tramstar, paystar, conco, 1971 thru 1975 to date.possibility that variousmalfunctions of the anti-lock computers module system can range fromillumination of the anti-lock failure warning light with no apparent effect onthe vehicle braking system to a momentary loss of brake effectiveness on one ormore axles.(correct by inspecting and replacing computer module).
SERVICE BRAKES, AIR - DRUM
75V047000NAVISTAR INTL CORP. V (Vehicle)40004/15/1975MFRINTERNATIONAL TRUCK & ENGINE CORPORATION03/24/197510/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesInternational harvester campaign no 75503.transtar co,transtar conv.,paystar,loadstar,cargostar,fleetstar.possibility that the cam brake anchorpins were improperly processed (hardened).if cam brake are assembled usingimproperly processed anchor pins, a fracture of pin could occur during brakeapplication, causing loss of proper tension of the brake shoes and reduction inthe effectiveness of the brakes.(correct by inspecting and replacing anchorpins with properly hardened anchor pins).
79V211000INTERNATIONAL HARVESTERfrom 03/01/1975 to 04/01/1979V (Vehicle)2500011/30/1979ODIINTERNATIONAL TRUCK & ENGINE CORPORATION09/18/197912/12/1979
Defect SummaryAs a result of severe shock and vibrations, the brake spiders on the involved vehicles may develop cracks near the camshaft mounting boss. the crack propagates across the spider until the camshaft boss is completely severed from the remainder of the spider. when the camshaft boss has completely severed, the s-cam, s-cam bracket, air chamber and slack adjuster can fall away from the brake spider resulting in a no brake condition on the wheel.
Consequence Summary
Corrective SummaryThe dealer will replace the front brake spiders on all affected vehicles used in snow plow dump and refuse hauling applications. this will be done at no charge.
NotesVehicle description: medium and heavy trucks equipped with eaton 16-1/2 by 5inch s-cam.system: service brakes: brake spiders.consequences of defect: partial loss of front braking capability and imbalancescan affect vehicle stability during sudden stops. this can contribute to avehicle accident.
SERVICE BRAKES, AIR - SUPPLY - HOSES, LINES/PIPING, AND FITTINGS
75V191000NAVISTAR INTL CORP. V (Vehicle)850012/19/1975MFRINTERNATIONAL TRUCK & ENGINE CORPORATION10/31/197510/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesIhc campaign no 75513.loadstar, cargostar trucks.possibility that duringextreme upward movement of the rear axle, a brake hose fitting connected to avalve mounted on a bracket located on the top front side of the rear axlehousing can come into contact with structure or components mounted on thevehicle frame.this contact could result in a fracture of the hose end fittingor valve body.fractures can result in a sudden loss of air pressure whichholds the spring brakes (parking) in release position and sudden application ofthe spring brakes will occur.(correct by inspecting and revising to hoserouting or valve mounting).
STEERING - LINKAGES
85V046000NAVISTAR INTL CORP.from 07/01/1973 to 03/01/1985V (Vehicle)15500MFRINTERNATIONAL TRUCK & ENGINE CORPORATION04/26/198505/01/1985
Defect SummaryThe steering pitman arm could develop cracks and eventually fracture due to high bending loads. consequence of defect: such a fracture could cause a loss of steering control and result in a vehicle crash without prior warning.
Consequence Summary
Corrective SummaryReplace pitman arm with a redesigned strengthened arm.
NotesVehicle description: trucks and tractors equipped with 10,800 pound and 12,000pound capacity front axles and sheppard power steering. system: steering pitman arm.
84V109000INTERNATIONAL HARVESTERfrom 05/01/1975 to 08/01/1984V (Vehicle)1320010/12/1984ODIINTERNATIONAL TRUCK & ENGINE CORPORATION09/19/198410/09/1984
Defect SummaryThe steering arm may crack or break in either low speed or stand still maneuvers. cracking may occur as a result of repeated full lock turns.
Consequence Summary
Corrective SummaryThe existing steering arm will be replaced with a redesigned and strengthened arm.
NotesVehicle description:trucks and truck tractors equipped with 10,800 or 12,000 lbcapacity front axles.system: steering linkages; steering arm.consequences of defect: complete fracture results in the loss of steeringcontrol and the possibility of an accident.
WHEELS - MULTI PIECE
77V180000INTERNATIONAL HARVESTER V (Vehicle)2198011/11/1977ODIINTERNATIONAL TRUCK & ENGINE CORPORATION10/17/197710/12/1979
Defect SummaryThe deficiency exists in the front axle forged aluminum hubs. the deficiency which is in the barrel section between the inner and outer bearing, may result in cracks which could lead to hub failure. when hub failure occurs, the separated hub is retained on the axle spindle by the wheel bearing and adjusting nut.
Consequence Summary
Corrective SummaryThe dealer will replace the forged aluminum hubs with steel hubs, at no charge.
NotesVehicle description: medium and heavy trucks.system: suspension; wheels, front axle hubs.consequences of defect: continued vehicle operation could allow the separatedhub with the wheel and tire to become disengaged from the vehicle. thiscondition could result in loss of vehicle control and an accident.note: advance failure warning will occur in the form of wheel bearing lubeleaks on the wheel rim or tire. in the event hub failure occurs during vehicleoperation, warnings to the operator will occur in the form of an audible sound,wheel vibration and the steering feel of a severely underinflated tire.

Some parts © 2024 Advameg, Inc.
Based on public records. Inadvertent errors are possible.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the vehicle's manufacturer.