Consumer Complaints


Fail datemilesoccurencesPurchase date
ENGINE AND ENGINE COOLING - COOLING SYSTEM
05/12/1999208/01/1996
 Each time the engine coolant reservoir began leaking at the seam where it is put together, causing the engine to overheat at the dealership the man at the parts dept. said that this happened alot and something should be done. *ak
ENGINE AND ENGINE COOLING - ENGINE
10/29/2000112/04/1986
 With the engine running at idle speed, the idler pulley separated from the engine and almost hit the consumers head, it bounced off the consumers garage wall and impacted the garage concrete floor, the bearings within the idler pulley failed, causing the pulley bolt threads to back out of the housing. *yd
10/29/2000112/04/1986
 The bearings within the idler pulley (number 53002905) failed causing the pulley bolt threads to back out of the housing, the engine was running with the hood up slightly above engine idle speed when idler pulley separated from the engine and became airborn. nlm
10/29/20001
 While the engine was running, bearing within the idler pulley failed, the pulley bolt threads back out of the housing, the idler pulley separated from the engine and torpedoed pass owner's head, pulley could have seriously injured or killed anyone in its path. *cj
07/15/1995
 Line was plugged which blew oil onto the motor and caught fire. tt
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
109/09/1999
 Possibele engine failure, the vehicle lost speed and over heated, catching fire and rsulting in total damage. yh
 Vehicle stalls at stop signs and sometimes when turning corners intermittently, tested eec, replace valve asy, sensor assy-exh gas, replace egr and evp open at all times road test.
05/17/19967
 Oil/antifreeze leak from engine started fire. *dh