Jeep Grand Cherokee 1991
Model Grand Cherokee made in 1991 by Jeep got 6 consumer complains there are 5 investigations as well as 1 service bulletin. Consumer complaints with reference, among others things, to engine and engine cooling, power train and service brakes, hydraulic. Technical service bulletines regarding seats. The car had some investigations: power train, seat belts and service brakes, hydraulic.
Model 1991
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
SEATS | |||||
2300800B | 11/24/2000 | 230800A | 615688 | Subject regarding child seat tether anchors. *tt | 01/28/2001 |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
POWER TRAIN | ||||||
DP02005 | CHRYSLER GROUP LLC | 04/25/2002 | 09/10/2002 | SUDDEN ACCELERATION | ||
Sudden vehicle acceleration is allegedly caused by a defect in the design and assembly of the connector interface between the main wiring harness and the powertrain control module | ||||||
SEAT BELTS | ||||||
PE96008 | CHRYSLER GROUP LLC | 01/25/1996 | 06/28/1996 | SAFETY BLT LATCH OPERATION | ||
There is no summary currently available | ||||||
SERVICE BRAKES, HYDRAULIC | ||||||
EA97001 | CHRYSLER GROUP LLC | 01/13/1997 | 01/09/1998 | BRAKE DISC/HUB SEPARATION | 98V005000 | |
Consumer complaints indicate that corrosion of the brake rotors have caused separation of the brake disc from its hub, resulting in brake failure. | ||||||
PE96053 | CHRYSLER GROUP LLC | 09/05/1996 | 01/13/1997 | BRAKE DISC/HUB SEPARATION | ||
Consumer complaints indicate that corrosion of hte brake rotors have caused separation of the brake disc from its hub, resulting in brake failure. | ||||||
SUSPENSION | ||||||
PE95049 | CHRYSLER GROUP LLC | 08/17/1995 | 01/26/1996 | REAR AXLE SHAFT SEPARATION | ||
This investigation was opened to examine the failure mode and the risk to motor vehicle safety posed by allegations of rear axle separations.the rear axle shaft and housing design is typical of those in which the weight of the vehicle is carried on the axle housing.the left and right axle shafts, supported by roller bearings, are situated inside the axle housing.the inboard splined end of the axle shaft receives power transmitted from the differential assembly, providing torque to the rear wheels.the allegations are that the axle shaft fails, resulting in the separation of a wheel and axle hub assembly or the entire axle shaft and wheel assembly, depending on the location of the axle shaft failure.as identified by chrysler, the subject rear axles are dana 35c and 35cm models, which have been used on the subject vehicles since the 1990 model year.a safety defect trend with respect to the subject axle shafts has not been identified.see hard copy resume for full text of summary. |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM | |||
11/18/1997 | |||
After replacement of catalytic converter ( new item 3omph) and exhaust system turned a bright orange suddenly fire seeped from the undercarriage: flames 3--4 inches from fuel tank. *ak | |||
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL - CATALYTIC CONVERTOR | |||
11/18/1997 | |||
After replacement of catalytic converter ( new item 3omph) and exhaust system turned a bright orange suddenly fire seeped from the undercarriage: flames 3--4 inches from fuel tank. *ak | |||
POWER TRAIN - DRIVELINE - DIFFERENTIAL UNIT | |||
01/25/1995 | |||
Normal operation consumer came upon an object applied the brakes and the vehicle rolled over twice, causing the differential to seperate from the vehicle. please provide more details. | |||
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
10/19/2005 | 1 | 07/17/2005 | |
Dt: the contact stated that while driving the dashboard light for abs came on. while trying to mash the brakes and stop the pedal went to the floor. the vehicle would not stop, and the contact had to pull the emergency brake to come to a stop. after this, the vehicle had zero braking ability. the vehicle was then taken to a repair shop, and they said to go to a chrysler dealership. the contact called chrysler, and he was informed that there was no recall on this vehicle. the contact was planning on having the brakes fixed. the vehicle is a 1991 jeep grand cherokee.*ak | |||
05/02/1994 | |||
Applied pressure on pedal brakes would not stop. no response from anti lock braking system. tt | |||
STRUCTURE - BODY | |||
05/18/1991 | |||
Vehicle's body paint is flaking off. |