Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
98V005000CHRYSLER CORPORATIONfrom 07/01/1992 to 07/31/1993V (Vehicle)29336903/09/1998ODICHRYSLER GROUP LLC01/12/199801/22/1998
Defect SummaryVehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. the front disc brake rotors can experience severe corrosion if operated for an extensive period in the salt belt. if the rotors are not replaced, the corrosion can eventually compromise the structural integrity of the stamped steel center hub section of the rotor.
Consequence SummaryThe reduced strength can allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle.
Corrective SummaryDealers will replace these rotors with rotors that are coated with a corrosion protection.
NotesOwner notification began march 9, 1998.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-992-1997.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
92V181000CHRYSLER CORPORATIONfrom 10/01/1992 to 10/01/1992V (Vehicle)60002/05/1993MFRCHRYSLER GROUP LLC12/14/199212/30/1992
Defect SummaryThe retainer clip which secures the master cylinder input rod to the brake pedal was not installed properly, and could work loose.
Consequence SummaryDisengagement of the retainer clip will allow free playin the attachment and can allow the input rod to separate from the brake pedalcausing complete loss of brake application which could result in an accident.
Corrective SummaryImproperly installed retainer clips will be removed and new retainer clips will be properly installed.
NotesSystem: brakes.vehicle description: grand cherokee and grand wagoneer utility vehicles.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
EA99014CHRYSLER GROUP LLC06/28/199903/28/2000BRAKE ROTER DISC/HUD SEPARATION00V136000
 Daimlerchrysler conducted a safety recall, 98v-005, on january 5, 1998 involving approximately 225,000 1993 grand cherokee, 1990-91 cherokee, wrangler and comanche, and 1989-91 eagle premier and dodge monaco.the front disc brake rotors of these vehicles may experience severe corrosion if operated for an extensive period in the salt belt states.owners in connecticut, illinois, indiana, maine, massachusetts, maryland, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, wisconsin, and the district of columbia will receive replacement rotors that are coated with a different corrosion protection coating, inorganic 531.chrysler began owner notification onmarch 9, 1998.the purpose of the investigation is to determine the scope and the remedy effectiveness of the safety recall, 98v-005.
EA97001CHRYSLER GROUP LLC01/13/199701/09/1998BRAKE DISC/HUB SEPARATION98V005000
 Consumer complaints indicate that corrosion of the brake rotors have caused separation of the brake disc from its hub, resulting in brake failure.
PE96053CHRYSLER GROUP LLC09/05/199601/13/1997BRAKE DISC/HUB SEPARATION
 Consumer complaints indicate that corrosion of hte brake rotors have caused separation of the brake disc from its hub, resulting in brake failure.
EA99014CHRYSLER GROUP LLC06/28/199903/28/2000BRAKE ROTER DISC/HUD SEPARATION99V340000
 Daimlerchrysler conducted a safety recall, 98v-005, on january 5, 1998 involving approximately 225,000 1993 grand cherokee, 1990-91 cherokee, wrangler and comanche, and 1989-91 eagle premier and dodge monaco.the front disc brake rotors of these vehicles may experience severe corrosion if operated for an extensive period in the salt belt states.owners in connecticut, illinois, indiana, maine, massachusetts, maryland, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, wisconsin, and the district of columbia will receive replacement rotors that are coated with a different corrosion protection coating, inorganic 531.chrysler began owner notification onmarch 9, 1998.the purpose of the investigation is to determine the scope and the remedy effectiveness of the safety recall, 98v-005.

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK
10/16/2002
 Consumer stated that while driving at any speed the anti lock brake light will come on and stay on the remainder of the time vehicle is running. dealer notified. mr
04/01/1994
 High humidity or rain cause abs brakes to lockup violently - causing loss of control and skid
SERVICE BRAKES, AIR - DISC - PADS
02/20/19971
 Brake pads failed.
SERVICE BRAKES, AIR - DISC - ROTOR
10/25/2002
 The brake hub that is attach to the drum separted from rotor. the dealership is aware of the problem. ts
03/11/19981
 Front brake rotor were replaced prior to recall notice.
1
 Front brake rotors failed prior to recall notice.
SERVICE BRAKES, ELECTRIC
12/24/1996107/02/1993
 Left front wirin gharness had a short, wires melted, resulting in a fire. *ak
SERVICE BRAKES, HYDRAULIC
06/15/2003129000
 Compressor works but ac evaporateur freezes up. brakes have problems with the rotors. paint peels on passenger door and roof.
09/15/20030
 My main concern is that i have a paint peeling problem on the hood of my car. originally i just thought that it was my car but there are 2 other people in my office building with the same color, year make and model as my car and we all have the paint peeling problem in the same areas.
09/01/1993
 Brakes failed within first month--cause not found. lost all power and control--ignition coil replaced twice.
07/25/1998505/31/1998
 Brakes lock after vehicle has been exposed to rain.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
06/28/2002
 While traveling about 15mph on a side road steering and brakes lock up. dealership is aware of problem.*ak
 When depressing brakes, pedal is soft and descends to floor with inadequate pressure. owner is concerned about performance of the abs braking system. please describe. *ak
08/31/20011
 Circuit for hydraulic unit of anti-lock brake system failed. this was diagnosed by a goodyear service center. please provide any additional information / attachments.*ak
09/01/1997
 Brakes locked up on my wife in heavy traffic (2 police officers witnessed the lock-up since she was blocking traffic). the officers called a wrecker, but she turned the key on and off a few times and the brakes released. we took the vehicle to the local dealer, but they were unable to diagnose the problem. i searched other complaints on nhtsa's website and found several complaints of brake lock-up on this model. i also have investigated an ase website that indicates several people having the same problem. i worry about my wife and 10 month old daughter's safety if there is a problem with the design that makes it prone to lock-up the brakes. i would just ask that it be looked into before someone is hurt.*ak
03/01/2000
 Abs light stays on, brake pedal kicks back when applying brake, there is a loud noise, and steering makes noise too. numerous times to dealer , cannot remedy. also, vehicle stalls at low speed when in reverse. *ak
02/11/20010
 Consumer was applying brakes in traffic, and brakes were not working. consumer had to brake again with both feet down on brakes to stop. consumer hit another car because brakes did not grab in time. *ak
01/19/2000302/23/1999
 There's a shutter when braking at highway speeds.it starts to get harder to steer, and in emergency it could be worse. *ak
01/01/1994
 The parts didn't fail. i notices dents in the slide groves for the front brake pads. was concerned the pads could stick in a heavy breaking situation. it is apparent that the dents could stop the movement of the pads when breaking. this was noticed when the first brake change was done, and jeep said it wasn't a problem. this could be because of the cost of changing the knucke joint. if you need any more information feel free to contact me. thank you. *ak
02/04/2000101/01/1994
 While driving at 55mph the front left wheel locked up, causing loss of control. the driver brought the vehicle under control and was able to guide it to the shoulder. the left fender was torn up and wheel/tire damaged. the incident could have easily caused a major accident to both oncoming and same-direction traffic. *ak
08/28/1999
 When brakes are applied, vehicle would jerk to the right. sounded like tin cans falling. would make a lot of noise. vehicle towed to dealer. consumer was informed that brake rotors were warped & needed to be changed. *ak
12/16/19931205/01/1993
 The entire car shakes violently with loud. horrible vibration sounds when going down my driveway which is on a moderate grade. it is most pronounced the first time i drive the car on a day following a rain fall when my car has been parked in my garage overnight. while attempting to brake,in my driveway, the car sharply swerves to the left. brakes have failed entirely while in 4-wheel drive in snow 2-3 inches deep @ 5-10 mph. brakes have locked repeatedly after going through a car wash. i have been told repeatedly by the dealer that this is normal for abs and they have given me tips re: putting the car in low gear and using my parking brake when car starts to shake and skid while going down my driveway. a number of times, while raining, when i have put my foot on the brake to stop, on level ground, at 10-15mph, the brakes have grabbed violently. once,in a shopping center parking lot this caused my son to hit his head on the dashboard while he was fastening his seat belt. i was told by the dealer that i needed to learn to drive differently with abs, that it was a user problem, not a problem with the vehicle. during dry months in california i have no problems with the brakes. i dread the rainy seasons and have even considered selling my house because the jeep service manager said that i wouldn't be having any of these problems if i didn't have a steep driveway. my kids have been with me a few times when the horrible noise, skidding and shaking have occurred and they were scared to death. my son attempted to jump out of the car once, in the driveway, because he thought we were going to crash. i have saved all of my service records from the dealer but a couple of times they did not enter my brake complaints into the computer, just the normal service i was having done at the time. i have not taken the car in for the brake problem in the last couple of years because the dealer has convinced me that the 1993 gjc has no history of an abs problem, that i am the problem.
12/13/1996105/01/1993
 Asb system failed during abrupt stop resulting in minor collision.
01/14/1999
 When applying hard pressure the abs does not engage. dealer contacted and cannot remedy the problem. warranty has expired. problem still exists. provide further information. *ak
12/28/1998506/01/1993
 Anti-lock brake system on five different times (since 1993) failed to work properly. we noticed the problem since we owned the car. we took it to the dealer while it was under warranty but they couldn't find anything wrong.this problem occurs very rarely but it could cause an accident or serious injury. this past december (12/28/98), on a rainy day, i was driving at 30 mile per hour and as i was approaching a stop sign at an intersection i started to brake, i heard the noise of the abs system. when i reached the sign i had my foot all the way down and the car failed to stop. i proceeded against my will and finally the car stopped past the intersection. fortunately no other car was at the intersection or no people were crossing because i could have caused serious injuries to myself or somebody else. we called the service dept. at the dealer asking if there had been a recall on our brake system or if other owners of '93 jeep grand cherokee complained about their abs brake system but they said no. we didn't take it back to the dealer bacause they failed to find anything wrong the previous times.as a result of that scary event we disabled the abs brake system. i also owned a '95 dodge ram pick-up truck with abs brakes so i'm familiar with this kind of brakes and their operation. the brakes on the grand cherokee behaved erracticly since the beginning. that never happened with the dodge ram. if other jeeps from 1993 have the same problem chrysler should recall the abs brake system and replace them at their expenses and people should be warned of the danger.
09/15/1998
 Consumer expriencing ongoing problem with erratic operation. whenever vehicle comes to a stop, it appears to stall. also, whenever brakes are applied it would appear to accelerate at an high rmp, and vehicle would lose speed while driving . vehicle been inspected/repired by dealer, and condition still occurring. *ak
06/28/199807/01/1996
 I have been having problems ever since i replaced my brakes pads at speed jeep eagle dealer # 718-377-5110. the abs light would come on and when i press the brakes there's no pressure the brake pedal does not spring backup up and the abs lights stays on. the dearler should have known about this defect with the abs system. the dearler has not bee cooperative with me, and would not refund me the money i have spent trying to fix this abs problem. they just want me to spend more money on trying to get it fix. i have aready spend about $1,200. on this brake problems. this summer i was not able to drive my jeep. becuase i can not stop properly , and i'm scare i might cause an acident. a friend told me about the the abs problem with chrsyler, and suggested i checked the web.. thank you in advance darly romain
06/20/19983
 Consumer complaint that brake rotors have been replaced three times within the 60,000 mile of wear. consumer believed this condition is not considered to be normal. consumer contacted manufacturer manufacturer informed consumer that this codition is normal for the jeep products. *ak
06/01/1998
 When traveling 40 mph and upon depressing the brake pedal to avoid hitting a pothole, the pedal traveled to the floorboard, causing extended stopping distance, resulting in the consumer going through an intersection. consumer has contacted the dealer who indicated that no parts were available. *ak
04/14/19981
 Started vehicle, put it in reverse and the vehicle accelerated at high speed, backed over a bush and a tree 25-30 ft. tall. consumer continued to press brakes. the wheels of the right side on street, the left side on the grass, approximately 4-6 inches above the street. at high speed for 100 ft, smashing a wooden fence then another 30 ft. knocked down an evergreen tree, snapping off at roots, another 150 ft, smashing into vehicle at approx. 80 mph, the air bag did not deploy at any time. *ak
07/07/1995102/01/1993
 Brakes lock up on occasion.
10/12/199608/24/1997
 When driving applied the brakes and the brakes will lock up. this incident only happens when it is wet outside and vehicle has been parked for several hours in the garage or outside. the truck acts like it does not want to stop. *ak
06/25/1997201/29/1993
 Driving at 65 mph brakes stiffened and front end began to shake. pulled off of highway and smoke billowed from left front tire area. defective calipers were blamed for brakes locking up. calipers changed, rotors turned, and pads replaced. one month later same symptoms returned.
08/15/1993108/17/1993
 Brake problems.
1
 Anti-lock brakes do not stop the vehicle sufficiently, several near misses due to brake problem.
09/01/1995109/01/1995
 Anti lock brakes failed.
111/01/1993
 Brakes pulse.
10/01/1995107/01/1993
 Brakes failed.
07/20/19971
 Anti lock brakes failed.
08/09/1997111/20/1992
 Brakes failed,bilaterally, after vehicle was stopped at a traffic light.
05/12/1997
 Vehicle's brakes lock up under wet conditions and the vehicle will not move forward. sometimes have to put in reverse and then back in the drive postion in order for them to unlock. *ak
11/13/199603/01/1993
 Brakes pulsate when depressed.
03/01/1996108/01/1993
 Anti lock brakes failed.
11/01/1993
 Brakes pulsate.
 During wet raod conditions abs braking system locks up, causing very difficult braking. *ak
11/12/1996107/01/1994
 Antilock brake failure.
08/01/19962508/01/1996
 Hydraulic pump of abs brakes is activating without driver touching brake pedal. jeep has severe brake lockup of all four wheels. *ak
09/20/1996
 Both front rotors on the brakes split at the same time so there were no front brakes at all. the system has abs. *ak
10/04/19961
 Failure on the abs brakes, consumer applied force to the brakes and the vehicle would not stop, causing the consumer to have an accident. *ak *jb
09/15/1996103/17/1992
 Vehicle surged forward, resulting in loss of control, brakes failed to stop vehicle from surging, front end misalignment ans replaced broken motor mount. *ak
09/10/1996
 Abs, brake failure, while driving applied brakes had complete brakes failure, rotor broke, causing knuckle to break and a loss of steering. *ak
02/21/19961
 Antilock brakes locked up. *sd
03/22/1996
 Abs brakes; failure on the abs brakes when driving the vehicle the brakes locked up causing the consumer to have a near accident. *ak
 Abs brakes; road conditions, on snow or ice, brakes will perform erratically or when released brakes fail, vehicle goes through intersection. *ak
02/08/1995
 Erratic operation of the anti lock brake warning light. explain in more detail. tt
06/04/1993
 When in 4 wheel drive, brake system locks up. tt
12/04/1995
 When going down a bumpy hill or on a bumpy road the truck will not stop. the truck has anti-lock brakes. please describe. tt
 Sometime when put into reverse jeep doesn't move and the abs anti-lock have been service numerous time . tt
06/17/19957
 Anti-lock brake failure. *ak
08/08/1995
 Abs system failure, when stopping at slow speed vehicle will not stop. tt
01/05/19953
 When snowing on ice road abs anti-lock brake failed. tt
SERVICE BRAKES, HYDRAULIC - ANTILOCK - CONTROL UNIT/MODULE
06/27/19941
 Anti-lock brake sensor module failed, causing abs brakes to fail on wet roads, resulting in loss of control/accident. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
1
 Front brakes are worn out. yh
10/01/1992
 Alternator/braking system/window wiring, motor mounts failed. had to be replaced. these failures could result in a crash. please provide further information.*ak
10/15/1998
 When driving at any speed and applying the brakes there is a very loud noise coming from the brakes. consumer took the vehicle to the dealer and they can't determine the problem. *ak
108/08/1997
 Hesitation/vibration upon braking.
02/01/1997310/29/1993
 Brakes failed.
01/12/1997
 Vehicle has all types of problems, one of the major problems concerned the brakes lock up and the vehicle caught on fire. the dealer fixed the brakes without driver's permission. *ak
10/01/1996311/01/1994
 Poor brake performance
07/26/1995
 During vehicle operation when slowing down, and brakes are applied, the vehicle tends to stall.*ak
09/12/19952
 Brakes failed to stop vehicle twice, once leading to accident.
02/01/19942
 When brakes are applied, it is a delayed reaction, extended stopping distance and back pressure on pedal. tt
12/31/19941
 Brake pedal goes to the floor, cannot find problem. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
03/01/2002
 Vehicle would shake at 45 mph when applying brakes. consumer took off right front tire and noticed one of the bolts was missing. consumer felt that something has stretched and was causing bolts to come out. cause was unknown.*ak
02/26/2002204/01/1997
 No summary listed for above vehicle. *ak
07/01/199901/01/1993
 Corrosion of front rotors has caused deep pits. these pits have caused increased stopping distance. there is a current chrysler recall #747 that deals with the pitting, but our vehicle does not meet the exact guidelines. the guidelines are for a recall on all vehicles sold or currently registered in certain states that apply heavy road salt. our vehicle was bought in ia and is now registered in mn. these states are not on the heavy road salt use list. however, we contend that the recall applies to us because this vehicle was registered for over 3 years in il and oh, where the recall does apply. chrysler is declining assistance. we will pursue this issue until chrysler corrects the problem.
02/18/1995
 When brakes are applied there is a very strong vibration in the front wheels, brakes are sometimes engaging when they are pressed all the way to the floor. the dealership can not duplicate or correct the vibration.
06/01/19971
 Disc braking system failed.
05/20/1995
 Hot spots on front disc brakes, causing them to be reserviced. this is the second occurrence. *ak
04/20/19950
 Front brakes overhauled.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
03/26/19961
 Front brake rotors & front brake calipers failed, causing the front brakes to vibrate & alignment problems. *yc
01/27/19981
 Brake pads, caliper and hose failed.
09/01/1986208/01/1992
 Brake calipers failed on vehicle, caused from rust and being broken.
112/01/1992
 Brake calipers failed.
05/18/1995105/20/1993
 Calipers failed.
07/02/1996108/01/1993
 Brake pin failed, causing accident.
12/07/19941
 Brake calipers froze up, causing premature wear on rotors/brake failure. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
06/09/1998108/30/1993
 Rotors grooved and brake pads worn causing vibration during braking. mjs
01/01/1994
 The parts didn't fail. i notices dents in the slide groves for the front brake pads. was concerned the pads could stick in a heavy breaking situation. it is apparent that the dents could stop the movement of the pads when breaking. this was noticed when the first brake change was done, and jeep said it wasn't a problem. this could be because of the cost of changing the knucke joint. if you need any more information feel free to contact me. thank you. *ak
01/27/19981
 Brake pads, caliper and hose failed.
 Brakes fade, also brake pad failure.
03/14/19952
 Brake pads needed replacement.
10/01/1994107/01/1992
 Brake pads failed.
08/14/1995112/01/1992
 Brake shoes/pads failed.
12/01/19961
 Brake pads failed.
09/01/1995109/01/1995
 Brake pads worn/failed.
05/18/1995105/20/1993
 Brake pads failed.
205/01/1992
 Brake pads warped.
10/01/19961
 Brake pads/shoes failed.
06/26/1996108/19/1994
 Brake pads rusted.
07/01/1997101/31/1993
 Brake shoes cracked.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
03/28/20053
 While applying both feet on the brake pedal in order for the vehicle to stop the vehicle failed to stop on its own. driver was able to maintain control of the vehicle, and pulled over to the shoulder. driver had the vehicle towed to the dealer, and mechanic determined that the left and right rear rotors needed to be replaced. *ak
1322192
 When the brakes were applied, the vehicle vibrated excessively, the dealer replaced the rotors twice. *jb *ts. there was a recall on the vehicle regarding the rotors
11/25/2002529582
 When the brake was applied, there was a loud noise and consumer lost control of the vehicle, it was discovered the rotor had broke from the hub.*ts consumer discovered there was a recall regarding the front brake rotors and had then replaced for a second time.*jb
02/26/2002106/01/1997
 1)ignition: in cold weather difficult to start. ignition coil failed , 2)motor mounts cracked causing engine to rotate on axis, 3) speed sensors in transmission failed, causing lack of shifting to lower gear, 4) windshield wiper control unit under dash burned out, causing smoke to fill compartment, 5) torque converter failedcoming apart ,6) brake rotors replaced as per recall, but within 2000-2500 miles replaced rotors defective (bent/warped)/and too thin to resurface
01/22/2002104/01/2001
 While driving, consumer could step on the brake pedal and could feel pedal pulsating, front rotors had to be replaced due to sticking, also seal had to be fixed. *ak consumer states the tie rod ends failed and was replaced. *yh
09/16/2001106/01/1993
 While driving 10 mph left front hub separated from rotor, causing extended stopping distance, and vehicle pulled to the right. chrysler issued a recall 98v-005 initially covering certain models from 1990-1993. recall was later extended to cover 1994-1995 jeeps. only 16 states were covered including md, nj an pa, all of which border de which was not included. *ak
11/21/20001
 Dealer refused to do recall 92v-181 on vehicle, instead of repairing brake pedal and linkages, dealer did the brake rotor recall 98v-005, however rotors were replaced, but dealer left bad brake pads on causing the new rotor to get ruined, vehicle shakes due to faulty brakes. *slc
06/20/20001
 Vehicle experienced failure of the recall component (00v-136) prior to recall notification, consumer requesting reimbursement. *mjs
01/06/1998809/01/1997
 #1- concerning rusted rotors. (recall 98v005000/front brake rotors). we purchased this vehicle used 9-16-97. shortly thereafter we discovered that the vehicle had corosion/rusted rotors. we were informed by the service department, that the rusted rotors were not covered by the extended warranty we purchased. that was 4/98. september of 2000 i discovered the recall while doing some research. this time i contacted bobette thomas at jim marsh service about the rusted rotars. she took the information and called me back later that day. i was informed that the recall did not affect my vehicle. we purchased it used and do not know where it originated. we believe the rusted rotars are a product of improper manufacturing processes. i am requesting that jeep repair or replace the defective parts and honor the recall. #2 since purchasing this used vehicle we have had repeated fuel injector problems. we have taken it to be serviced for fuel odors on 8 different occassions in the past 3 years. on three of those occassions we were told nothing was wrong. yet the smell continued. there is obviously a problem with this vehicle's fuel injector system. again my vehicle is experiencing intermitant fuel odors. it is no longer under warranty and we a failure rate as extensive as ours has been is not acceptable. i believe had the original problem that is causing this repeated failure, been diagnosed when initially taken to the dealership our warranty would have resolved the issue. i would like this problem addressed in it's entirety. #3 rear hatchback doorlocks and latch. 1-12-98 i reported a lock problem and the closure problems i had been having. although i was given a new keyless entry remote. the rear hatch has never closed or locked 100% of the time. i recently discovered this part is also under recall. i would like jeep to repair or replace the parts in question. #4 front axle vibration listed on due bill. never corrected.*ak
06/09/1998108/30/1993
 Rotors grooved and brake pads worn causing vibration during braking. mjs
08/28/1999
 When brakes are applied, vehicle would jerk to the right. sounded like tin cans falling. would make a lot of noise. vehicle towed to dealer. consumer was informed that brake rotors were warped & needed to be changed. *ak
03/26/19961
 Front brake rotors & front brake calipers failed, causing the front brakes to vibrate & alignment problems. *yc
06/04/1996
 While driving approximately 30 to 40 mph and in the process of using brakes the steering wheel began to shake. consumer states that she has the same problem as recall #98v005000. *ak
01/23/1998105/01/1993
 The brakes when applied cause vehicle to jerk and then to slide due to bad rotors. consumer has contacted dealer. *ak
07/07/1995101/13/1993
 Brake rotors failed prior to recall notice.
1
 Brake rotors failed.
01/27/19981
 Rotors failed prior to recall notice.
110/01/1992
 Brake rotors failed causing complete brake loss prior to recall notice however dealership will not honor recall repair work.
06/02/19971
 Rotors corroded and separted resulting in grabbing, prior to recall notice.
10/06/19981
 While at 20 mph going around a curb consumer applied the brakes and the brakes went straight to the floorboard, causing the consumer to rear end another vehicle. the cosumer took the vehicle to the dealer, and they determined that the rotors were apart from the vehicle. *ak
02/02/1998
 The consumer has been experiencing problems associated with the defects described in recall # 98v005000 front brake rotors. every time that consumer applies brakes while going downhill, the car shakes tremendously. the manufacturer has not been contacted. *ak
02/02/19981
 Rotors failed.
01/17/19981
 Brake rotors failed prior to recall notice from corrosion.
04/10/1998107/22/1993
 Brake rotors failed.
07/24/1998106/01/1995
 Hub of the brake rotors corroded, causing the hub to separate from the rotors resulting in complete brake failure. also, vehicle was not included in recall #98v005000. *ak
 Front brake rotors experienced severe corrosion prior to recall 98v-005.000.
06/20/19983
 Consumer complaint that brake rotors have been replaced three times within the 60,000 mile of wear. consumer believed this condition is not considered to be normal. consumer contacted manufacturer manufacturer informed consumer that this codition is normal for the jeep products. *ak
101/24/1998
 Front rotors failed.
01/11/1997102/26/1993
 Right front brake rotor separated from the hub during hard, high speed braking. driver lost control because the brake failure cause the vehicle to steer left dramtically.
01/11/1997102/26/1993
 Right front rotor braking surface separated from the hub during a hard high speed braking situation. this failure caused vehicle to pull dramatically to the left.
06/01/19952
 Brake rotors failed.
03/16/1997201/03/1994
 Rotors failed.
09/01/1986208/01/1992
 Brake rotors failed, due to rust and being broken.
05/01/1995108/26/1994
 Brake rotors failed.
08/28/1996107/09/1997
 Rotors failed.
105/01/1993
 Brake rotors failed.
05/06/1997203/20/1993
 Brakes rotors failed, causing accident.
109/01/1993
 Brake rotors failed.
09/13/19971
 When applying the abs brakes, the front left rotor cracked in half, resulting in brake failure. *ak
10/01/1994107/01/1992
 Brake rotors failed.
03/11/19971
 Brakes rotors failed.
03/13/1997207/31/1997
 Front and rear brake rotors replaced.
03/17/1997112/20/1992
 Brake rotors cracked.
1
 Brake rotors worn.
106/17/1996
 Brake rotors failed.
01/01/1996107/25/1993
 Brake rotors corroded.
109/01/1996
 Brake rotors warped.
06/28/1996101/31/1993
 Brake rotors failed.
07/01/1994106/01/1994
 Front brake rotors failed.
05/20/1996104/05/1993
 Brake rotors failed, causing vibration.
05/18/1995105/20/1993
 Rotor rusted/pitted, causing pulsation.
105/01/1992
 Rotors warped.
07/01/1997101/31/1993
 Brake rotors failed.
10/01/19961
 Fron brake rotors failed.
06/26/1996108/19/1994
 Brake rotors rusted.
07/11/1997106/11/1995
 Brake rotors failed.
10/10/1996
 Owner has abs brakes, while trying to stop vehicle both front rotors fell apart, driver notes that he had to downshift and use emergency brake to stop vehicle; brake pads and calipers were in good shape. *ak
09/20/1996
 Both front rotors on the brakes split at the same time so there were no front brakes at all. the system has abs. *ak
06/10/1994508/01/1993
 Brake rotors continually fail.
09/10/1996
 Abs, brake failure, while driving applied brakes had complete brakes failure, rotor broke, causing knuckle to break and a loss of steering. *ak
08/08/1996102/01/1993
 When applying brakes, truck pulled to left. after inspecting, one of the front brake rotors was very rusty and other disintegrated. this allowed hub to turn freely.*ak consumer states front rotor rusted from heat and moisture until hub broke out of rotor leaving vehicle without any right front brake, front left rusted through but had not broken loose, consumer states hubs are made from very thin metal and evidently do not withstand heat. *slc
01/01/19931
 Front brake rotors warped, causing vibration in front end/steering when braking. *dsh
05/31/19941
 During brake application on curves vehicle starts to vibrate/shimmy, replaced right and rear brake rotors. *ak
 Front rotors wear unevenly with left needing replacement due to extensive damage. please describe details. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
104/01/1993
 Rear brakes were grabbing and thumping.
05/01/1997104/01/1993
 Rear brakes stick.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
1
 Brake drum out of round.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
07/20/199807/26/1993
 Rear brake linings separated,causing very strange noise after applying brakes.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
07/01/1997101/31/1993
 Wheel cylinders failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
01/27/19981
 Brake pads, caliper and hose failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
07/01/1995106/01/1994
 Master cylinder failed.
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
11/21/20001
 Dealer refused to do recall 92v-181 on vehicle, instead of repairing brake pedal and linkages, dealer did the brake rotor recall 98v-005, however rotors were replaced, but dealer left bad brake pads on causing the new rotor to get ruined, vehicle shakes due to faulty brakes. *slc
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE WARNING
09/01/199706/01/1993
 Brake light switch failed.