Jeep Wagoneer 1991
Model Wagoneer made in 1991 by Jeep got 2 consumer complains, 1 investigation there are 2 recalls as well as 10 service bulletins. Consumer complaints with reference, among others things, to engine and engine cooling, service brakes, hydraulic. Technical service bulletines regarding electrical system, equipment and latches/locks/linkages. The car had one investigation (suspension). There was one recall concerning service brakes, hydraulic .
Model 1991
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SERVICE BRAKES, HYDRAULIC - ANTILOCK | ||||||||||||||||
| 96V260000 | CHRYSLER CORPORATION | from 07/01/1988 to 06/30/1991 | V (Vehicle) | 52000 | 04/24/1997 | ODI | CHRYSLER GROUP LLC | 12/27/1996 | 01/13/1997 | |||||||
| Defect Summary | Vehicle description: vehicles equipped with antilock brake system (abs). the antilock brake system (abs) hydraulic control unit can experience excessive brake actuator piston seal wear which could cause pump-motor deterioration. | |||||||||||||||
| Consequence Summary | If this occurs, the abs function would be lose and reduced power assist would be experienced during vehicle braking. the instrument panel warning lights will signal system impairment and the base manual brakes will remain functional. | |||||||||||||||
| Corrective Summary | Dealers will test the vehicle's abs and repair as necessary. the warranty on all abs components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). owners will be reimbursed for previous abs component repair costs. | |||||||||||||||
| Notes | Owner notification began april 24, 1997. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-853-1403.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. | |||||||||||||||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | ||||||||||||||||
| 98V005000 | CHRYSLER CORPORATION | from 07/01/1989 to 07/31/1991 | V (Vehicle) | 293369 | 03/09/1998 | ODI | CHRYSLER GROUP LLC | 01/12/1998 | 01/22/1998 | |||||||
| Defect Summary | Vehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. the front disc brake rotors can experience severe corrosion if operated for an extensive period in the salt belt. if the rotors are not replaced, the corrosion can eventually compromise the structural integrity of the stamped steel center hub section of the rotor. | |||||||||||||||
| Consequence Summary | The reduced strength can allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle. | |||||||||||||||
| Corrective Summary | Dealers will replace these rotors with rotors that are coated with a corrosion protection. | |||||||||||||||
| Notes | Owner notification began march 9, 1998.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-992-1997.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM | |||||
| 0800600REV | 12/29/2000 | 080600 | 618049 | Subject regarding wire splice repairs. *sb | 04/03/2001 |
| ELECTRICAL SYSTEM - WIRING | |||||
| 080600 | 02/25/2000 | 609995 | This bulletin provides a revised wire splice procedure and related parts. *tt | 04/12/2000 | |
| EQUIPMENT - ELECTRICAL - RADIO/TAPE DECK/CD ETC. | |||||
| 081698 | 04/17/1998 | 600862 | Information on installation of radio transmitting equipment. *ak | 11/12/1999 | |
| LATCHES/LOCKS/LINKAGES - DOORS - LATCH | |||||
| 231693 | 03/01/1993 | 39539 | Redesigned liftgate latch. *tw | 11/01/1995 | |
| SEATS | |||||
| 2300800B | 11/24/2000 | 230800A | 615688 | Subject regarding child seat tether anchors. *tt | 01/28/2001 |
| 230800 | 03/03/2000 | 233599A | 610635 | Subject regarding child seat tether anchors. *tt | 05/09/2000 |
| 233599 | 09/03/1999 | 607963 | Information on child seat tether anchors. *tt | 10/21/1999 | |
| STRUCTURE - BODY | |||||
| 233599REVA | 10/01/1999 | 233599 | 612160 | Subject on the child seat tether anchors. *mjs | 06/06/2000 |
| STRUCTURE - FRAME AND MEMBERS | |||||
| 230397 | 02/14/1997 | 51942 | Difficult to clean light colored chalky residue from plastic body components that are molded in black. *tw | 07/17/1997 | |
| VEHICLE SPEED CONTROL | |||||
| 081695REVA | 10/01/1995 | 08-16-95 | 46371 | Bulletin supersedes technical service bulletin 08-16-95, dated apr. 14, 1995. if the vehicle operator **repeatedly** presses and releases the set button with their foot off of the accelerator (a 'lift foot set' to begin speed control oper | 04/25/1996 |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| SUSPENSION | ||||||
| PE95049 | CHRYSLER GROUP LLC | 08/17/1995 | 01/26/1996 | REAR AXLE SHAFT SEPARATION | ||
| This investigation was opened to examine the failure mode and the risk to motor vehicle safety posed by allegations of rear axle separations.the rear axle shaft and housing design is typical of those in which the weight of the vehicle is carried on the axle housing.the left and right axle shafts, supported by roller bearings, are situated inside the axle housing.the inboard splined end of the axle shaft receives power transmitted from the differential assembly, providing torque to the rear wheels.the allegations are that the axle shaft fails, resulting in the separation of a wheel and axle hub assembly or the entire axle shaft and wheel assembly, depending on the location of the axle shaft failure.as identified by chrysler, the subject rear axles are dana 35c and 35cm models, which have been used on the subject vehicles since the 1990 model year.a safety defect trend with respect to the subject axle shafts has not been identified.see hard copy resume for full text of summary. | ||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE - GASOLINE | |||
| When traveling at any speed the vehicle will cut off with no prior warning. consumer has contacted the dealer. *ak | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
| 04/13/1996 | 1 | ||
| Brake rotors failed resulting in vehicle collision prior to recall notice. | |||