Kenworth T2000 2001

Model T2000 made in 2001 by Kenworth got 5 consumer complains there are 5 recalls as well as 2 service bulletins. Consumer complaints with reference to service brakes, hydraulic. . Technical service bulletines regarding engine and engine cooling. There were some recalls concerningpower train, suspension and trailer hitches.

Model 2001

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
POWER TRAIN - DRIVELINE - UNIVERSAL JOINT
01V335000PACCAR, INCORPORATEDfrom 09/26/2001 to 10/10/2001V (Vehicle)23711/26/2001MFRPACCAR INCORPORATED10/25/200110/31/2001
Defect SummaryVehicle description: heavy duty trucks. the driveline u-joint fasteners at the output yoke of the transmission were improperly tightened.
Consequence SummaryUnder-tightened fasteners can lead to the driveline becoming detached from the vehicle resulting in property damage or personal injury.
Corrective SummaryDealers will tighten the driveline fasteners to the proper specification. owner notification began november 26, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
NotesAlso contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SUSPENSION - FRONT - CONTROL ARM - LOWER ARM
01V051000PACCAR, INCORPORATEDfrom 02/19/1996 to 02/09/2001V (Vehicle)20903/27/2001MFRPACCAR INCORPORATED02/20/200102/28/2001
Defect SummaryVehicle description: vehicles equipped with 54 rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. the rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
Consequence SummaryFailure of the lower sway arm attaching bolts could result in loss of vehicle control.
Corrective SummaryDealers will replace the lower sway arm brackets. owner notification began march 27, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
NotesAlso contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SUSPENSION - FRONT - HUB
03V125000PACCAR INCORPORATEDfrom 09/02/1998 to 12/06/2001V (Vehicle)15407/16/2003ODIPACCAR INCORPORATED04/01/200304/15/2003
Defect SummaryOn certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Consequence SummarySeizure of the bearings can cause wheel separation or wheel end fire.
Corrective SummaryDealers will replace all front axle hubs. notification began july 16, 2003. the manufacturer has advised us that parts will not be available until september 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
NotesKenworth recall no. 03kw2 and peterbilt recall no. 303-a.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
TRAILER HITCHES - FIFTH WHEEL ASSEMBLY
03V168000PACCAR INCORPORATEDfrom 07/18/2001 to 05/15/2003V (Vehicle)48306/18/2003MFRPACCAR INCORPORATED05/05/200305/15/2003
Defect SummaryOn certain trucks equipped with jost international jsk 37u series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.
Consequence SummaryIf left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.
Corrective SummaryDealers will replace the bracket pins and repair instructions free of charge. peterbilt's owner notification began june 20, 2003. kenworth's owner notification began june 12, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
NotesPeterbilt recall no. 403-c/kenworth recall no. 03kw4.also, customers can contact the national highway traffic safety administration
UNKNOWN OR OTHER
03V234000PACCAR INCORPORATEDfrom 03/24/2001 to 03/24/2001V (Vehicle)8407/29/2003MFRPACCAR INCORPORATED07/01/200307/03/2003
Defect SummaryOn certain heavy duty trucks equipped with vertical tail pipes, the frame access grabhandle is mounted too high.
Consequence SummaryThis condition could cause a person to slip and/or fall and could lead to personal injury.
Corrective SummaryDealers will inspect the grabhandle location and if determined to be mounted too high, the handle will be relocated to the proper height. owner notification began july 29, 2003. owners should contact kenworth at 1-425-828-5440.
NotesKenworth recall no. 03kw5.customers can also contact the national highway traffic safety administration

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - ENGINE - DIESEL
TIB-44-1710/23/200810027646Kenworth trucks: reduced engine power from fuel starvation. any model kenworth equipped with the 2007 emissions compliant isx engine and optional davco 382 fuel filter, built prior to 8/11/08, *pe01/27/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL
TIB-44-1710/23/200810027646Kenworth trucks: reduced engine power from fuel starvation. any model kenworth equipped with the 2007 emissions compliant isx engine and optional davco 382 fuel filter, built prior to 8/11/08, *pe01/27/2009

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC
08/18/2011810000
 Brake cam brackets on rear axle broke due to poor welding.