Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
91V134000FORD MOTOR COMPANY V (Vehicle)32500009/26/1991ODIFORD MOTOR COMPANY08/06/199108/07/1991
Defect SummaryFront disc brake rotors of the subject vehicles may experience severe corrosion if operated in areas where calcium chloride and sodium chloride are used extensively.
Consequence SummarySeverely corroded rotors may fracture or separate nearthe inner edges of the brake discs resulting in reduced braking effectiveness,higher than normal pedal efforts, loud grinding noises, and moderate pulls whenthe brakes are applied. reduced braking effectiveness may increase minimumstopping distances, possibly resulting in an accident.
Corrective SummaryReplace front brake rotors with full cast front brake rotors.
NotesSystem: brakes.vehicle description: passenger vehicles sold or registered in the following states: ct, il, in, me, ma, mi, nh, nj, ny, oh, pa, ri, vt, and wi.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A603/18/1998601004Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc12/14/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - ANTILOCK - ABS WARNING LIGHT
BC350397230101/23/199751491The abs/red brake/air suspension lamps coming on, check for a bad ground on circuit 430. *jd06/27/1997
BC101849723001/23/199751540The abs/red brake/air suspension lamps coming on, check for a bad ground on circuit 430. *jd06/27/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
956603/01/19953020102Unknown11/01/1995

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
PE88100FORD MOTOR COMPANY09/06/198804/17/1989ABS FAILURE
 There is no summary currently available
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134002
 There is no summary currently available
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134000
 There is no summary currently available
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134001
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC - ANTILOCK
03/01/1999
 R/r brake engages or remains engaged sporadically causing extreme overheating and a fire (one occasion). dealer unable to correct problem on the two occasions it was towed in. *ak
2
 When traveling and upon depressing the brake pedal to make a normal stop, the pedal traveled to the floorboard,resulting in extended stopping distance. consumer has contacted the dealer, dealer has inspected and repaired the vehicle, and the problem still exists. *ak
08/20/199710
 Abs: power brakes went out while driving 50 mph, nearly causing a crash, only manual reserve brakes worked. *ak
09/14/19961
 Antilock brake failed, causing accident.
01/29/19969
 Antilock brakes failed. *sd
01/02/1995
 Abs brakes light keeps coming on, experienced total loss of brakes. tt
09/01/1995
 Abs, brake failure replaced the brake systems, impact 12:00, speed 3 mph, extended stopping distance , pedal went to the floor. tt
01/27/1995
 Abs: total brake failure, including emergency brakes, while coming to stop; pedal went to floor; coasted to stop; speed 20 mph; no warning. tt
SERVICE BRAKES, HYDRAULIC - ANTILOCK - ABS WARNING LIGHT
1
 Recall repair not performed on anti lock brake warning light due to vin.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
10/27/19960
 While driving down street attempted to apply brakes and there were none, the vehicle had no power of electrical current at all. *ak
08/21/19961
 Brake failure. *ak
01/29/19969
 Brake failure. *sd
01/29/19969
 Brakes failed. *sd
10/30/1995
 The power brakes fail by applying the brakes and they do not stop the car. please describe. tt
12/20/19941
 Brakes failed, causing loss of control. *skd
12/02/19941
 Brakes failed, resulting in loss of control.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
1
 Brake pads/shoes failed.
10/01/19881
 Brake pad overheated, can't turn them. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
 Recall repair 91v-134 of the brake rotors was not repaired in a timely manner due to lack of parts. nlm
1
 Rotors failed.
03/01/19951
 Front brake rotors overheat.
10/01/1988
 Brake rotor overheated, can't turn them. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
05/01/2000212/01/1988
 Fuel line from gas tank to engine is leaking at right door pillar undrbody. inspection reveals the gas line to be plastic of some type, and the leak is at the junction of where 2 lenghts of fuel line are joined together at the factory. imminent fire hazard. have seen this problem before on mecury sables and ford taurus' second problem, rear sway bar, rear sway bar is attached to the body, but the 2 suspension links that attach to the ends of the sway bar are broken or rusted. vehicle handles diffently while manuevering, feel this to be major concern as well . *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
09/05/19955
 Brakes master cylinder failed. *dsh
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
08/26/1996
 Ignition switch overheats, sends too much current, subject to short, causing loss of power brakes. *ak