Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
91V134000FORD MOTOR COMPANY V (Vehicle)32500009/26/1991ODIFORD MOTOR COMPANY08/06/199108/07/1991
Defect SummaryFront disc brake rotors of the subject vehicles may experience severe corrosion if operated in areas where calcium chloride and sodium chloride are used extensively.
Consequence SummarySeverely corroded rotors may fracture or separate nearthe inner edges of the brake discs resulting in reduced braking effectiveness,higher than normal pedal efforts, loud grinding noises, and moderate pulls whenthe brakes are applied. reduced braking effectiveness may increase minimumstopping distances, possibly resulting in an accident.
Corrective SummaryReplace front brake rotors with full cast front brake rotors.
NotesSystem: brakes.vehicle description: passenger vehicles sold or registered in the following states: ct, il, in, me, ma, mi, nh, nj, ny, oh, pa, ri, vt, and wi.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A603/18/1998601004Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc12/14/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
956603/01/19953020102Unknown11/01/1995

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK
10/30/199910/01/1999
 No summary listed for above vehicle. *ak
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
1
 Speed contol sensors failed.
SERVICE BRAKES, HYDRAULIC
 Brakes locked up and were smoking. vehicle would not move and had to be towed. repair service could find nothing wrong and vehicle working fine.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
07/15/1999
 While driving along the highway at approximately 20mph and if applying brakes, the brakes will not go down, and will not release the vehicle. to go consumer has to pull over to the side for a complete stop. *ak
06/24/1999
 When applying the brakes the car starts to shake. also affects the steering.dealer attempted to fix the problem , but it has reoccurred. *ak
06/01/19984
 Lugs: bolts have sheared off 4 times on front. tire left holding by one lug bolts on 4 occasions. lugs: bolts have been replaced with factory spec bolts and by ford dealer. the tire is about ready to fall off the car, and doing 70 mp we were extremely fortunate not to have it completly separate. front end suspension has been repaired. brakes check rims replaced. this is a definite safety hazard. *ak
06/24/1997
 Engine head gasket blew out and burned water and gas. dealer not aware of problem, and repairwork done at owner's expense. also abs lightcontinuously flashes on and off, dealer not aware, problem still exists. provide further information. *ak
 Abs failure; upon start up abs light flashes, as should, but, when light goes off, experiences intermittent brake lock up, when abs light reappears and stays on vehicle can be driven, pedal pulsates, must put foot under pedal, then pump up brakes.*ak
 Abs failure; upon starting up abs light flashes, when placed into drive position, experienced. intermittent abs lock up, and reappearence of abs light continuous, pedal pulsation, also, must place foot under pedal, then pump up brakes. *ak
05/01/1996
 Abs, brake pedal sticks, causing loss of effectiveness, red light comes on. *ak
06/01/1992211/07/1991
 When stepping on brakes front end shakes.*ak consumer states front end started to vibrate it would shake when brakes were being applied, front rotors were replaced, within nine months began shaking again, front rotors were then removed on second occasion and replaced again, consumer was advised by mechanic that this is a common problem and will occur periodically , the rotors are of such poor quality and may need replacing anually.*jb
04/25/19965
 Brakes chatter/vibrate. *sd
06/12/19951
 Brakes locked up when applied, pedal went all the way to the floor. *ak *ak
06/19/1995
 Abs system failure, system come on when not even braking. tt
03/06/19951
 After coming out of an automatic car wash, for several minutes, brakes fail, resulting in extended stopping disrance. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
03/05/2002
 While pulling up driveway with foot on brake vehicle suddenly surged forward, hitting another vehicle. brakes would not hold.*ak
08/22/19971
 Front and rear brakes failed. nlm
 Brakes would work fine in cold weather. as soon as disc hubs gets warmed up after traveling 50 miles, they would smell like burning rubber. would apply brakes & would have no brakes. been to dealer & mechanic changed entire brake system. the problem still exists. *ak
06/04/1998
 The braking system malfunctioned, causing extended stopping distance. also, mechanic replaced rotors and pads twice. problem still exists. please provide further information. *ak
10/24/1996307/13/1991
 Brakes locking up causing brake components and wheels to overheat.
11/01/1993112/01/1991
 Brakes replaced.
12/19/1994106/19/1991
 Brake noise.
05/01/19951
 Brakes replaced. *sd
08/08/19941
 While driving, brakes engage without driver pressing the pedal, pedal hard. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
 Brakes would work fine in cold weather. as soon as disc hubs gets warmed up after traveling 50 miles, they would smell like burning rubber. would apply brakes & would have no brakes. been to dealer & mechanic changed entire brake system. the problem still exists. *ak
06/04/1998
 The braking system malfunctioned, causing extended stopping distance. also, mechanic replaced rotors and pads twice. problem still exists. please provide further information. *ak
06/01/1992211/07/1991
 When stepping on brakes front end shakes.*ak consumer states front end started to vibrate it would shake when brakes were being applied, front rotors were replaced, within nine months began shaking again, front rotors were then removed on second occasion and replaced again, consumer was advised by mechanic that this is a common problem and will occur periodically , the rotors are of such poor quality and may need replacing anually.*jb
05/02/19941
 Warped front brake rotors/pads, causing vehicle to vibrate upon braking. *ak
05/03/19933
 Front brake assembly replaced.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
06/14/19951
 Rep;laced caliper assembly. *ak
06/14/19951
 Replaced caliper assembly. *ak
01/02/19951
 Left front caliper hanging.. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
3
 Brake shoes and rotors replaced several times.
04/25/19965
 Brake pads replaced. *sd
06/14/19951
 Replaced rear pads. *ak
10/12/19941
 Brake pads/rotors replaced due to grabing and vibration. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
07/19/19991
 Brake light switch and rotor failure caused smoke to come from wheels and dashboard indicator/computer to fail. mjs
01/04/19981
 Brake rotors repaired. mjs
3
 Brake shoes and rotors replaced several times.
04/25/19965
 Rotors replaced due to vibration. *sd
10/01/19951
 Brake rotors replaced 5 times. *sd
12/01/1995
 Front disc rotors are warping, partial loss of braking. tt
06/14/19951
 Replaced rear rotors. *ak
03/06/19951
 Warped brake rotors, causing vehicle to shake/vibrate. *ak
06/09/19941
 Front brake rotors/pads failed prior to recall (91v-134). *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
05/17/1999111/01/1998
 Front & rear brake drums sticking when slowing down, & not releasing.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
105/17/1996
 Power brake booster failed causing the vehicle to perform poorly. nlm
06/12/1998
 Brake pedal sometimes does not fully return causing the vehicle to drag. placing foot under the pedal and lifting it is the only way to correct. this is caused by failing power brake boosters.
02/20/19950
 Brake power booster failed, preventing brake pedal from returning to its proper position after braking. *skd
03/06/19951
 Front end vibrates violently due to a weak spring in the brake booster. *ak
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
07/19/19991
 Brake light switch and rotor failure caused smoke to come from wheels and dashboard indicator/computer to fail. mjs
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE WARNING
1
 The cruise control failed to disengage when the brake pedal was depressed. the brake light switch failed. scc
09/19/1994109/01/1991
 Brake message display alarm malfunctioned due to a failed wire.