Mack Cxn 2002

Model Cxn made in 2002 by Mack got 2 recalls as well as 12 service bulletins. Technical service bulletines regarding engine and engine cooling and fuel system, other. There were some recalls concerningfuel system, diesel and fuel system, gasoline.

Model 2002

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
FUEL SYSTEM, DIESEL
07V401000MACK TRUCKS, INCfrom 01/01/2002 to 01/01/2002V (Vehicle)3564909/11/2007MFRMACK TRUCKS, INC09/05/200709/05/2007
Defect SummaryOn certain trucks equipped with aset ac model engines, the engine as configured with an external exhaust gas recirculation system makes servicing the fuel injection lines difficult when using traditional tools. therefore, it is possible for fuel leaks to develop when removing and installing the fuel injection lines.
Consequence SummaryA leak in the fuel injection line may spray fuel on the hot surfaces of the exhaust gas recirculation system, which could result in an engine fire.
Corrective SummaryDealers will replace the fuel injection lines free of charge. note: this recall supersedes a previous campaign conducted in 2006 (please see 06v392). the recall began on september 11, 2007, with subsequent mailings every six weeks until april 2008. owners may contact mack at 800-528-6586.
NotesMack recall no. sc0324.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS
05V015000MACK TRUCKS, INCfrom 08/01/2002 to 12/31/2004V (Vehicle)1317302/14/2005MFRMACK TRUCKS, INC01/14/200501/26/2005
Defect SummaryOn certain heavy duty class 8 diesel trucks equipped with aset ac engines, the location of the fuel inlet hose may result in overheating or abrasion of the hose, which may lead to a premature failure.
Consequence SummaryIf the hose fails, fuel can be sprayed on the exhaust manifold, which could potentially lead to an engine compartment fire.
Corrective SummaryDealers will repair and replace the fuel inlet hose free of charge. the recall began on february 14, 2005. due to some quality and supply issues with parts to support this safety recall, owners may have been informed during april 2005,that the safety recall was on hold. these issues have now been resolved. for owners who have not had their vehicle(s) repaired, contact a mack parts and service center immediately to schedule an appointment to have your vehicle(s) repaired. owners may contact mack trucks at 610-709-2131.
NotesMack trucks recall no. sc0292.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - COOLING SYSTEM
SB-26-101802/13/200910028749Mack trucks: meritor wabco air compressor, conventional repair for certain air compressor failures, such as failure of compressor to pump, slow air system pressure build up time, intermittent compressor pumping, etc, was to replace compres05/22/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
23401011/03/200410011594Vertical exhaust stack heat shield clamps. mack cxn, chn models. *tt01/27/2005
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
FSB-214-02401/01/201110040051Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm08/15/2011
FSB-214-02401/01/201110040051Ready08/15/2011
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY
SB-561-02108/01/201010037020Ready04/27/2011
SB-561-02108/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm04/27/2011
SB-561-02110/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm all models ilo. updated 5/5/11. *pe04/27/2011
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY - MOUNTING
SB-561-02108/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm04/27/2011
SB-561-02110/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm all models ilo. updated 5/5/11. *pe04/27/2011
SB-561-02108/01/201010037020Ready04/27/2011
POWER TRAIN - AXLE ASSEMBLY
TSB-51700911/21/200810030224Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe08/27/2009
SUSPENSION
12103106/09/200612103110020362Suspension crossmembers - cxn and chn models equipped with mack al suspension. *tt09/20/2006