Mack Cxn 2006

Model Cxn made in 2006 by Mack got 3 investigations there are 13 recalls as well as 13 service bulletins. Technical service bulletines regarding engine and engine cooling, fuel system, other and power train. The car had one investigation (service brakes, air). There were some recalls concerningexterior lighting, fuel system, diesel and parking brake.

Model 2006

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
EXTERIOR LIGHTING - HEADLIGHTS - SWITCH
08V688000MACK TRUCKS, INC V (Vehicle)3426902/27/2008MFRMACK TRUCKS, INC12/23/200812/24/2008
Defect SummaryMack is recalling 34,269 my 1999-2005 cx and my 2004-2008 cxn trucks. the headlight switch may prematurely fail resulting in inoperative or intermittent headlights.
Consequence SummaryThe head lights may not operate properly which could result in intermittent or no headlight function. this could impair a driver's visibility, increasing the risk of a crash.
Corrective SummaryDealers will replace the headlight switch. the recall began on february 27, 2009. owners may contact mack at 1-800-528-6586.
NotesMack recall no. sc0342.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
FUEL SYSTEM, DIESEL
06V290000MACK TRUCKS, INCfrom 02/04/2004 to 04/03/2006V (Vehicle)34208/20/2006MFRMACK TRUCKS, INC08/03/200608/03/2006
Defect SummaryOn certain trucks, the fuel line crossover bracket may prematurely fail and unexpectedly fall to the road. the location and size of the bracket draws a concern to the bracket being picked up and thrown by the drive axle wheels.
Consequence SummaryIf the crossover bracket falls a crash may occur without prior notice.
Corrective SummaryDealers will replace the brackets free of charge. the recall began on august 20, 2006. owners may contact mack trucks at 1-800-528-6586.
NotesCustomers may also contact the national highway traffic safety administration
06V392000MACK TRUCKS, INCfrom 01/01/2002 to 10/31/2006V (Vehicle)40204MFRMACK TRUCKS, INC10/13/200610/13/2006
Defect SummaryOn certain trucks, a leak in the aset ac fuel injection line may spray fuel on the exhaust gas recirculation pipes that carry hot exhaust gases .
Consequence SummaryThis could potentially result in an engine fire.
Corrective SummaryMack has issued a stop work on this campaign under further notice (2-22-2007). the remedy does not adequately address the issue on all vehicles. mack will re-release the recall in the near future. (please see nhtsa no. 07v159/mack recall no. sco323 for vehicles that have had this repair already performed.) this recall has been superseded (please see 07v401/sc0324).
NotesMack trucks recall no. sc0317.customers can also contact the national highway traffic safety administration?s vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
07V401000MACK TRUCKS, INCfrom 01/01/2002 to 01/31/2007V (Vehicle)3564909/11/2007MFRMACK TRUCKS, INC09/05/200709/05/2007
Defect SummaryOn certain trucks equipped with aset ac model engines, the engine as configured with an external exhaust gas recirculation system makes servicing the fuel injection lines difficult when using traditional tools. therefore, it is possible for fuel leaks to develop when removing and installing the fuel injection lines.
Consequence SummaryA leak in the fuel injection line may spray fuel on the hot surfaces of the exhaust gas recirculation system, which could result in an engine fire.
Corrective SummaryDealers will replace the fuel injection lines free of charge. note: this recall supersedes a previous campaign conducted in 2006 (please see 06v392). the recall began on september 11, 2007, with subsequent mailings every six weeks until april 2008. owners may contact mack at 800-528-6586.
NotesMack recall no. sc0324.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
PARKING BRAKE
07V360000MACK TRUCKS, INCfrom 11/04/2005 to 05/01/2007V (Vehicle)1880501/10/2008MFRMACK TRUCKS, INC08/15/200708/16/2007
Defect SummaryOn certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence SummaryThis could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Corrective SummaryMack is working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on january 10, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
NotesMack recall no. sc0335 (sc0328).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
SERVICE BRAKES, AIR
05V441000MACK TRUCKS, INCfrom 02/01/2004 to 06/30/2005V (Vehicle)143302/27/2006MFRMACK TRUCKS, INC09/26/200509/29/2005
Defect SummaryOn certain vehicles, the brake cam tubes on the steer and drive axles may not have been greased.
Consequence SummaryThe brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
Corrective SummaryDealers will remove the brake camshaft to inspect for corrosion. the brake camshaft will be replaced as required free of charge. the recall began on february 27, 2006. owners may contact mack at 1-336-393-2233.
NotesMack recall no. sc0306.customers may also contact the national highway traffic safety administration
05V438000MACK TRUCKS, INCfrom 02/01/2004 to 06/30/2005V (Vehicle)258202/27/2006MFRMACK TRUCKS, INC09/26/200509/29/2005
Defect SummaryOn certain vehicles, the brake cam tubes on the steer axle may not have been greased.
Consequence SummaryThe brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
Corrective SummaryDealers will remove the brake camshaft to inspect for corrosion. the brake camshaft will be replaced as required free of charge. the recall began on february 27, 2006. owners may contact mack at 1-336-393-2233.
NotesMack recall no. sc0304.customers may also contact the national highway traffic safety administration
05V439000MACK TRUCKS, INCfrom 02/01/2004 to 06/30/2005V (Vehicle)267901/18/2006MFRMACK TRUCKS, INC09/26/200509/29/2005
Defect SummaryOn certain vehicles. the brake cam tubes on the drive axle may not have been greased.
Consequence SummaryThe brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
Corrective SummaryDealers will remove the brake camshaft to inspect for corrosion. the brake camshaft will be replaced as required free of charge. the recall began on january 18, 2006. owners may contact mack at 1-336-393-2233.
NotesMack recall no. sc0305.customers may also contact the national highway traffic safety administration
05V442000MACK TRUCKS, INCfrom 06/01/2005 to 08/31/2005V (Vehicle)140810/24/2005MFRMACK TRUCKS, INC09/26/200509/29/2005
Defect SummaryOn certain vehicles, the brake cam tubes on the steer and drive axles may not have been greased.
Consequence SummaryThe brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
Corrective SummaryDealers will add grease to the brake cam tubes free of charge. the recall began on october 24, 2005. owners may contact mack at 1-336-393-2233.
NotesMack recall no. sc0307.customers may also contact the national highway traffic safety administration
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE
07V361000MACK TRUCKS, INCfrom 01/02/2004 to 07/26/2007V (Vehicle)2184701/09/2008MFRMACK TRUCKS, INC08/15/200708/16/2007
Defect SummaryOn certain trucks equipped with parker single check valves (scv) provided by bendix. the defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. after prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve.
Consequence SummaryThis condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. these conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes.
Corrective SummaryMack is working with bendix to replace the parker single check valve. the recall began on january 9, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
NotesMack recall no. sc0334 (sc0327).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
STEERING
05V178000MACK TRUCKS, INCfrom 05/26/2004 to 04/06/2005V (Vehicle)277305/06/2005MFRMACK TRUCKS, INC04/28/200504/28/2005
Defect SummaryOn certain heavy duty class 8 vehicles built with sheppard model m100 steering gear, the steering gear mounting pads, which attach the steering gear to the frame rail, may fail.
Consequence SummaryThe steering gear could loosen leading to a sudden loss of steering, which could result in a crash.
Corrective SummaryDealers will replace the steering gears. the recall began on may 6, 2005. owners may contact mack at 1-610-709-2131.
NotesMack recall no. sco298. customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
TRAILER HITCHES - FIFTH WHEEL ASSEMBLY
07V497000MACK TRUCKS, INCfrom 01/09/2006 to 06/29/2007V (Vehicle)95001/28/2008MFRMACK TRUCKS, INC10/23/200710/23/2007
Defect SummaryOn certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. an over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
Consequence SummaryThere is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
Corrective SummaryDealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. the recall began on january 28, 2008. owners may contact mack trucks at 1-800-528-6586.
NotesMack trucks recall no. sc0331.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
WHEELS
05V184000MACK TRUCKS, INCfrom 02/21/2005 to 03/23/2005V (Vehicle)5806/17/2005MFRMACK TRUCKS, INC04/22/200504/28/2005
Defect SummaryOn certain heavy duty class 8 trucks equipped with accuride aluminum wheels, the wheels were not properly pre-stressed. this allows cracks to develop over time.
Consequence SummaryThis may eventually lead to wheel failure and possibly result in a vehicle crash.
Corrective SummaryDealers will replace the wheels free of charge. the recall began on june 17, 2005. owners may contact mack trucks at 610-709-2131.
NotesMack trucks recall no. sc0297. customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - COOLING SYSTEM
SB-26-101802/13/200910028749Mack trucks: meritor wabco air compressor, conventional repair for certain air compressor failures, such as failure of compressor to pump, slow air system pressure build up time, intermittent compressor pumping, etc, was to replace compres05/22/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
FSB-214-02401/01/201110040051Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm08/15/2011
FSB-214-02401/01/201110040051Ready08/15/2011
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY
SB-561-02108/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm04/27/2011
SB-561-02110/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm all models ilo. updated 5/5/11. *pe04/27/2011
SB-561-02108/01/201010037020Ready04/27/2011
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY - MOUNTING
SB-561-02108/01/201010037020Ready04/27/2011
SB-561-02108/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm04/27/2011
SB-561-02110/01/201010037020Mack trucks: a new cooling tank requires re-routing of the compressor discharge line. *rm all models ilo. updated 5/5/11. *pe04/27/2011
POWER TRAIN - AXLE ASSEMBLY
TSB-51700911/21/200810030224Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe08/27/2009
SUSPENSION
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009
12103106/09/200612103110020362Suspension crossmembers - cxn and chn models equipped with mack al suspension. *tt09/20/2006
SUSPENSION - REAR
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, AIR
EA09009MACK TRUCKS, INC06/18/200908/13/2010AIR BRAKE SYSTEM CONTROL VALVES
 Investigation has not identified a defect.complaints have abated.see closing report for further details.
EA09009MACK TRUCKS, INC06/18/2009AIR BRAKE SYSTEM
 Odi is opening this engineering analysis to further identify and evaluate the vehicle environment and brake system factors that may be causing or contributing to extended stopping distance performance in certain vehicles.
SERVICE BRAKES, AIR - CONTROLS
PE09010MACK TRUCKS, INC02/13/200906/18/2009AIR BRAKE CONTROL VALVE
 Odi is closing this preliminary evaluation and opening an engineering analysis (ea09-009) to further identify and evaluate the vehicle environment and brake system factors that may be causing or contributing to extended stopping distance perfromance in certain vehicles.