Mack Cxp 2006

Model Cxp made in 2006 by Mack got 1 recall as well as 18 service bulletins. Technical service bulletines regarding engine and engine cooling and equipment. There was one recall concerning trailer hitches .

Model 2006

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
TRAILER HITCHES - FIFTH WHEEL ASSEMBLY
07V497000MACK TRUCKS, INCfrom 01/09/2006 to 06/29/2007V (Vehicle)95001/28/2008MFRMACK TRUCKS, INC10/23/200710/23/2007
Defect SummaryOn certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. an over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
Consequence SummaryThere is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
Corrective SummaryDealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. the recall began on january 28, 2008. owners may contact mack trucks at 1-800-528-6586.
NotesMack trucks recall no. sc0331.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING
SB-262-00812/01/201010037935Mack trucks: there is a new thermostat seal and cover to prevent coolant leakage. *rm06/08/2011
SB-262-00812/01/201010037935Ready06/08/2011
ENGINE AND ENGINE COOLING - ENGINE - DIESEL
SB-21405201/10/200810032350Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no.03/10/2010
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
SB-214-02411/01/201010037488Ready05/24/2011
SB-214-02411/01/201010037488Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm05/24/2011
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
FSB-214-02401/01/201110040051Ready08/15/2011
FSB-214-02401/01/201110040051Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm08/15/2011
SB-21405201/10/200810032350Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no.03/10/2010
EQUIPMENT - ELECTRICAL - AIR CONDITIONER
SB-63501201/04/200810032348Mack truck: fine particulate filter for hvac units-cxu, chu, gu, cxp and ctp models. a pleated fine particulate hvac filter (part no. 85112361) has been developed for the hvac units in certain models. no model years listed.03/10/2010
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL
SB-214-02411/01/201010037488Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm05/24/2011
SB-214-02411/01/201010037488Ready05/24/2011
POWER TRAIN - AXLE ASSEMBLY
TSB-51700911/21/200810030224Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe08/27/2009
POWER TRAIN - CLUTCH ASSEMBLY
SB-31300401/23/200810032351Mack truck: revised air assist clutch cable. effective 9/17/07, a revised air assist clutch cable (part no. 27rc410m) was implemented into production on cxu, chu, and gu model chassis. no model years listed. *pe03/10/2010
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
POWER TRAIN - CLUTCH ASSEMBLY - BELL HOUSING
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
SUSPENSION
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009
SUSPENSION - REAR
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009