Mack Cxp 2007

Model Cxp made in 2007 by Mack got 6 recalls as well as 26 service bulletins. Technical service bulletines regarding electrical system and engine and engine cooling. There were some recalls concerningfuel system, diesel and parking brake.

Model 2007

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
FUEL SYSTEM, DIESEL
07V346000MACK TRUCKS, INCfrom 12/01/2006 to 03/16/2007V (Vehicle)12109/10/2007MFRMACK TRUCKS, INC08/07/200708/08/2007
Defect SummaryOn certain trucks, an unprotected lead in the thermoswitch of the heater may make contact with another post possibly creating a short circuit, which can result in continuous operation of the heating element.
Consequence SummaryIf the condition exists and the key is left on without fuel in the filter, the heating element may heat to a point where a flame becomes present at the tip of the element which could result in a vehicle fire.
Corrective SummaryDealers will inspect the thermoswitch and will replace it if necessary. the recall began on september 10, 2007. owners may contact mack trucks at 1-800-528-6586.
NotesMack recall no. sc0325.customers may also contact the national highway traffic safety administration
PARKING BRAKE
07V360000MACK TRUCKS, INCfrom 11/04/2005 to 05/01/2007V (Vehicle)1880501/10/2008MFRMACK TRUCKS, INC08/15/200708/16/2007
Defect SummaryOn certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence SummaryThis could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Corrective SummaryMack is working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on january 10, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
NotesMack recall no. sc0335 (sc0328).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
POWER TRAIN - AXLE ASSEMBLY
07V123000MACK TRUCKS, INCfrom 11/01/2006 to 01/31/2007V (Vehicle)5104/09/2007MFRMACK TRUCKS, INC03/21/200703/21/2007
Defect SummaryOn certain trucks, the axle housings may have been manufactured with steel that was out of specification which could result in a fatigue failure over time.
Consequence SummaryIf a fatigue failure occurs and is left unattended, the axle may lock up or the end of the axle could come off, which could result in a vehicle crash.
Corrective SummaryDealers will inspect and replace the axles free of charge. the recall is expected to begin on or about april 9, 2007. owners may contact mack trucks at 1-800-528-6586.
NotesMack trucks recall no. sc0322.customers may contact the national highway traffic safety administration
SERVICE BRAKES, AIR
06V367000MACK TRUCKS, INCfrom 05/08/2006 to 06/07/2006V (Vehicle)110209/25/2006MFRMACK TRUCKS, INC09/26/200609/26/2006
Defect SummaryOn certain trucks, the brake cam tubes on the steer and drive axles may not have been greased.
Consequence SummaryThe brake cam journals may corrode which may lead to the brakes dragging which could result in a vehicle fire.
Corrective SummaryDealers will add grease to the brake cam tubes free of charge. the recall began on september 29, 2006. owners may contact mack at 1-800-866-1177.
NotesCustomers may also contact the national highway traffic safety administration
STEERING
07V023000MACK TRUCKS, INCfrom 10/02/2006 to 12/07/2006V (Vehicle)208502/12/2007MFRMACK TRUCKS, INC02/01/200702/01/2007
Defect SummaryOn certain trucks, the nut that retains the steering wheel may not have been installed.
Consequence SummaryIf the retaining nut was not installed, the steering wheel may come off, which could result in a vehicle crash.
Corrective SummaryDealers will remove the horn button to confirm that the retaining nut was installed. a retaining nut will be added if the nut is missing. the recall began on february 12, 2007. owners may contact mack trucks at 800-866-1177.
NotesMack recall no. sc0319.customers may also contact the national highway traffic safety administration
TRAILER HITCHES - FIFTH WHEEL ASSEMBLY
07V497000MACK TRUCKS, INCfrom 01/09/2006 to 06/29/2007V (Vehicle)95001/28/2008MFRMACK TRUCKS, INC10/23/200710/23/2007
Defect SummaryOn certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. an over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
Consequence SummaryThere is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
Corrective SummaryDealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. the recall began on january 28, 2008. owners may contact mack trucks at 1-800-528-6586.
NotesMack trucks recall no. sc0331.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM - WIRING
SB72400803/26/200810024981Mack - blower motor switch wiring upgrade--all with behr hvac units. manufactured prior to feb. 1, 2008. *nj06/16/2008
ENGINE AND ENGINE COOLING
SB-262-00812/01/201010037935Mack trucks: there is a new thermostat seal and cover to prevent coolant leakage. *rm06/08/2011
SB-262-00812/01/201010037935Ready06/08/2011
ENGINE AND ENGINE COOLING - ENGINE - DIESEL
SB-21405201/10/200810032350Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no.03/10/2010
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
SB-214-02411/01/201010037488Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm05/24/2011
SB-214-02411/01/201010037488Ready05/24/2011
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
FSB-214-02401/01/201110040051Ready08/15/2011
FSB-214-02401/01/201110040051Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm08/15/2011
SB-21405201/10/200810032350Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no.03/10/2010
EQUIPMENT - ELECTRICAL - AIR CONDITIONER
SB-63501201/04/200810032348Mack truck: fine particulate filter for hvac units-cxu, chu, gu, cxp and ctp models. a pleated fine particulate hvac filter (part no. 85112361) has been developed for the hvac units in certain models. no model years listed.03/10/2010
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL
SB-214-02411/01/201010037488Ready05/24/2011
SB-214-02411/01/201010037488Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm05/24/2011
POWER TRAIN - AUTOMATIC TRANSMISSION - TORQUE CONVERTER
FSB-437-00109/01/201110043094Mack truck: the easy installation of allison transmission and preventing binding of torque converter pilot during thermal expansion cycle of normal operation by using high temperature molybdenum disulfide grease. *pe02/21/2012
POWER TRAIN - AXLE ASSEMBLY
TSB-51700911/21/200810030224Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe08/27/2009
POWER TRAIN - CLUTCH ASSEMBLY
SB-31300401/23/200810032351Mack truck: revised air assist clutch cable. effective 9/17/07, a revised air assist clutch cable (part no. 27rc410m) was implemented into production on cxu, chu, and gu model chassis. no model years listed. *pe03/10/2010
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
POWER TRAIN - CLUTCH ASSEMBLY - BELL HOUSING
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE
SB-31300608/06/200910032084Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave02/12/2010
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE
SC-33401/11/200810032312Mack truck: it has been determined that the 90 degree single check valve fitting manufactured by parker hannifin corp. which is used in the supply port of the spring brake modulating relay valve (bendix sr 7 valve) may have a defect whereb03/03/2010
STEERING - HYDRAULIC POWER ASSIST - PUMP
SB-26200103/20/200910032009Mack truck: power steering pumps with metric fittings. service replacement power steering pumps supplied through the mack parts system for mp7 and mp8 engines utilize metric threads at the high pressure and suction ports. no model years02/03/2010
SUSPENSION
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009
SUSPENSION - REAR
SB-12-104310/10/200810027264Mack truck: suspension crossmembers, primaax rear suspension. models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe01/12/2009
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY
FSB-461-00102/01/201110040696Ready09/07/2011
FSB-461-00102/01/201110040696Mack trucks: rear axle housing replacement. *rm09/07/2011
UNKNOWN OR OTHER
FSB-491-02902/01/201110040704Ready09/09/2011
FSB-491-02902/01/201110040704Mack trucks: there are cracks in a steel oil tube that can lead to leaking. *rm09/09/2011