Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ELECTRICAL SYSTEM - BATTERY | ||||||||||||||||
10V536000 | MACK TRUCKS, INC | from 08/12/2009 to 08/31/2010 | V (Vehicle) | 1760 | 12/01/2010 | MFR | MACK TRUCKS, INC | 10/27/2010 | 11/02/2010 | |||||||
Defect Summary | Mack trucks is recalling certain model year 2010 through 2011 cxu, heavy trucks manufactured from august 12, 2009, through august 31, 2010. the rear hold-down brackets that secure the battery box lid may be rotated too far forward, which may restrict the battery box lid from properly seating. | |||||||||||||||
Consequence Summary | If this occurs, the battery box lid may come off when stepping on the step, which may cause a person to fall from the vehicle resulting in personal injury. | |||||||||||||||
Corrective Summary | Mack will inspect and adjust the rear hold-down brackets as required free of charge. the safety recall began on december 1, 2010. owners may contact mack trucks at 1-800-866-1177. | |||||||||||||||
Notes | Mack safety recall no. sc0346.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ELECTRICAL SYSTEM - ALTERNATOR/GENERATOR/REGULATOR | |||||
PI-0761 | 10/01/2011 | 10042145 | Mack trucks: to prevent grounding of positive terminal of an alternator on certain truck (cxu) engines, the clutch cable at the alternator (denso) has been rerouted. *pe | 11/28/2011 | |
ELECTRICAL SYSTEM - BATTERY | |||||
FSB 313-001 | 02/01/2012 | 10043766 | Mack: battery terminal corrosion. on certain cxu models equipped with the three battery box design, the battery terminals have corroded due to contaminants splashing directly onto the batteries. *js | 04/26/2012 | |
SC-0346 | 12/01/2010 | 10037826 | Ready | 06/06/2011 | |
SC-0346 | 12/01/2010 | 10037826 | Mack trucks: the battery box lid may come off when stepping on the step. *rm | 06/06/2011 | |
ELECTRICAL SYSTEM - BATTERY - CABLES | |||||
PI-371-802 | 12/01/2012 | 10051140 | Mack truck: located between clutch housing and clipping point on frame, behind battery box, is where battery cables are rubbing over slung cross members, due to improper cable routing and needs to be rerouted. models cxu. no model years | 02/21/2013 | |
FSB-370-001 | 02/01/2011 | 10040717 | Ready | 09/09/2011 | |
FSB-370-001 | 02/01/2011 | 10040717 | Mack trucks: the diagnostic connector may become loose. information on replacement of the diagnostic retainer clip. *rm | 09/09/2011 | |
ELECTRICAL SYSTEM - FUSES AND CIRCUIT BREAKERS | |||||
SP-372-010 | 05/01/2011 | 10040726 | Ready | 09/12/2011 | |
SP-372-010 | 05/01/2011 | 10040726 | Mack trucks: the fuse identification decal is being corrected. *rm | 09/12/2011 | |
ELECTRICAL SYSTEM - SOFTWARE | |||||
PI-0792 | 05/01/2012 | 10044339 | Mack: due to wrong main software, driver information display (did) is missing the icon mdrive for transmission. *pe | 06/13/2012 | |
FSB-364-032 | 11/01/2011 | 10042505 | Mack truck: trucks will be reprogram with the latest software version of vehicle electronic control unit after experiencing lost of dst2 and the chassis id. *pe | 12/13/2011 | |
SP-284-030 | 05/01/2011 | 10040725 | Ready | 09/12/2011 | |
SP-284-030 | 05/01/2011 | 10040725 | Mack trucks: there are engine ecm software updates. *rm | 09/12/2011 | |
SP-284-028 | 12/01/2010 | 10037914 | Mack truck: there is a software update. *rm | 06/07/2011 | |
SP-284-028 | 12/01/2010 | 10037914 | Ready | 06/07/2011 | |
TB-284-021 | 11/01/2010 | 10036935 | Mack: engine ecu reprogramming. the mack mp7 and mp8 with multiple engine enhancements will have new software. the egr mass flow, and aftertreatment doser and nox sensor are included in the enhancement. *pe | 04/20/2011 | |
SP-284-027 | 09/01/2010 | 10034970 | Mack truck: engine ecm and acm software updates. enhancements are available for the engine control module (ecm) and aftertreatment control module (acm). does not apply to mack trucks australia. models mru, leu, gu, chu, cxu. no model y | 02/02/2011 | |
ELECTRICAL SYSTEM - WIRING | |||||
FSB-371-043-1 | 08/01/2012 | 10045739 | Mack truck: due to vehicle electronic control unit (vecu) output wire pt02, the circuit cb7a is in wrong cavity location, causing pt02 (power take off) function not working correctly. *pe | 09/17/2012 |