Mack Mr 2007
Model Mr made in 2007 by Mack got 3 investigations there are 3 recalls as well as 8 service bulletins. Technical service bulletines regarding engine and engine cooling, power train and suspension. The car had one investigation (service brakes, air). There were some recalls concerningparking brake, service brakes, air.
Model 2007
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PARKING BRAKE | ||||||||||||||||
07V360000 | MACK TRUCKS, INC | from 11/04/2005 to 05/01/2007 | V (Vehicle) | 18805 | 01/10/2008 | MFR | MACK TRUCKS, INC | 08/15/2007 | 08/16/2007 | |||||||
Defect Summary | On certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. | |||||||||||||||
Consequence Summary | This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Mack is working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on january 10, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586. | |||||||||||||||
Notes | Mack recall no. sc0335 (sc0328).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
PARKING BRAKE - CONVENTIONAL - AIR | ||||||||||||||||
06V232000 | MACK TRUCKS, INC | from 04/05/2006 to 06/01/2006 | V (Vehicle) | 2587 | 08/14/2006 | MFR | MACK TRUCKS, INC | 06/28/2006 | 06/28/2006 | |||||||
Defect Summary | On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. if the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button. | |||||||||||||||
Consequence Summary | The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect the valves and replace it free of charge. the recall began on august 14, 2006. owners may contact mack trucks at 1-800-528-6586. | |||||||||||||||
Notes | Mack trucks recall no. sc0336 (sc0313).customers can also contact the national highway traffic safety administration | |||||||||||||||
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE | ||||||||||||||||
08V144000 | MACK TRUCKS, INC | from 08/23/2005 to 03/27/2006 | V (Vehicle) | 218 | 04/15/2008 | MFR | MACK TRUCKS, INC | 03/26/2008 | 03/27/2008 | |||||||
Defect Summary | Mack is recalling 218 my 2006-2007 mr trucks. a check valve was omitted from the secondary supply port of the sr-7 spring brake modulating valve. | |||||||||||||||
Consequence Summary | As a result, an air leak in the secondary or primary system may result in the park brakes inadvertently applying, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will add a check valve to the secondary supply port of the sr-7 spring brake modulating valve and will also repair the sr-7 valve by applying a check valve repair kit as required for the bendix safety recall (please see 07e-037). the recall began on april 15, 2008. owners may contact mack at 1-800-528-6586. | |||||||||||||||
Notes | Mack recall no. sc0337.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE | |||||
FSB-214-024 | 01/01/2011 | 10040051 | Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm | 08/15/2011 | |
FSB-214-024 | 01/01/2011 | 10040051 | Ready | 08/15/2011 | |
POWER TRAIN - AUTOMATIC TRANSMISSION - TORQUE CONVERTER | |||||
FSB-437-001 | 09/01/2011 | 10043094 | Mack truck: the easy installation of allison transmission and preventing binding of torque converter pilot during thermal expansion cycle of normal operation by using high temperature molybdenum disulfide grease. *pe | 02/21/2012 | |
SUSPENSION | |||||
FSB-711-007 | 01/01/2012 | 10043370 | Mack truck: lower right side frame bracket may experience cracking and can be directly replaced with new designed crossmember assembly. le, leu, mr, mru. no model year listed. *pe | 03/20/2012 | |
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY | |||||
FSB-461-001 | 02/01/2011 | 10040696 | Mack trucks: rear axle housing replacement. *rm | 09/07/2011 | |
FSB-461-001 | 02/01/2011 | 10040696 | Ready | 09/07/2011 | |
UNKNOWN OR OTHER | |||||
FSB-491-029 | 02/01/2011 | 10040704 | Mack trucks: there are cracks in a steel oil tube that can lead to leaking. *rm | 09/09/2011 | |
FSB-491-029 | 02/01/2011 | 10040704 | Ready | 09/09/2011 |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
SERVICE BRAKES, AIR | ||||||
EA09009 | MACK TRUCKS, INC | 06/18/2009 | 08/13/2010 | AIR BRAKE SYSTEM CONTROL VALVES | ||
Investigation has not identified a defect.complaints have abated.see closing report for further details. | ||||||
EA09009 | MACK TRUCKS, INC | 06/18/2009 | AIR BRAKE SYSTEM | |||
Odi is opening this engineering analysis to further identify and evaluate the vehicle environment and brake system factors that may be causing or contributing to extended stopping distance performance in certain vehicles. | ||||||
SERVICE BRAKES, AIR - CONTROLS | ||||||
PE09010 | MACK TRUCKS, INC | 02/13/2009 | 06/18/2009 | AIR BRAKE CONTROL VALVE | ||
Odi is closing this preliminary evaluation and opening an engineering analysis (ea09-009) to further identify and evaluate the vehicle environment and brake system factors that may be causing or contributing to extended stopping distance perfromance in certain vehicles. |