Mack Rd Series 1988

Model Rd Series made in 1988 by Mack got 8 recalls. There were some recalls concerningengine and engine cooling, fuel system, gasoline and power train.

Rd series year 1988

Recalls

Model 1988

Recalls

Campaign	Manufacturer	Manufacturing date	Type	# of units affected	Date Owner notified Mfg	Recall Initiated by	Manufacturers of recalled vehicles/products	Report Recieved Date	Record Creation Date
ENGINE AND ENGINE COOLING - ENGINE
88V161000	MACK TRUCKS, INCORPORATED	from 03/01/1988 to 03/01/1988	V (Vehicle)	408	10/07/1988	MFR	MACK TRUCKS, INC	10/18/1988	10/28/1988
Defect Summary	Certain engine support castings were produced with faulty metallurgy and could fail.
Consequence Summary	Failure of one or both brackets could cause dislocationof engine and transmission assembly, which could result in truck disablement,possible loss of accelerator control and an accident.
Corrective Summary	Replace rear engine supports as necessary.
Notes	System: engine rear supports.vehicle description: heavy duty trucks.
FUEL SYSTEM, GASOLINE - STORAGE
88V162000	MACK TRUCKS, INCORPORATED	from 02/01/1987 to 03/01/1988	V (Vehicle)	5098	10/10/1988	MFR	MACK TRUCKS, INC	10/18/1988	10/27/1988
Defect Summary	There may be insufficient weld where the step is welded to the fuel tank.
Consequence Summary	Weld cracks could eventually cause steps to disengageand possibly injure persons entering or leaving the truck.
Corrective Summary	Replace fuel tank steps with cracks; modify others to prevent step from separating from the tank.
Notes	System: fuel tank step.vehicle description: heavy duty trucks.
POWER TRAIN - DRIVELINE - CENTER SUPPORT BEARING
88V085000	MACK TRUCKS, INCORPORATED	from 11/01/1987 to 11/01/1987	V (Vehicle)	203	05/05/1988	MFR	MACK TRUCKS, INC	05/23/1988	05/26/1988
Defect Summary	Clamp plates used between the drive shaft and carrier yokes may crack and could break due to improper heat treatment.
Consequence Summary	If clamp plate breaks, yoke would fly off at detachedpoint and could injury anyone struck by flying fragments. also, the detachedinner shaft could interfere with the brake system air supply hoses and tractortires, which could result in loss of truck control and an accident.
Corrective Summary	Install new clamping plates and capscrews in all locations as needed.
Notes	System: drive shaft yoke clamp plates.vehicle description: heavy duty trucks.
STEERING - GEAR BOX (OTHER THAN RACK AND PINION)
88V102000	MACK TRUCKS, INCORPORATED	from 09/01/1987 to 05/01/1988	V (Vehicle)	140	06/22/1988	MFR	MACK TRUCKS, INC	06/27/1988	07/01/1988
Defect Summary	Compression of front springs could interfere with the 90 degree crossover fittings on the bottom of the gears.
Consequence Summary	If one of the fittings break, the hydraulic fluid islost, resulting in loss of power steering and possibly a crash.
Corrective Summary	Replace center port steering gear cylinder heads with new side port cylinder heads. also, install thicker bumper stops to eliminate spring to gear contact.
Notes	System: steering gear.vehicle description: heavy duty trucks equipped with sheppard dual steeringgears and 34.5 inch spring centers.
STEERING - HYDRAULIC POWER ASSIST - HOSE, PIPING, AND CONNECTIONS
89V032000	MACK TRUCKS, INCORPORATED	from 03/01/1987 to 09/01/1988	V (Vehicle)	3127	10/27/1989	MFR	MACK TRUCKS, INC	03/03/1989	03/16/1989
Defect Summary	An incorrect high pressure power steering hose may have been installed.
Consequence Summary	Under certain conditions, hose could fail resulting inloss of power steering assist and possibly an accident.
Corrective Summary	Replace incorrect power steering hoses.
Notes	System: power steering hose.vehicle description: heavy duty trucks equipped with stratoflex high pressurepower steering hose.
STEERING - LINKAGES
88V125000	MACK TRUCKS, INCORPORATED	from 08/01/1987 to 04/01/1988	V (Vehicle)	6400	07/20/1988	MFR	MACK TRUCKS, INC	07/27/1988	08/04/1988
Defect Summary	Some of the nuts/bolts used to fasten the steering pitman arm may loosen.
Consequence Summary	This would allow the pitman arm to come off the steeringgear sector shaft and result in immediate loss of steering control and a vehiclecrash could occur.
Corrective Summary	Retorque nuts/bolts where necessary.
Notes	System: steering pitman arm.vehicle description: heavy duty trucks.
STEERING - WHEEL AND HANDLE BAR
89V086000	MACK TRUCKS, INCORPORATED	from 08/01/1987 to 04/01/1989	V (Vehicle)	16000	08/09/1989	MFR	MACK TRUCKS, INC	05/22/1989	06/09/1989
Defect Summary	Steering wheel retaining nuts may have been improperly installed and/or torqued.
Consequence Summary
Corrective Summary	Renew and retorque steering wheel retaining nuts.
Notes	System: steering wheel retaining nuts.vehicle description: heavy duty trucks. consequence of defect: this could cause steering wheel disengagement from the steering column with loss of steering control which could result in anaccident.
SUSPENSION - REAR - SPRINGS
89V033000	MACK TRUCKS, INCORPORATED	from 09/01/1987 to 10/01/1988	V (Vehicle)	152	07/31/1989	MFR	MACK TRUCKS, INC	03/03/1989	03/21/1989
Defect Summary	Dowels may have been omitted during spring cap installation; this would put shear load on the four (4) spring cap bolts.
Consequence Summary	This could result in loosening and failure of the boltswith possible loss of control and accident potential.
Corrective Summary	Install the missing dowels to prevent movement between the spring cap and axle housing.
Notes	System: spring cap to axle housing connection dowel.vehicle description: heavy duty trucks.