Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DISC - CALIPER
02/10/1998105/28/1993
 Driver side rear brake caliper froze (seized), causing a loud thunk, then grindswhen brakes were applied. also a strong odor was noticed, like a part was severly overheating.
SERVICE BRAKES, ELECTRIC
10/01/1997205/01/1992
 Driving at aprrox 20-30mph on smooth pavement turn siganl failed ,this also connects to headlight/tail lights. all dashboard lights. all components turned off at once. in order to recover from this defect, had to reposition steering wheel.this problem is still reoccurring and is an intermittent problem which can result in an accident. defect is in steering column combination switch. *ak consumer states there have been other electrical problems, including faulty wiring to power windows. *slc
SERVICE BRAKES, HYDRAULIC
03/24/20031
 While applying the brakes the pedal went to the floor. the brakes have been replaced more than once. *nlm
SERVICE BRAKES, HYDRAULIC - ANTILOCK
03/20/1999111/13/1998
 Anti-lock brakes and steering wheel locked up resulting in loss of control, vehicle rolled onto side causing injury to consumer. mjs
 Horrible grinding noise when the vehicle was started, abs pump needed replacing.
04/01/199701/01/1993
 Abs brake failure; also replaced left rear caliper. *ak
08/02/1996
 Abs, brake failure, while driving at speed of 35mph, anti-lock system blew up,causing 75% loss of effectiveness and abs light did not come on
03/30/1995
 Upon making a sharp turn vehicle went into a skid. no response from brake and anti lock braking system. tt
02/10/19952
 Total loss of braking ability while driving at 20-30 mph twice, once resulting in an accident./injury. *ak
01/06/1994
 Abs, when making turn brakes lockup, failure of steering gear assembly causing loss control going into enbankment. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
06/17/1996
 Hydraulic brakes; when applying the brakes, vehicle accelerates. please describe. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
01/15/1998205/01/1993
 Excessive grinding noise of front brakes. replaced twice. both times rotors were reported warped. rotors and calipers replaced first time. same problem recurred 1 year later. transmission failure started with subtle rubbing sound on driver front. escalated to popping noise while drive/reverse gear engaged. surge/stall while at stop. required complete transmission replacement (non-warrantied!)
11/13/19941
 Front brakes heat up, causing brakes to squeal/grind. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
02/20/2001312/11/1992
 Rear brakes failed due to calipers locking up. second time it has happened. also, . air bag light flashes on & off.*ak the rear calipers lock up caused the brake pads to burn. air bag module failed at 100000 miles. *yh
06/27/19974
 Brake calipers continually malfunction/stick causing excessive premature failure. mjs
02/10/1998105/28/1993
 Driver side rear brake locked, causing a loud noise, then grinding when brakes are applied. there was also a strong odor of something overheating.
04/01/199701/01/1993
 Abs brake failure; also replaced left rear caliper. *ak
0
 The rear calipers do not disengage when releasing the emgerency brake, this makes the vehicle hard to drive. please describe details. *ak
07/23/19953
 Left rear caliper failed twice. *sd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
01/17/19947
 Front brake pads replaced with updated pads due to grinding noise when being applied.
02/01/19931
 Replaced front brake pads due to excessive vibration/noise.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
04/20/1995
 The rotors are warped and she has had them turned before. please describe. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
01/27/19947
 Rear brakes grinding/grab when wet.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
02/13/20031200001
 On a very snowy day after a 20 minute ride we experienced total brake failure. dealer towed car. the next day the dealer told me the repairs would cost about $2000.00 dollars. they said both brake lines burst due to severe corrosion. since this was an extreme expense. we purchased a new car. i feel no braking system should ever experience total brake failure, and feel that mazda should at least replace one of the brake lines to make sure that someone doesnt get killed. *jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
03/28/19951
 Replaced master cylinder. *ak
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
202/21/1993
 Disc handbrake failed to release, destroying pads/calipers; vehicle spun as right rear wheel locked, vehicle fire erupted. *ak
11/04/19924
 Brake pedal replaced.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - HYDRAULIC
 Abs pump failed causing a grinding noise upon vehicle start up.