Mercedes Benz Cl550 2008

Model Cl550 made in 2008 by Mercedes Benz got 1 consumer complain as well as 29 service bulletins. Consumer complaints with reference to service brakes, hydraulic. . Technical service bulletines regarding digital instrument panel and electrical system.

Model 2008

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
DIGITAL INSTRUMENT PANEL
LI-54-7004/27/201110038975Ready06/29/2011
LI-54-7004/27/201110038975Mercedes-benz: blind spot assist and distronic inoperative messages. four possible fault codes stored. there is a safety shutoff of systems due to a disruption with the sensor. *rm06/29/2011
ELECTRICAL SYSTEM - SOFTWARE
C1A-09110111/01/200910034566Mercedes benz: reprogram mbrace (n123/4) dialed numbers to hughes. this action applies to new vehicle inventory only. *pe12/06/2010
ELECTRICAL SYSTEM - WIRING
SC-201207000209/01/2012SC-2012070002A10048279Mercedes: camshaft adjustment solenoid may leak oil due to settling properties of seal and the engine wiring harness will be retrofitted with four adapter harnesses as a precautionary measure. models 2005-2011 164, 171, 203, 204, 207, 20912/17/2012
SC-201207000209/01/201210048279Mercedes: camshaft adjustment solenoid may leak oil due to settling properties of seal and the engine wiring harness will be retrofitted with four adapter harnesses as a precautionary measure. models 2005-2011 164, 171, 203, 204, 207, 20912/17/2012
ENGINE AND ENGINE COOLING - ENGINE
LI-05-20-P05/31/201110039256Ready07/13/2011
LI-05-20-P05/31/201110039256Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. there could be a problem with the camshaft and/or scoring of a piston. *rm07/13/2011
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL
TSB-200902000403/01/200910030665Mercedes: it has been determined that the tele aid may not function properly as a result of a hardware fault in the tele aid control module. if this condition exists an instrument cluster message of no service and tele aid inoperable will11/09/2009
POWER TRAIN - AUTOMATIC TRANSMISSION
60-P-04998110/03/201110044179Xentry: hard shift operations, poor start-off characteristics, and uncomfortable jolting. caused by delayed frictional connection during closing if wet start-up clutch (nak) and/or temporary jamming of control valve for wet start-up clutch05/17/2012
SCB-200809000110/01/200810027905Mercedes benz: check auxiliary transmission oil cooler thermostat for leaks, replace o rings if necessary. *pe02/18/2009
POWER TRAIN - CLUTCH ASSEMBLY
60-P-04998110/03/201110044179Xentry: hard shift operations, poor start-off characteristics, and uncomfortable jolting. caused by delayed frictional connection during closing if wet start-up clutch (nak) and/or temporary jamming of control valve for wet start-up clutch05/17/2012
SEATS
200708000108/01/200710023374Mercedes-benz - update software for dynamic/multi-contour seat control modules. *nj12/05/2007
200708000409/01/200710023373Mercedes-benz - install software for dynamic and/or multicontour seat control modules. *nj12/05/2007
SEATS - FRONT ASSEMBLY - HEAD RESTRAINT
SB-200812000301/01/200910028666Mercedes: update software for seat control module. to ensure a greater adjustment range of front seats and to prevent seat backrest from remaining in folded position, the seat control module software will be updated. model 216. my 2008.05/13/2009
SERVICE BRAKES, HYDRAULIC
LI42-4701/20/201110037918Mercedes-benz: esp malfunction or bas malfunction light shows up in the instrument panel because of a wheel speed sensor problem. *rm06/07/2011
LI42-4701/20/201110037918Ready06/07/2011
STEERING
20-P-05339803/12/201210044181Xentry: rattling/thumping noises from the area of the steering on rough roads or when driving over road undulations. no model years given. also included models 168 and 172. *js05/17/2012
STEERING - RACK AND PINION
46204612/04/2008SB-46-20-46A10020460Play in the rack and pinion steering system. models 203, 209, 210, 211, 215, 220, 230. mercedes benz. *kb updated 5/13/09. *pe10/23/2006
STEERING - WHEEL AND HANDLE BAR
PB-54-21-20106/02/200810025901Mercedes-benz: multifunction steering wheel being inoperative, this may be due to the electronics of the steering wheel being defective. *pe09/15/2008
STRUCTURE - BODY - DOOR
200807000708/01/200810027828Mercedes benz: apply preservation agent to bottom front of both front doors, if necessary. the application of preservation agent to the lower area of the front doors may be incomplete. models cl550, 600 bi-turbo, 63 amg and 65 amg.02/11/2009
SUSPENSION - FRONT - SHOCK ABSORBER
SB-32-25-8211/19/201010037408Ready05/23/2011
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SUSPENSION - FRONT - SPRINGS - AIR SUSPENSION SYSTEM
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SB-32-25-8211/19/201010037408Ready05/23/2011
SUSPENSION - REAR - SHOCK ABSORBER
SB-32-25-8211/19/201010037408Ready05/23/2011
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SUSPENSION - REAR - SPRINGS - AIR SUSPENSION SYSTEM
SB-32-25-8211/19/201010037408Ready05/23/2011
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
UNKNOWN OR OTHER
TSB-200902000403/01/200910030665Mercedes: it has been determined that the tele aid may not function properly as a result of a hardware fault in the tele aid control module. if this condition exists an instrument cluster message of no service and tele aid inoperable will11/09/2009

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC
09/15/200940001
 My 2008 mercedes benz cl550 is having a problem with brake. there is a thug-thug sound when i press down on the brake pedal. it goes away ~2 seconds after the gear is put into parking or neutral position. mercedes benz knows about the problem and they told me that there is another car, a s class, that is having a same problem. s class is 4 door version of cl class. mb told me that they are working on a new part over 3 months ago and now they are telling me that they are working on a software to fix a pressure problem in a valve. i don't understand the details but it sure sounds like an engineering issue meaning a defect. mb said the issue is limited to a very small number of vehicles but i am not sure if that is the case. noise was not readily noticeable but got louder so people might not notice it until later. i am very concerned because my brake pedal also feels much softer and weaker (need to press down further). i had this problem for ~4 months. *tr