Mercedes Benz E 2005
Model E made in 2005 by Mercedes Benz got 5 consumer complains there are 10 investigations as well as 10 service bulletins. Consumer complaints with reference to air bags. . Technical service bulletines regarding air bags, electrical system and exterior lighting. The car had some investigations: air bags, electrical system.
Model 2005
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| AIR BAGS | |||||
| SB-59783 | 12/10/2010 | 10037653 | Ready | 06/01/2011 | |
| SB-59783 | 12/10/2010 | 10037653 | Mercedes-benz: there are electrical production quality issues that cause the air bag warning light to illuminate. *rm | 06/01/2011 | |
| ELECTRICAL SYSTEM - WIRING | |||||
| SB-59783 | 12/10/2010 | 10037653 | Ready | 06/01/2011 | |
| SB-59783 | 12/10/2010 | 10037653 | Mercedes-benz: there are electrical production quality issues that cause the air bag warning light to illuminate. *rm | 06/01/2011 | |
| EXTERIOR LIGHTING - BACK UP LIGHTS | |||||
| PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
| EXTERIOR LIGHTING - HEADLIGHTS | |||||
| PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
| P-B-82.10/626 | 06/16/2008 | 10025825 | Mercedes-benz: model 211.026, 065, 070, 076, 082, 083, 265, 276, 282, 283 (e-class). vin a564853 and x161341; equipped with bi-xenon and curve illumination. curve illumination nonfunctional. *pe | 09/08/2008 | |
| SERVICE BRAKES, HYDRAULIC | |||||
| SB-090930 | 06/05/2009 | 10030964 | Mercedes: the limited warranty on the sbc hydraulic unit for models 211, model 219 and models 230 was extended from the original 4 years/50,000 miles to 10 years with no mileage limitation. the sbc hydraulic unit extended limited warranty | 12/29/2009 | |
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||||
| SB-090930 | 06/05/2009 | 10030964 | Mercedes: the limited warranty on the sbc hydraulic unit for models 211, model 219 and models 230 was extended from the original 4 years/50,000 miles to 10 years with no mileage limitation. the sbc hydraulic unit extended limited warranty | 12/29/2009 | |
| TRACTION CONTROL SYSTEM | |||||
| SB-090930 | 06/05/2009 | 10030964 | Mercedes: the limited warranty on the sbc hydraulic unit for models 211, model 219 and models 230 was extended from the original 4 years/50,000 miles to 10 years with no mileage limitation. the sbc hydraulic unit extended limited warranty | 12/29/2009 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| AIR BAGS | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
| Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
| Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
| AIR BAGS - FRONTAL | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
| Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
| Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
| ELECTRICAL SYSTEM | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
| Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
| Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
| ELECTRICAL SYSTEM - WIRING | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
| Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
| Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
| ELECTRICAL SYSTEM - WIRING - INTERIOR/UNDER DASH | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
| Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
| PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
| Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| AIR BAGS | |||
| 01/07/2013 | 64000 | 1 | |
| Srs system malfunction. *tr | |||
| 01/07/2013 | 64000 | ||
| Srs system malfunction | |||