Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| EXTERIOR LIGHTING | |||||
| 2006110003 | 11/01/2006 | 10021241 | Rework pvc seam at tail lamp. *kb | 03/26/2007 | |
| EXTERIOR LIGHTING - BACK UP LIGHTS | |||||
| PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
| EXTERIOR LIGHTING - HEADLIGHTS | |||||
| TSB-82-00-695 | 08/17/2010 | 10034654 | Mercedes: part change to banjo bolt for headlamp mount. the latch for the banjo bolt for the headlamp mount is no longer needed; therefore, the new part is now screwed onto the lamp frame using a thermoplastic nut *pe | 12/14/2010 | |
| PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
| P-B-82.10/626 | 06/16/2008 | 10025825 | Mercedes-benz: model 211.026, 065, 070, 076, 082, 083, 265, 276, 282, 283 (e-class). vin a564853 and x161341; equipped with bi-xenon and curve illumination. curve illumination nonfunctional. *pe | 09/08/2008 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| EXTERIOR LIGHTING | |||
| 02/01/2012 | 75729 | 1 | |
| I had so many problem with my mercedes e350, but when the engine light was on i couldn't believe was the balance shaft. it was in warranty so i didn't pay a cent but when they returned the car back was not the same any more, the tail light was cracked and the a/c opening are inside. the car is not any more the same, sometimes is shaking, and has so many other problems. i saw online that mercedes has to many cars with this defects that brings more problems, so i'm asking what are you waiting for a recall?????? *tr | |||
| 05/22/2011 | 54000 | ||
| The main wiring harness for the engine, lighting, fuel injection and rest of critical functions of the vehicle has disintegrated due to a manufacturing defect. the manufacturer has used an inferior and unsuitable insulation for the wires, which, is brittle, cracking and falling off exposing bare wires, creating an extremely hazardous situation. the wire insulation deterioration is causing the wires to short and prevents the vehicle from functioning correctly. this is creating a serious safety hazard. (possible, fire in engine, etc). due to the seriousness, i recommend the national highway traffic safety administration order the manufacture to properly investigate and issue a safety recall. the manufacturer is aware of this widespread defect but refuses to order a recall. i purchased this vehicle new and operated it under normal conditions. the vehicle has been regularly serviced and maintained by mercedes benz authorized dealers since it was new. the vehicle has been well kept and maintained. your assistance would be greatly appreciated! thank you! gregory chassin | |||