Mercedes Benz E63 2006
Model E63 made in 2006 by Mercedes Benz got 10 investigations as well as 28 service bulletins. Technical service bulletines regarding air bags and electrical system. The car had some investigations: air bags and electrical system.
Model 2006
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
AIR BAGS | |||||
SB-59783 | 12/10/2010 | 10037653 | Mercedes-benz: there are electrical production quality issues that cause the air bag warning light to illuminate. *rm | 06/01/2011 | |
SB-59783 | 12/10/2010 | 10037653 | Ready | 06/01/2011 | |
ELECTRICAL SYSTEM | |||||
SB-32-22-78 | 05/06/2009 | SB-32-22-78A | 10028686 | Mercedes: air matic visit workshop displayed within instrument cluster. models 164, 211, 219, 221 and 251. included 4matic, amg (compressor) amg, bluetec and wagon. model years unknown. *pe updated 9/18/09. | 05/14/2009 |
ELECTRICAL SYSTEM - WIRING | |||||
SB-59783 | 12/10/2010 | 10037653 | Mercedes-benz: there are electrical production quality issues that cause the air bag warning light to illuminate. *rm | 06/01/2011 | |
SB-59783 | 12/10/2010 | 10037653 | Ready | 06/01/2011 | |
SB-32-22-78 | 05/06/2009 | SB-32-22-78A | 10028686 | Mercedes: air matic visit workshop displayed within instrument cluster. models 164, 211, 219, 221 and 251. included 4matic, amg (compressor) amg, bluetec and wagon. model years unknown. *pe updated 9/18/09. | 05/14/2009 |
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||||
SB-2008070002 | 08/01/2008 | 10028026 | Mercedes: replace v belt upper guide pulley. the v belt upper guide pulley optimized for noise reduction is available. the dealer will replace upper guide pulley at the next workshop visit. *pe | 02/27/2009 | |
EXTERIOR LIGHTING - BACK UP LIGHTS | |||||
PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
EXTERIOR LIGHTING - HEADLIGHTS | |||||
PB-82-10/612 | 05/21/2008 | 10025826 | Mercedes benz: model 211.026, 056, 065, 070, 072, 076, 077, 082, 083, 087, 090, 256, 265, 276, 277, 282, 283, 287 equipped with option code 615 (bi-xenon). headlamp range adjustment nonfunctional with dtc codes 9010, 9011, 9012, 9013 or | 09/08/2008 | |
P-B-82.10/626 | 06/16/2008 | 10025825 | Mercedes-benz: model 211.026, 065, 070, 076, 082, 083, 265, 276, 282, 283 (e-class). vin a564853 and x161341; equipped with bi-xenon and curve illumination. curve illumination nonfunctional. *pe | 09/08/2008 | |
FUEL SYSTEM, OTHER - STORAGE - FUEL GAUGE SYSTEM | |||||
470036 | 05/01/2009 | PB-47-00-36B | 10016670 | Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. this may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in | 09/27/2005 |
POWER TRAIN - AUTOMATIC TRANSMISSION | |||||
SB-2008120008 | 12/01/2008 | 10030904 | Mercedes benz: models 203, 209, 211, 219,230, and 463; model years 2005-2007. replace pilot bushing at electrohydraulic unit. daimler ag has determined that on affected vehicles the transmission pilot bushing may leak. dealer will repla | 12/18/2009 | |
POWER TRAIN - AXLE ASSEMBLY | |||||
LI46-40-P-047549 | 08/13/2009 | 10032709 | Mercedes: cracking/creaking noises from front axle when vehicle is subject to torsion or when steering wheel is turned. this is mainly heard when the vehicle is stationary or when the vehicle is moving slowly. relative movement between th | 04/30/2010 | |
POWER TRAIN - TRANSFER CASE (4-WHEEL DRIVE) | |||||
SC-2007100004 | 02/01/2009 | 10029504 | Mercedes: replace transfer case on affected vehicles optimized transfer cases will reduce vibrations when cornering or when parking. models 203, 211, 220. *pe | 07/10/2009 | |
SEAT BELTS - FRONT - RETRACTOR | |||||
LI91-40-P-047183 | 04/29/2010 | 10034605 | Mercedes: seat belts, emergency tensioning retractors. model series 204 (with codes 299 and 800), 207, 212. seat belt can only be pulled out with great effort. at the same time a noise can be heard from the reversible reel tensioner gea | 12/10/2010 | |
STEERING - RACK AND PINION | |||||
462046 | 12/04/2008 | SB-46-20-46A | 10020460 | Play in the rack and pinion steering system. models 203, 209, 210, 211, 215, 220, 230. mercedes benz. *kb updated 5/13/09. *pe | 10/23/2006 |
SUSPENSION - FRONT - SHOCK ABSORBER | |||||
SB-32-25-82 | 11/19/2010 | 10037408 | Mercedes-benz: shock absorber procedure. *rm | 05/23/2011 | |
SB-32-25-82 | 11/19/2010 | 10037408 | Ready | 05/23/2011 | |
SUSPENSION - FRONT - SPRINGS - AIR SUSPENSION - LINES AND FITTINGS | |||||
TB-P-047927 | 09/17/2009 | 10032727 | Mercedes: following fault codes are entered in the control unit and displayed-fc5320 drain valve:open circuit or insufficient valve current in models series 211, 219; fc5260 drain valve open circuit or insufficient valve current in model 2 | 05/05/2010 | |
SUSPENSION - FRONT - SPRINGS - AIR SUSPENSION SYSTEM | |||||
LI32-22-P-051722 | 11/14/2011 | 10043810 | Mercedes: airmatic malfunction. leaking airmatic system and not a faulty compressor. *kb | 04/27/2012 | |
SB-32-25-82 | 11/19/2010 | 10037408 | Ready | 05/23/2011 | |
SB-32-25-82 | 11/19/2010 | 10037408 | Mercedes-benz: shock absorber procedure. *rm | 05/23/2011 | |
TB-P-047927 | 09/17/2009 | 10032727 | Mercedes: following fault codes are entered in the control unit and displayed-fc5320 drain valve:open circuit or insufficient valve current in models series 211, 219; fc5260 drain valve open circuit or insufficient valve current in model 2 | 05/05/2010 | |
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY | |||||
PB-35-31-05 | 07/28/2008 | 10025842 | Mercedes benz: model 171.454, 456 (2005-2008) slk class; 204.054, 056, 081 (2008) c class; 211.022, 056, 072, 087, 090 (2006-2008) e class. vehicles produced between 2/21/08 and 4/3/08 with differential serial number 1824214 to 1865328. | 09/09/2008 | |
SUSPENSION - REAR - SHOCK ABSORBER | |||||
SB-32-25-82 | 11/19/2010 | 10037408 | Mercedes-benz: shock absorber procedure. *rm | 05/23/2011 | |
SB-32-25-82 | 11/19/2010 | 10037408 | Ready | 05/23/2011 | |
SUSPENSION - REAR - SPRINGS - AIR SUSPENSION SYSTEM | |||||
SB-32-25-82 | 11/19/2010 | 10037408 | Mercedes-benz: shock absorber procedure. *rm | 05/23/2011 | |
SB-32-25-82 | 11/19/2010 | 10037408 | Ready | 05/23/2011 |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
AIR BAGS | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
AIR BAGS - FRONTAL | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
ELECTRICAL SYSTEM | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
ELECTRICAL SYSTEM - WIRING | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. | ||||||
ELECTRICAL SYSTEM - WIRING - INTERIOR/UNDER DASH | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | 11/24/2010 | Driver Air Bag Circuit High Resistance | ||
Mercedes-benz usa (mbusa) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.mbusa's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.the faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.the agency believes that further expenditure of agency resources does not appear to be warranted at this time.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.during the investigation, odi learned that mbusa will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 e-class and other mbusa model/model year vehicles.this action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.mbusa will notify all affected vehicle owners of this action.a bulletin describing this program is available in the investigative file. | ||||||
PE10017 | MERCEDES-BENZ USA, LLC. | 05/14/2010 | Driver's Frontal Air Bag Wiring Failure | |||
Odi has received four complaints of steering column module wiring harness failures on my 2005-2006 mercedes-benz e-class vehicles.in december 2005, mercedes-benz usa issued a technical service bulletin (tsb no. p-b-91.60/99) and subsequently issued several minor revisions to the original tsb.the tsbs address reports of air bag warning lamp illumination accompanied by a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag ignition squib 1 or 2 (the air bag firing circuits), respectively.this condition may result in failure of the driver's first stage and/or second stage inflator to deploy in the event of an above deployment threshold frontal crash.according to the tsbs, the repair involves significant lengthening of the steering column module wiring harness by cutting and splicing each wire in the harness.thus, it appears possible that the wire ends in the original, shorter harness could pull out of the connector block thereby causing an open-circuit condition in the driver's air bag circuits.additionally, the tsbs cover my 2003-2009 e-class and my 2006-2010 cls-class vehicles.although odi has not received complaints involving all of these vehicles, odi will inquire about all vehicles covered by the above tsbs. |