Mercedes Benz Ml63 2011

Model Ml63 made in 2011 by Mercedes Benz got 50 service bulletins. Technical service bulletines regarding electrical system, engine and engine cooling and equipment adaptive.

Model 2011

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM - IGNITION - MODULE
LI-07-0812/08/201010038227Mercedes-benz: the starter clicks but does not crank when trying to start. a voltage dip is causing the ignition procedure to fail. *rm06/13/2011
LI-07-0812/08/201010038227Ready06/13/2011
ELECTRICAL SYSTEM - IGNITION - SWITCH
LI-80-5712/08/201010038225Ready06/13/2011
LI-80-5712/08/201010038225Mercedes-benz: diagnostic procedures for the driver authorization system. *rm06/13/2011
ELECTRICAL SYSTEM - SOFTWARE
LI-80-5712/08/201010038225Ready06/13/2011
LI-80-5712/08/201010038225Mercedes-benz: diagnostic procedures for the driver authorization system. *rm06/13/2011
SB-2010110000512/01/201010038218Mercedes-benz: software update for heater lines. *rm06/10/2011
SB-2010110000512/01/201010038218Ready06/10/2011
SB-201009000710/01/201010034864Mercedes: update software for the power electronics control module. model 164.195. *pe01/21/2011
ELECTRICAL SYSTEM - STARTER ASSEMBLY
LI-07-0812/08/201010038227Ready06/13/2011
LI-07-0812/08/201010038227Mercedes-benz: the starter clicks but does not crank when trying to start. a voltage dip is causing the ignition procedure to fail. *rm06/13/2011
ENGINE AND ENGINE COOLING - ENGINE
LI-07-0812/08/201010038227Mercedes-benz: the starter clicks but does not crank when trying to start. a voltage dip is causing the ignition procedure to fail. *rm06/13/2011
LI-07-0812/08/201010038227Ready06/13/2011
EQUIPMENT ADAPTIVE
LI-68-5012/10/201010037985Mercedes-benz: the load compartment roller blind has catch bolts loose or broken from improper force when using. *rm06/08/2011
LI-68-5012/10/201010037985Ready06/08/2011
EXTERIOR LIGHTING
LI-82-10/598B10/01/200910036933Xentry (mercedes benz): replacing exterior light bulbs. exterior lights. li did not match dtb from which it was created. (main remedy for repair was missing.) *pe04/20/2011
EXTERIOR LIGHTING - TURN SIGNAL
LI-88-7003/06/201110041066Ready09/19/2011
LI-88-7003/06/201110041066Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences. *rm09/19/2011
EXTERIOR LIGHTING - TURN SIGNAL - FLASHER UNIT
LI-88-7003/06/201110041066Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences. *rm09/19/2011
LI-88-7003/06/201110041066Ready09/19/2011
POWER TRAIN - AUTOMATIC TRANSMISSION
LI-27-60-P04927004/04/201110038977Mercedes-benz: the auto-transmission switches to limp home mode or has no power. there are multiple possible fault codes. a piston may be damaged. *rm06/29/2011
LI-27-60-P04927004/04/201110038977Ready06/29/2011
SEAT BELTS - FRONT
LI-91-40-P05071810/19/201110042607Xentry(mercedes): bulletin provided regarding control unit detecting an undervoltage after buckling up (belt slack elimination) during seat belt adjustment sequence. *pe12/28/2011
SERVICE BRAKES, AIR - ANTILOCK
LI42-45-P-05120102/08/201110038045Ready06/09/2011
LI42-45-P-05120102/08/201110038045Mercedes-benz: there is the possibility of multiple brake warning messages displayed. there is a worn line causing fault codes. *rm06/09/2011
STEERING
LI46-20-P05/02/201110039258Mercedes-benz: the steering is leaking in the area of input shaft, because of wear on a seal ring. model 164/251. *rm07/13/2011
LI46-20-P05/02/201110039258Ready07/13/2011
LI46-20-P05176705/02/201110039113Ready07/08/2011
LI46-20-P05176705/02/201110039113Mercedes-benz: the steering is leaking in the input shaft, below the protective cap. there is wear on a seal ring located in the control head. *rm07/08/2011
LI-80-5712/08/201010038225Mercedes-benz: diagnostic procedures for the driver authorization system. *rm06/13/2011
LI-80-5712/08/201010038225Ready06/13/2011
STEERING - GEAR BOX (OTHER THAN RACK AND PINION)
LI46-20-P05/02/201110039258Ready07/13/2011
LI46-20-P05/02/201110039258Mercedes-benz: the steering is leaking in the area of input shaft, because of wear on a seal ring. model 164/251. *rm07/13/2011
LI46-20-P05176705/02/201110039113Mercedes-benz: the steering is leaking in the input shaft, below the protective cap. there is wear on a seal ring located in the control head. *rm07/08/2011
LI46-20-P05176705/02/201110039113Ready07/08/2011
STEERING - WHEEL AND HANDLE BAR
LI46-10P-05471510/14/201210050861Mercedes (xentry): due to amine deposits from steering wheel foam, horn plate of steering wheel, short circuited, causing the multifunction buttons, on steering wheel, to be non-functional. models 164, 251. no model years listed.02/11/2013
SUSPENSION
LI32-22-P-04792702/02/201110038024Ready06/09/2011
LI32-22-P-04792702/02/201110038024Mercedes-benz: there are defective connecting cables that are draining the airmatic compressor causing the airmatic light to come on. *rm06/09/2011
SUSPENSION - FRONT - SHOCK ABSORBER
SB-32-25-8211/19/201010037408Ready05/23/2011
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SUSPENSION - FRONT - SPRINGS - AIR SUSPENSION SYSTEM
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SB-32-25-8211/19/201010037408Ready05/23/2011
SUSPENSION - FRONT - WHEEL BEARING
LI-33-2504/07/201110038955Ready06/28/2011
LI-33-2504/07/201110038955Mercedes-benz: at the front wheel bearing there is a loud knock sound when going around a corner at slow speeds. there is an insufficient fit at the bearings. *rm06/28/2011
SUSPENSION - REAR - SHOCK ABSORBER
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SB-32-25-8211/19/201010037408Ready05/23/2011
SUSPENSION - REAR - SPRINGS - AIR SUSPENSION SYSTEM
SB-32-25-8211/19/201010037408Mercedes-benz: shock absorber procedure. *rm05/23/2011
SB-32-25-8211/19/201010037408Ready05/23/2011
WHEELS
SB-40-10-7205/19/201110039259Mercedes-benz: installation information of bolted wheel connections. all models. *rm07/13/2011
SB-40-10-7205/19/201110039259Ready07/13/2011