Mercedes Benz S55 Amg

Model S55 Amg made by Mercedes Benz got 1 investigation as well as 31 service bulletins. Technical service bulletines regarding air bags and digital instrument panel. The car had one investigation (interior lighting).

Model 2001

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
AIR BAGS
SB-91-60-19306/11/201010034306Mercedes: airbag durability and reliability. air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. with 164, 216 221, 251 and newer, the airbag control unit can be reset11/01/2010
DIGITAL INSTRUMENT PANEL
TB-82-10-66801/07/200910028665Mercedes: warning message right low beam- check bulb; or left low beam-check bulb in instrument cluster. due to the fact that the xenon burner may not be ignited on first attempt due to tolerances in ignition voltage. model years unkn05/13/2009
ELECTRICAL SYSTEM
TB-82-10-66801/07/200910028665Mercedes: warning message right low beam- check bulb; or left low beam-check bulb in instrument cluster. due to the fact that the xenon burner may not be ignited on first attempt due to tolerances in ignition voltage. model years unkn05/13/2009
32502903/31/2009PB-32-50-29A10016687Abc visit workshop displayed in instrument cluster and hydraulic fluid leakage. *tt updated 5/14/09. models 215, 220 and 230. model years unknown. *pe09/27/2005
ELECTRICAL SYSTEM - WIRING
PB-54-18-20812/15/200810028627Mercedes: display in instrument cluster air suspension or abc service required is displayed in the instrument cluster, the engine wiring harness may have been damaged by the wiper linkage. models 215.3 and 220. model years unknown.05/12/2009
ENGINE AND ENGINE COOLING
LI32-5001/20/201110037917Ready06/07/2011
LI32-5001/20/201110037917Mercedes-benze: there is a leakage at the press-fit sleeve of a pulsation damper. this is caused by high heat entering the system or tension in the line. *rm06/07/2011
ENGINE AND ENGINE COOLING - ENGINE
PB-54-18-20812/15/200810028627Mercedes: display in instrument cluster air suspension or abc service required is displayed in the instrument cluster, the engine wiring harness may have been damaged by the wiper linkage. models 215.3 and 220. model years unknown.05/12/2009
EXTERIOR LIGHTING
LI-82-10/598B10/01/200910036933Xentry (mercedes benz): replacing exterior light bulbs. exterior lights. li did not match dtb from which it was created. (main remedy for repair was missing.) *pe04/20/2011
EXTERIOR LIGHTING - TAIL LIGHTS
PB 82-10-63007/28/200810025845Mercedes benz: water in tail lamp housing on either right side or left side. *pe09/10/2008
FUEL SYSTEM, OTHER - STORAGE - FUEL GAUGE SYSTEM
47003605/01/2009PB-47-00-36B10016670Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. this may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in09/27/2005
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
PB-42-45-10703/20/200910028684Mercedes: esp service required displayed in instrument cluster. also includes 4matics, bi turbos and kompressors. models 215 and 220. model years unknown. *pe05/14/2009
SERVICE BRAKES, HYDRAULIC - ANTILOCK - WHEEL SPEED SENSOR
PB-42-45-10703/20/200910028684Mercedes: esp service required displayed in instrument cluster. also includes 4matics, bi turbos and kompressors. models 215 and 220. model years unknown. *pe05/14/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DIFFERENTIAL PROPORTIONAL VALVE
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
TSB-42-10-10906/15/200910030929Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. once the corrosion protection is damaged or removed the brake components an12/22/2009
STEERING
PB-46-20-16E02/27/200910028587Mercedes: leaks at steering gear control head connection to high or low pressure lines or leaks at internal steering lines of control head connection to steering gear housing. models 171, 203, 204, 209, 211, 215, 216, 219, 220, 221, and 205/11/2009
STEERING - GEAR BOX (OTHER THAN RACK AND PINION)
PB-46-20-16E02/27/200910028587Mercedes: leaks at steering gear control head connection to high or low pressure lines or leaks at internal steering lines of control head connection to steering gear housing. models 171, 203, 204, 209, 211, 215, 216, 219, 220, 221, and 205/11/2009
STRUCTURE
51211/02/2000616329Information on the new s55 amg / cl55 amg models schedule for wholesale release. *tt02/22/2001
SUSPENSION
PB-32-22-7703/31/200910028685Mercedes: vehicle does not lower and/or airmatic visit workshop display in instrument cluster. model 220. model years unknown. *pe05/14/2009
PB-54-18-20812/15/200810028627Mercedes: display in instrument cluster air suspension or abc service required is displayed in the instrument cluster, the engine wiring harness may have been damaged by the wiper linkage. models 215.3 and 220. model years unknown.05/12/2009
PB-32-50-35C02/22/200810028626Mercedes: the vehicle's suspension level randomly lowering while driving and/or rapid sporadic level changes shortly after stopping the vehicle, replace the body acceleration sensors. models 215.3, 220, and 230. model years unknown.05/12/2009

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
INTERIOR LIGHTING
PE05062MERCEDES-BENZ USA, LLC.11/10/200502/08/2006INSTRUMENT CLUSTER FAILURE06V028000
 The office of defects investigation (odi) opened this investigation based on seven reports indicating that the instrument clusters in model year (my) 2000-2001 mercedes-benz s class vehicles failed in that consumers were unable to read any of the gauges while operating their vehicles at any speed during the day or night.in its 573 report to nhtsa dated february 1, 2006, mercedes-benz usa, llc (mercedes-benz)states that there are three instrument cluster failure modes that would result in undesirable operation.these three failure modes are specific to certain dates of production (see below) for the subject vehicle, and mercedes-benz is recalling those vehicles within those dates.specific information regarding the failure modes is described in mercedes-benz's report (see nhtsa recall 06v028).three of the odi complaints submitted to mercedes-benz involve vehicles that were produced before the dates of production of vehicles affected by the three failure modes.based on review of those three complaints, mercedes-benz was unable to identify a relation of those three to the defects identified in the recalled vehicles.all of the mercedes-benz complaints with vins identified were within the recall population (only 2 vehicle vins were not available to positively identify vehicle build date).the recall population will include 36,911 s class and cl class mercedes-benz vehicles built in the production dates ranging from june 2000 through november 2000, january 2002 through april 2002, and may 2004 through september 2004.these dates of production cover vehicles from the 2000-2002 my and the 2004-2005 my.to correct the condition, mercedes-benz will replace all affected instrument clusters with improved ones that are not subject to the failure modes.mercedes-benz will begin owner notification during the 1st quarter of 2006.