Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| FUEL SYSTEM, GASOLINE - CARBURETOR SYSTEM | |||||
| 96225 | 10/21/1996 | 50944 | Mass air flow sensor - replacement as an assembly - service tip. *tw | 06/17/1997 | |
| FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY | |||||
| CSP 08B04 | 05/15/2008 | 10026401 | Ford/lincoln mercury: certain 1992-2001 model year crown victoria, grand marquis, and town car vehicles registered in the states of wisconsin and connecticut upgrade modifications for high speed rear impacts. *pe | 10/24/2008 | |
| 012114 | 10/29/2001 | 627791 | Parts and procedure to reduce the potential of fuel tank punctures during rare and extremely high-speed rear impacts. *tt | 02/25/2002 | |
| 14862 | 04/01/2001 | 619299 | Information on replacing fuel tank strap bolts. *tt | 05/23/2001 | |
| FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY | |||||
| CSP 08B04 | 05/15/2008 | 10026401 | Ford/lincoln mercury: certain 1992-2001 model year crown victoria, grand marquis, and town car vehicles registered in the states of wisconsin and connecticut upgrade modifications for high speed rear impacts. *pe | 10/24/2008 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| FUEL SYSTEM, GASOLINE - STORAGE | ||||||
| SQ01014 | FORD MOTOR COMPANY | 11/27/2001 | 10/03/2002 | POST REAR END COLLISION FIRES | 02I003000 | |
| Allege fuel tank can rupture following a high-energy rear collision resulting in severe fires. | ||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| FUEL SYSTEM, GASOLINE - CARBURETOR SYSTEM | |||
| 09/08/2002 | |||
| Consumer states that intake is cracked. dealer was contacted. *mr | |||
| 09/26/2002 | |||
| Intake manifold overheats. dealer notified. *mr | |||
| 08/15/2002 | 1 | 11/01/2096 | |
| The plastic intake manifold developed a fatigue crack at the coolant crossover duct. this caused coolant loss and an overheating condition. the factory replacement part is made of metal. | |||
| 01/25/2002 | 1 | 10/01/2095 | |
| While driving along a busy city street on a cold evening in january i noticed a cloud of steam behind me. it obscured my view of traffic behind me and their view of my vehicle. after pulling of the right-of-way, and examining the engine compartment, i recognized cooling system failure but was unable to identify the source of the problem. it was later determined that the plastic intake manifold had ruptured and sprayed coolant all over the engine cmpartment,and hot exhaust manifold, etclocal ford dealers were closed and unavailable. reputable auto repair garage performed the necessary repairs (6 hrs) this critical engine component should never fail. ford quietly recalled police, fleet and emergency vehicles. consumers were left to fend for themselves. they have ignored my request for financial assisstance.*ak | |||
| 05/12/2002 | |||
| While driving on highway intake maninfold broke,causing fuel and coolant to leak. engine was destroyed.dealer contacted. this was a common problem.*ak | |||
| 01/02/2001 | 1 | 01/01/1996 | |
| Intake manifold is plastic and has the potential to melt. consumer is concerned that this could eventually cause other problems to occur, such as engine over heating. *ak there are stress cracks where the alternator is attached to plastic manifold. the dealer informed consumer that the defective part should be under recall but it wasn't. at first, ford stated they would pay for the part, however they have now declined. this is a saftey hazard as smoke emits from the engine area obstructing the view of the driver. *jg | |||
| 01/31/2002 | |||
| Intake nanifold was cracked. and leaked coolant from underneath the vehicle. dealership was aware of problem.*ak | |||
| Whiile driving intake manifold burst at the seams. took vehicle to ford dealer. please provide any further information. *ak | |||
| 11/13/2001 | 04/01/2001 | ||
| The intake manifold on my vehical is the same that is on any 4.6ltr engine that ford has put into production in the years prior to 1998. when ford went to a casted manifold. i know they have had several failures of this part. even the local dealership parts man said that this part should be recalled. that tells me that they have had a high percentage of failures of this manifold. but instead the consumer has to put out around 500 dollars, to repair a defective part. is there any recourse for this type of problem. i noticed several of the same complaints in your listing of failures. *ak | |||
| 09/05/2001 | 1 | ||
| The water jacket on the intake manifold cracked right behind the alternator the dealers cary atleast 6 manifolds in stock at all times they had the problem on other vehicles and told me mine wasnt on the list. *ak | |||
| 11/03/2001 | 1 | 11/01/1996 | |
| Air intake plenum developed a crack which in turn sprayes coolant onto the rear of the alternator. i know there are many problems with this part but ford will not replace it.there is a limited recall on this part but it begins less than 4 months after the build date on my car, even though the problem described exists on many earlier models. i would like my car included in this recall but am told no way by ford. any help in this matter would be greatly appreciated. *ak | |||
| 06/26/2001 | 1 | 07/01/2000 | |
| My primary complaint is the stress crack on the intake manifold. this is a known problem by ford, and has been the subject of a recall program for their fleet vehicles only. the coverage is for 7 years from the vehicles warranty start date, with no mileage limitation. it covers the intake manifold for 4.6 l sohc engines on 1996-2001 crown victoria police vehicles, certain 1998 through 2001 crown victoria taxis and certain 1998-2001 lincoln town cars, all using the same intake manifold as that on my grand marquis (same part number, same part!). the recall program is 01m02. the stress crack caused complete coolant loss and overheating of the engine at highway speeds and the release of coolant onto the windshields of following vehicles. in addition, the reel-type electric window system in the car fails in more than normal fequency. i have had three failres in the past two years. *ak | |||
| 10/27/2000 | 08/01/1999 | ||
| These were replaced in state cars with aluminum intakes for free. we feel we should get this replaced free also with aluminum. *ak | |||
| 10/21/2000 | 06/01/1998 | ||
| Plastic intake manifold busted losing antifreeze,the sensor could not work, it only works with coolants, due to this the gauges did not work, until the the check engine light came on then i is to late. i was lucky i wasn't going 65 down the expressway when the motor locked up. i'm sure this has happen and cause accidents and no one knew what caused it. i have checked with 4 certified technicians they told me the problem happens often with this plastic intake manifolds. why would anyone have a plastic intake so close to a hot! motor. i am also told that they did recall some vechile with this motor and plastic intake but not on this car. this could have been a very dangerous things if i have been going faster, are if i was not an experience driver. | |||
| 1 | |||
| Consumer experiencing consistant problems with faulty intake manifold and gasket. nlm | |||
| 07/05/2000 | 08/01/1997 | ||
| The intake manifold on the car is made of plastic. it accrued a crack, thus dispensing the fluids outward. *ak | |||
| FUEL SYSTEM, GASOLINE - DELIVERY | |||
| 06/16/1997 | 1 | 12/01/1995 | |
| Fuel pump, bracket and spark plugs failed. | |||
| FUEL SYSTEM, GASOLINE - FUEL INJECTION SYSTEM | |||
| 12/02/2004 | 1 | 01/08/1996 | |
| The affeced engine is the 4.6l engine with the defective plastic intake manifold part number f8az-9424-bc* installed in 1996 and up all crown vics,grand marquis and town cars. *ak this is a very serious safety issue. consider a family of 6 traveling an interstate, at highway speeds, when the defective intake manifold gives out and a rapid loss of coolant occurs. the driver panics and tries to get to the right shoulder, only to be hit by an 18-wheeler. or the driver gets to the right shoulder and a highway patrolman stops to render assistance and eventually, a tow truck shows up to tow the vehicle. all these people are in harms way, because the defective intake manifold was not put on the recall list. do we have to wait for people to die or are seriously injured, before the ford motor company will finally extend their recall notice, from certain ford crown victorias to all vehicles having this defective intake manifold? the driving public needs your help in getting the ford motor company to extend their recall notice to include all ford products having this defective intake manifold. visit the following web sites, for complete details of the problem, i want to avoid. http://www.complaints.com/june2002/complaintoftheday.june6.13.htm http://www.complaints.com/november2002/complaintoftheday.november4.26.htm http://public.fotki.com/trsi/ford_intake_recall ( must visit web site) hopefully, after you visited these web sites, you will get the picture. in my opinion, the ford motor company must be made to include all | |||
| FUEL SYSTEM, GASOLINE - FUEL INJECTION SYSTEM - INJECTORS | |||
| 02/25/1996 | 5 | ||
| Fuel injector leaked gasoline. *sd | |||
| FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY | |||
| 05/25/1999 | 3 | 07/01/1996 | |
| Today was the third time that i have refueled the car and have noticed that there is a strong gas smell when i park the car in the garage. i have looked with a flash light under the car (left rear below the tire rim) and i see gas dripping out of where a tubing connects to the fuel tank. this is a rapid drip that leaves a puddle on the floor. i have been cautious to not over-fill and still the problem persists. *ak | |||
| FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY - FILLER PIPE AND CAP | |||
| 02/20/2001 | 3 | 08/14/1996 | |
| Vehicle stalls, mostly while making turns at slow speeds. dealer feels cause is overfilling of fuel filler neck. *ak dealer replaced filler pipe, however consumer states vehicle is still stalling. *slc | |||