Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC
06E022000BRAKE PARTS, INC. E (Equipment)744003/20/2006MFRFORD MOTOR COMPANY03/13/200603/13/2006
Defect SummaryCertain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. these brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. when subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.
Consequence SummaryLoss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.
Corrective SummaryAffinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. the recall began on march 20, 2006. owners can contact affina group customer service at 1-800-323-0354.
NotesThis recall only pertains to aftermarket napa, raybestos, ac delco, aimco, carquest, and bendix brake hydraulic master cylinders and has no relation to any original equipment installed on daimlerchrysler or ford vehicles.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
00V075000FORD MOTOR COMPANYfrom 04/01/1996 to 08/24/1998V (Vehicle)43620010/11/2000MFRFORD MOTOR COMPANY03/09/200003/14/2000
Defect SummaryVehicle description: passenger vehicles not equipped with the anti-lock braking system (abs). a pressure conscious reducing valve (pcrv) in the rear brakes may be subject to corrosion and result in malfunction, when operated in areas that use salt compounds on the roadway for de-icing or dust control.
Consequence SummaryIf both pcrv's malfunction, vehicle handling could be adversely affected during braking as a result of the rear wheels locking, increasing the risk of a crash.
Corrective SummaryDealers will install improved pcrv's in the rear brake system. this recall was expanded in september 2000 to include 1999 and 2000 ford contour, mercury mystique and cougar vehicles.
NotesOwner notification began april 3, 2000 for the 1996-1998 model vehicles and on october 11, 2000, for the 1999-2000 model vehicles.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
98321602/13/1998607431Some vehicles may exhibit multiple wheel speed sensor codes. *tt09/23/1999
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
00S0309/01/2000618580Safety recall pertaining to brake pressure control reducing valve replacement. *jb04/17/2001
1270705/01/19996091681Some vehicles may exhibit a front brake groan. *tt11/09/2000
620105/01/1999607020Experiencing a front brake groan during city driving. *tt11/03/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
998905/03/1999606409Some vehicles may exhibit a groaning noise from the front brakes during city driving. *tt08/19/1999
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
9622210/21/199650941Brakes - elimination of sanding rotors and drums - service tip. *tw06/17/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
98308102/26/1998607373Concerns with incorrect brake shoe / lining assembly. *tt09/21/1999
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES
01/13/201293000
 Tl* the contact owns a 1997 mercury mystique. the contact stated that he noticed a leak under the vehicle. the vehicle was taken to the dealer for diagnosis where he was informed that the pressure conscious regulating valve on the rear driver side would need to be replaced. the vehicle was repaired. the contact referenced nhtsa campaign id number: 00v075000 (service brakes, hydraulic:foundation components) and contacted the manufacturer who stated that the vehicle was not included in the recall. the failure and current mileages were 93,000.
01/13/201293000
 Tl- the contact owns a 1997 mercury mystique. the contact stated that he noticed a leak under the vehicle. the vehicle was taken to the dealer for diagnosis where he was informed that the pressure conscious regulating valve on the rear driver side would need to be replaced. the vehicle was repaired. the contact referenced nhtsa campaign id number: 00v075000 (service brakes, hydraulic:foundation components) and contacted the manufacturer who stated that the vehicle was not included in the recall. the failure and current mileages were 93,000. kmj
SERVICE BRAKES, AIR - ANTILOCK
02/09/1999301/01/1999
 Driving car and started to slow the car down to stop and abs brakes failed to stop the car or stop the car from going into a slide.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
04/01/200011/01/1998
 After the abs warning light came on, the car was taken to a dealer who after a few days of investigation said that mm needs electric hcu harness and module with an estimated cost of $1500 to repair. it seems that a wiring harness should last more that 3 years, espically on a braking system. ford offered to pick up 50% of the repair, but the premature failure of the abs system seems to be a design defect that should be ford's responsibility to repair. form completed by frank p frandina (owner's father) - day phone 716 632 7200
06/08/1998
 Consumer was traveling 20-25 mph. upon depressing the brake pedal to make a sudden stop, the pedal traveled to the floorboard, resulting in extended stopping distance, causing an accident. consumer has contacted the dealer. please provide any further details. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
105/09/1997
 Vibration when brakes applied.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
10/25/2000102/01/2000
 No summary listed for above vehicle. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
12/20/19982
 Brake pads are wearing out excessively. they're rubbing into the rotors. would make strange noises, like grinding metal, when the brakes are applied. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
08/01/20021
 While approaching stop sign, the consumer applied the brakes and the pedal went all the way to the floor. dealership is aware of problem. *ak the consumer stated that the reason that the pedal went to the floor is because the hose that carries the brake fluid to the brakes was severed by fault of the design of the manufacturer. the hose rests against the rear shocks and over time was dug into by the metal shocks and eventually cut the hose. causing complete brake failure. *scc
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
 When driving and upon making a complete stop, master cylinder went out, resulting in loss of all fluid, and causing brake pedal to travel to the floorboard, resulting in unwanted and unexpected acceleration. consumer has contacted the dealer. please provide any further details. *ak
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM - HOSES, LINES/PIPING, AND FITTINGS
08/01/2000105/12/1999
 Recall 00v075000, repairs performed, but brake problems still exist. brakes lock up and vehicle slides forward. dealer refuses to repair free of charge.*ak *slc
06/11/199703/29/1997
 Booster vacuum line broke, causing power brakes to fail. *ak