Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SERVICE BRAKES, HYDRAULIC | ||||||||||||||||
06E022000 | BRAKE PARTS, INC. | E (Equipment) | 7440 | 03/20/2006 | MFR | FORD MOTOR COMPANY | 03/13/2006 | 03/13/2006 | ||||||||
Defect Summary | Certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. these brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. when subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak. | |||||||||||||||
Consequence Summary | Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash. | |||||||||||||||
Corrective Summary | Affinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. the recall began on march 20, 2006. owners can contact affina group customer service at 1-800-323-0354. | |||||||||||||||
Notes | This recall only pertains to aftermarket napa, raybestos, ac delco, aimco, carquest, and bendix brake hydraulic master cylinders and has no relation to any original equipment installed on daimlerchrysler or ford vehicles.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | ||||||||||||||||
00V075000 | FORD MOTOR COMPANY | from 04/01/1996 to 08/24/1998 | V (Vehicle) | 436200 | 10/11/2000 | MFR | FORD MOTOR COMPANY | 03/09/2000 | 03/14/2000 | |||||||
Defect Summary | Vehicle description: passenger vehicles not equipped with the anti-lock braking system (abs). a pressure conscious reducing valve (pcrv) in the rear brakes may be subject to corrosion and result in malfunction, when operated in areas that use salt compounds on the roadway for de-icing or dust control. | |||||||||||||||
Consequence Summary | If both pcrv's malfunction, vehicle handling could be adversely affected during braking as a result of the rear wheels locking, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will install improved pcrv's in the rear brake system. this recall was expanded in september 2000 to include 1999 and 2000 ford contour, mercury mystique and cougar vehicles. | |||||||||||||||
Notes | Owner notification began april 3, 2000 for the 1996-1998 model vehicles and on october 11, 2000, for the 1999-2000 model vehicles.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR | |||||
983216 | 02/13/1998 | 607431 | Some vehicles may exhibit multiple wheel speed sensor codes. *tt | 09/23/1999 | |
SERVICE BRAKES, AIR - DISC - ROTOR | |||||
9845 | 03/02/1998 | 601264 | Availability of hub-mount brake rotor machining equipment. *yc | 07/15/1998 | |
SERVICE BRAKES, HYDRAULIC | |||||
983160 | 09/22/1999 | 607417 | Engineering is investigating some vehicles that may exhibit vibration while braking. *tt | 09/22/1999 | |
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||||
985139 | 11/01/1998 | 613275 | Some vehicles may not allow a shift from park when brake pedal is depressed or the shift lever may exhibit a click sound each time brake pedal is depressed. *tt | 06/20/2000 | |
9811330 | 02/01/1998 | 607500 | Some vehicles with anti-lock brake systems (abs) may exhibit a growling / grinding noise when backing up an incline or under hard acceleration in reverse. *tt | 09/24/1999 | |
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||||
00S03 | 09/01/2000 | 618580 | Safety recall pertaining to brake pressure control reducing valve replacement. *jb | 04/17/2001 | |
12707 | 05/01/1999 | 6091681 | Some vehicles may exhibit a front brake groan. *tt | 11/09/2000 | |
6201 | 05/01/1999 | 607020 | Experiencing a front brake groan during city driving. *tt | 11/03/2000 | |
99194 | 09/20/1999 | 6090082 | Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt | 03/06/2000 | |
9989 | 05/03/1999 | 606409 | Some vehicles may exhibit a groaning noise from the front brakes during city driving. *tt | 08/19/1999 | |
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | |||||
9814 | 01/19/1998 | 605562 | Subject regarding the availability of hub-mount brake rotor machining equipment. *tt | 07/09/1999 | |
985A5 | 03/18/1998 | 601003 | Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc | 06/17/1998 | |
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS | |||||
983081 | 02/26/1998 | 607373 | Concerns with incorrect brake shoe / lining assembly. *tt | 09/21/1999 | |
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT | |||||
02176 | 09/02/2002 | 10008580 | Lamp-brake-invadvertent disabling of brake shift interlock. *mj | 08/05/2004 |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
SERVICE BRAKES, AIR - ANTILOCK - ABS WARNING LIGHT | |||
10/30/2003 | 70903 | 1 | |
Went to ford dealer regarding 1998 mercury mystique- abs light would not go off. they tested it at $90.00 and then said that the whole hcu would have to be replaced to correct the problem at a cost of $3,000. i was also told that this part doesn't brake down or need replacement ofter. no recalls available i can't afford to fix this. they said that the regular brakes are fine, however, i notice that i somtimes don't stop like i should.*ak | |||
SERVICE BRAKES, HYDRAULIC | |||
05/16/2008 | 40000 | 1 | |
Tried to brake for a family of geese crossing the road. following the braking, i noticed a problem with the brakes and the car pulling to the left. the car was also making an unusual noise. after slowly driving the car to the repair shop, it was determined that the right front brake rotor was broken. *tr | |||
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
07/12/2004 | 2 | ||
While driving abs brake warning light continuously illuminated on the dashboard. as a result, there was extended stopping distance. vehicle was taken to the dealership, and technician determined that abs module failed, an will cost about $900.00 at consumer's expense to fix it. *ak | |||
10/01/2001 | 1 | 08/01/2098 | |
The car makes a funny noise from the engine compartment after each startup. was told that it is likely the abs going through a test. the noise is also heard when making an agressive turn while stopping, typically when the abs would engage. the noise could be best described as a loud, high pitch wine that last only a few seconds. i was told that this is common and is a major safety issue.*ak | |||
10/09/2001 | 4 | 06/01/1998 | |
Car is fire and safety hazard as well as child-welfare and safety hazard and ford motor company refuses to talk with me about this auto. no safety defec tlisted. *ak (tiresize: 205/60r15) | |||
05/22/2001 | 2 | 10/01/1999 | |
Brake pedal gets and remains hard (pedal at full top) while at highway and then at local street speeds. although this has happened twice and reported to dealer at service time (10/26/2000 & 05/22/2001), when it does happen it is constant. feels like the brakes are activated, and sometimes problem causes the car to vibrate serverly , causing concern of possible accident. dealer could not verify my concern at both instances.*ak | |||
12/15/2000 | 2 | 08/01/2000 | |
There is a short in the abs controller system which causes the fuse for the fan blower to blow therefore there is no heat and no abs which makes the car inoperable. when i took my car into the ford dealer there was another lady with the same problem. *ak | |||
05/10/2000 | 0 | ||
After taking the vehicle to the dealer for a sensor recall, the brakes made a metal-grinding noise. consumer stated noise was not there before. owner paid for brake repairs, seeks reimbursement. *ak *ml | |||
01/20/2000 | 1 | 02/01/1998 | |
In january 2000, my fan stopped running and my abs light went off simultaneously as i was rolling to a complete stop in a parking lot. my speed was very slow, as i was just stopping at the exit to the parking lot. ford covered the fan switch, as it was under my extended warranty. they researched and stated the abs module had blown, and was in no way related to what had happened with the fan. this is the third time the fan switch had been replaced. ford would not cover the abs module, and told me that the part alone was $936.00 and it would require a half a day's labor to install. the dealer charged me 79.77 for running the diagnostic tests on the vehicle to find the problem. i took the car to a local garage, and had the repair done for $450.00. i was very angry, as my warranty would not cover this part or labor, and i lease the vehicle. this part is covered in 3.4l models, but not in my car. yesterday, i was driving home and applied the brakes as i approached my home, the lights dimmed and the abs light went off. my fan was not on , therefore, it did not blow. my wipers and lights were on. i assume this is the same problem with the abs as last time. i feel that there has to be some electrical problem shorting this module out, and i do not want to pay more money to replace this if it is going to continue to occur. i went through all of the channels i could at ford motor company, to no avail, the first time. i feel that there is a defect with my car that could be electrical and just may result in other problems. i lease this vehicle and will be done with it in february, however, i do not want to have to either drive around with my abs system not functioning, or pay more money to fix a problem that would logically seem to be a defect of the car. i would appreciate any assistance you could offer me with this situation. thank you for any help you can offer. *ak | |||
Braking system malfunctioned, causing pulsation while braking and extended stopping distance which may increase the risk of a crash. there is a tsb bulletin on this problem. please provide further information. *ak | |||
Consumer contacted dealer in reference to nhtsa recalls 00v075000 and 99v103000/ manufacturer's recalls 99s14 and 00203 concerning abs brakes and headlight switch wiring. dealer refused to correct the recall problems. please provide any further details. *ak | |||
07/20/1999 | |||
When driving at any speed and applying the brakes, there is a knocking noise, and the brakes go straight to the floorboard. also, transmission is slipping, and consumer can't shift the gears. in addition, vehicle accelerates when driving or coming to a stop. *ak | |||
03/04/1999 | |||
When backing out and making a turn, vehicle is making a popping noise. vehicle has been in repair shop three times. dealer has not been able to determine the problem. also, when the brakes are applied a grinding noise is heard. consumer thinks the bracket is loose. *ak | |||
08/01/1997 | |||
While driving the vehicle the braking system malfunctioned, causing a scrubbing of metal to metal sound and extended stopping distance. been to dealer, dealer cannot determine problem. please provide further information. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
07/01/2002 | 6 | ||
Horn does not work. vehicle has been checked by dealer several times. horn would work intermittently, but currently it has failed completely.*ak the rear seat belts are inoperative. the power steering, alternator, and front brakes failed. the catalytic converter caught on fire. *jg | |||
6 | |||
Consumer is disappointed with the number (6) of recalls that have been issued on this vehicle. nlm | |||
1 | |||
Prior to recall the pressure control valve failed (00v-075). yh | |||
1 | 04/21/1999 | ||
Abs failure caused grinding and scraping noise. yh | |||
03/09/1999 | 1 | 08/24/1998 | |
Brakes failed causing consumer to hit car in front of him resulting in injuries, possibility of cruise control not disengaging. nm | |||
04/14/1999 | 1 | 04/04/1998 | |
Brakes failed resulting in vehicle hitting guard rail, no deployment of both passenger/driver's air bag during collision. mjs | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | |||
1 | |||
Premature wear of front brake rotors and pads. *ak | |||
07/01/2002 | 6 | ||
Horn does not work. vehicle has been checked by dealer several times. horn would work intermittently, but currently it has failed completely.*ak the rear seat belts are inoperative. the power steering, alternator, and front brakes failed. the catalytic converter caught on fire. *jg | |||
05/01/1999 | |||
Vehicle shakes at high speeds. when pressing brakes brakes shutter to a stop. please provide any further information.*ak | |||
05/22/2001 | 2 | 10/01/1999 | |
Brake pedal gets and remains hard (pedal at full top) while at highway and then at local street speeds. although this has happened twice and reported to dealer at service time (10/26/2000 & 05/22/2001), when it does happen it is constant. feels like the brakes are activated, and sometimes problem causes the car to vibrate serverly , causing concern of possible accident. dealer could not verify my concern at both instances.*ak | |||
09/19/1999 | 5 | 03/01/1998 | |
When driving at various speeds during rainy and wet conditions,the power steering fails during the enactment of a turn. the dealership cannot diagnosethis dangerous occurance. | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | |||
When driving at low or high speeds front end shakes. also, when applying brakes steering wheel shakes excessively, making it hard to control. dealer says it is brake rotors. dealer has seen vehicle several times, and can't fix it. *ak | |||
03/01/1998 | 11/10/1997 | ||
Warped front brake rotors, causing brakes to vibrate upon application. | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS | |||
04/22/2007 | 1 | ||
Right rear brake hose rubbed against strut causing the hose to break and loss of brake fluid on a 1998 mercury mystique gs. *tr | |||
03/01/1999 | 1 | ||
Brake fluid leakage. mjs | |||
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES | |||
04/26/2002 | 38650 | 2 | 10/01/1997 |
The clip connecting the gas pedal to the engine has fallen off twice & been repaired. both times the car was accelerating onto an interstate & the driver was able to pull off onto the shoulder. this could have resulted in fatalities if it happened while passing on a 2 lane road. i do not understand why ford just didn't glue the part together instead of using pressure to keep the clip on since obviously the clip falls off. *ts ***dimsii ivoq entry posted after 12-12-02 cut over to artemis***761509 |