Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
985A1403/18/1998601014A knocking noise proportional to wheel rotation may be heard from the front brakes during gentle braking. *tt12/07/2000
736911/01/1999610796Some vehicles may exhibit grinding noise, or greater than normal brake roughness, when applying the brakes immediately after installing motorcraft front brake pad part number br-18 (xu2z-2v001-ra). *t05/15/2000
1342110/01/1999609692Some vehicles may exhibit grinding noises, or greater than normal brake roughness when applying the brakes immediately after installing motorcraft br-18 front brake pad. *tt04/06/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
9622210/21/199650941Brakes - elimination of sanding rotors and drums - service tip. *tw06/17/1997
9423711/01/199437733Revised master cylinder and brake booster for non-abs vehicles. *tw01/06/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1903/18/1998601019The front brakes may have a persistent squeal during braking at speeds below 56 km/h (35 mph). *tt06/18/1998
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
BC291095040104/01/19953031500Unknown11/01/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
BC355097230101/23/199751506Front brake squeal/noise during light brake applications below 35 mph, replace the pads/shims kit. *jd06/27/1997
973202/03/199751658Brakes- front brake squeal below 56 km/h (35 mph)- vehicle with 14 inch wheels. *jd06/27/1997
BC101679723001/23/199751515Front brake squeal/noise during light brakie applications below 35 mph, replace the pads/shims kit. *jd06/27/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
985A1503/18/1998601015A revised master cylinder and brake booster is available for service on non-abs vehicles to further improve brake pedal feel and travel. *yc06/18/1998
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC - ANTILOCK
11/02/1996
 Brakes intermittently go all the way to the floor, usually under 20mph, dry and wet pavements, extended stopping distance occurs. dealer not aware of the problem. *ak
04/20/1998
 When vehicle was put in reverse the engine revved. consumer applied the brakes, and vehicle accelerated suddenly in reverse and collided into another vehicle. dealer has been notified. *ak
02/01/1996
 Pulling into parking lot to park at very low speed, applied brakes had extended stopping distance went over incline into ditch, impact 12:00 vehicle flipped.*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
10/11/19961
 While braking, steering wheel and brakes locked up without warning; vehicle lost control; skidded 20 to 25 ft; vehicle rearended another vehicle at standstill. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
80000406/01/1996
 When braking at low speeds (under 35 mph), caliper slides are sticking. you can hear a knocking noise and feel them grabbing through the brake pedal. the caliper slides were originally replaced by the dealership and it seemed to take care of the problem. approx. 1 year later the same thing started. the caliper slides were then greased and this seemed to take care of the problem until approx. 1 more year later. the caliper slides were sticking again, making clunking noises when you brake. i was told this is something that should not require regular maintenance. i want to know why this is still happening to the caliper slides and why there is not a recall on this if the problem cannot be corrected. *ph *jb **dimsii ivoq entry posted after 12/12/02 cut over to artemis**749080
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
11/21/1995202/01/1995
 Noisy brakes, brake pads replaced. *cj