Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING
12V008000BMW OF NORTH AMERICA, LLC V (Vehicle)88911ODIBMW OF NORTH AMERICA, LLC01/11/201201/12/2012
Defect SummaryBmw is recalling certain model year 2007-2011 mini cooper s, 2008-2011 mini cooper s clubman, 2009-2011 mini cooper s convertible, 2009-2011 mini cooper jcw, 2009-2011 mini cooper jcw clubman, 2009-2011 cooper jcw convertible, and 2011 cooper s countryman passenger cars manufactured from november 14, 2006, through january 18, 2011. the electric auxiliary water pump that cools the turbocharger has an electronic circuit board that can malfunction and overheat.
Consequence SummaryThe circuit board may smolder which could result in a vehicle fire.
Corrective SummaryBmw will notify owners, and dealers will replace the water pump free of charge. the safety recall is expected to begin during february 2012. owners may contact bmw at 1-866-275-6464.
NotesOwners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING
SIM-12-06-1210/01/201210049421Mini: engine coolant temperature sensor, now an individual component due to change in wiring harness and replacement of harness has two separate two pin connectors, where one for coolant temperature sensor and other coolant thermostat. a01/15/2013
SIM-17-07-1209/01/201210046979Mini: when a false reading leads to difficulty in starting engine and causes service engine soon lamp to illuminate, internal corrosion is forming in engine coolant temperature sensor, causing inaccurate engine temperature reading due to11/02/2012
SIM-17-06-1209/01/201210046779Mini: on engine coolant temperature sensor, internal corrosion might be forming, causing a false, inaccurate engine temperature reading, leading to difficulty in starting engine and/or a service engine soon illumination. models 2010-201210/23/2012
ENGINE AND ENGINE COOLING - COOLING SYSTEM
SIM-12-06-1210/01/201210049421Mini: engine coolant temperature sensor, now an individual component due to change in wiring harness and replacement of harness has two separate two pin connectors, where one for coolant temperature sensor and other coolant thermostat. a01/15/2013
SIM-17-01-1002/01/201110040741Ready09/12/2011
SIM-17-01-1002/01/201110040741Bmw: engine too hot message is displayed with stored trouble codes. the water pump doesnt power up. *rm09/12/2011
ENGINE AND ENGINE COOLING - ENGINE
SIM-17-06-1209/01/201210046779Mini: on engine coolant temperature sensor, internal corrosion might be forming, causing a false, inaccurate engine temperature reading, leading to difficulty in starting engine and/or a service engine soon illumination. models 2010-201210/23/2012
SIM-12-03-1101/01/201210043873Mini: service engine soon is illuminated due to tank ventilation valve (tev) being jammed open and fuel cap, with evaporative system leakage, was incorrectly installed. *pe04/30/2012
SI-M51-02-1202/01/201210043724Mini: installation of a heat shield for the bonnet intake air grill. *kb04/24/2012
SI-M-12-02-1007/01/201010034867Mini (bmw): service engine soon (mil) lamp is illuminated; the engine runs rough with any misfire faults stored in the dme-2771, 2772, 2773, 2775, 2776, 2777, 2779, 277a, 277b, 277d, 277e, 277f-combustion misfire, cylinder 1..4. *pe01/21/2011
SI-M-11-01-0903/01/200910030669Mini: when replacing the cylinder head cover on a vehicle equipped with the new n14 engine, the cover will look different in appearance. the replacement cover is now equipped with a crankcase ventilation system pressure relief valve. no11/09/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL - CRANKCASE (PCV)
SIM-11-07-0811/01/201010037305Bmw: description and specifications of crankcase ventilation system. *rm05/18/2011
SIM-11-07-0811/01/201010037305Ready05/18/2011

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
ENGINE AND ENGINE COOLING
PE11036BMW OF NORTH AMERICA, LLC10/11/201106/11/2012Engine compartment fire12V008000
 In a january 10, 2012 letter to nhtsa, bmw of north america, llc. (bmw) submitted a defect information report (dir) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (my) 2007-2011 mini cooper vehicles manufactured from november 14, 2006 through january 18, 2011 (recall 12v-008).according to bmw, the auxiliary water pump on vehicles equipped with 4-cylinder turbocharged engines may overheat.electro-migration can cause the pump electronic circuit board to overheat resulting in smoldering of the water pump. if smoldering occurs, it may lead to an engine compartment or vehicle fire.the pump supplier, pierburg pump technology gmbh, redesigned the pump to address factors that may contribute to circuit board overheating.the redesigned pumps were completely implemented in production vehicles by january 2011.recall 12v-008 was the third recall initiated by bmw to address electric auxiliary water pump fires in vehicles equipped with pierburg pumps.in two october 20, 2011 letters to nhtsa, bmw submitted dirs for similar auxiliary water pump defect conditions in approximately 32,084 my 2008-2011 bmw 5-series, 7-series, x5 and x6 models equipped with 8- and 12-cylinder engines and manufactured from may 2008 through december 2010 (recall 11v-521); and for approximately 589 my 2010 rolls-royce ghost vehicles manufactured from september 2009 through september 2010 (recall 11v-522).in three separate april 5, 2012 letters to nhtsa, bmw submitted amendments to recalls 11v-521, 11v-522 and 12v-008.the amendments all described a common defect condition related to a manufacturing process deviation in a certain production range of the redesigned pierburg water pumps that could result in cracks in the pump housing, which may allow coolant to enter and contact the pump
PE11036BMW OF NORTH AMERICA, LLC10/11/201106/11/2012Engine compartment fire12V166000
 In a january 10, 2012 letter to nhtsa, bmw of north america, llc. (bmw) submitted a defect information report (dir) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (my) 2007-2011 mini cooper vehicles manufactured from november 14, 2006 through january 18, 2011 (recall 12v-008).according to bmw, the auxiliary water pump on vehicles equipped with 4-cylinder turbocharged engines may overheat.electro-migration can cause the pump electronic circuit board to overheat resulting in smoldering of the water pump. if smoldering occurs, it may lead to an engine compartment or vehicle fire.the pump supplier, pierburg pump technology gmbh, redesigned the pump to address factors that may contribute to circuit board overheating.the redesigned pumps were completely implemented in production vehicles by january 2011.recall 12v-008 was the third recall initiated by bmw to address electric auxiliary water pump fires in vehicles equipped with pierburg pumps.in two october 20, 2011 letters to nhtsa, bmw submitted dirs for similar auxiliary water pump defect conditions in approximately 32,084 my 2008-2011 bmw 5-series, 7-series, x5 and x6 models equipped with 8- and 12-cylinder engines and manufactured from may 2008 through december 2010 (recall 11v-521); and for approximately 589 my 2010 rolls-royce ghost vehicles manufactured from september 2009 through september 2010 (recall 11v-522).in three separate april 5, 2012 letters to nhtsa, bmw submitted amendments to recalls 11v-521, 11v-522 and 12v-008.the amendments all described a common defect condition related to a manufacturing process deviation in a certain production range of the redesigned pierburg water pumps that could result in cracks in the pump housing, which may allow coolant to enter and contact the pump
PE11036BMW OF NORTH AMERICA, LLC10/11/201106/11/2012Engine compartment fire12V161000
 In a january 10, 2012 letter to nhtsa, bmw of north america, llc. (bmw) submitted a defect information report (dir) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (my) 2007-2011 mini cooper vehicles manufactured from november 14, 2006 through january 18, 2011 (recall 12v-008).according to bmw, the auxiliary water pump on vehicles equipped with 4-cylinder turbocharged engines may overheat.electro-migration can cause the pump electronic circuit board to overheat resulting in smoldering of the water pump. if smoldering occurs, it may lead to an engine compartment or vehicle fire.the pump supplier, pierburg pump technology gmbh, redesigned the pump to address factors that may contribute to circuit board overheating.the redesigned pumps were completely implemented in production vehicles by january 2011.recall 12v-008 was the third recall initiated by bmw to address electric auxiliary water pump fires in vehicles equipped with pierburg pumps.in two october 20, 2011 letters to nhtsa, bmw submitted dirs for similar auxiliary water pump defect conditions in approximately 32,084 my 2008-2011 bmw 5-series, 7-series, x5 and x6 models equipped with 8- and 12-cylinder engines and manufactured from may 2008 through december 2010 (recall 11v-521); and for approximately 589 my 2010 rolls-royce ghost vehicles manufactured from september 2009 through september 2010 (recall 11v-522).in three separate april 5, 2012 letters to nhtsa, bmw submitted amendments to recalls 11v-521, 11v-522 and 12v-008.the amendments all described a common defect condition related to a manufacturing process deviation in a certain production range of the redesigned pierburg water pumps that could result in cracks in the pump housing, which may allow coolant to enter and contact the pump