Mitsubishi Mighty Max 1992

Model Mighty Max made in 1992 by Mitsubishi got 10 consumer complains as well as 1 service bulletin. Consumer complaints with reference, among others things, to electrical system and engine and engine cooling. Technical service bulletines regarding engine and engine cooling.

Model 1992

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
TSB951500101/01/199539062Improved exhaust manifold stud. *tw03/03/1995

Consumer Complaints


Fail datemilesoccurencesPurchase date
ELECTRICAL SYSTEM
2
 The engine would shut down with no prior warning, the coil assembly was replaced (35000) and last month it failed again, after the vehicle had been at the dealer for 3 days they determined that the electrical system was not working properly. nlm
ENGINE AND ENGINE COOLING - ENGINE
08/01/2000603/01/1992
 This part has broken probably more than six times. the first couple of times, the truck was towed to a mechanic rather than the dealer, thinking that this was just a small problem. after two visits to the same mechanic, the truck was then towed to the dealer. the first time at the dealer (dobbs bros. mitsubishi-memphis), i was told that the balance shaft was out of balance. $715.78 later (this part is now under a one year/12,000 mile warranty), the shaft fork breaks again. this time, i was told that it was a part failure. 4000 miles later, it breaks again. the truck was at the service shop for more than a week while they were 'checking out what could make this piece keep breaking'. after a thorough check (incl. the manual transmission) and still warranteed, it is fixed. about 4000 miles later, it breaks again. this time, i'm told by the service manager that 'because of the multiple breaks that she could not warranty this part anymore.' i told her that the part continues to break while i'm driving. she stated you must be towing something too heavy or something. (the truck has no bumper accessory). she did offer to perform another thorough check of the vehicle (for about $1100) stating that i just can't keep fixing a part that's breaking like this i would like an investigation into this because this part is faulty and can cause serious injury when it breaks while driving. a person could lose control of the vehicle.*ak
POWER TRAIN - CLUTCH ASSEMBLY
01/16/20023
 Shaft and fork piece broke in half. this has occured 3 times, 1998,1999 and current. once with the original part and twice with the replacement parts. it is a hazard when driving in motion. you're jolted with tremendous force when it breaks without notice and sudden loss of speed. may cause car following in rear to back end vehicle and create an accident.*ak
03/10/1995
 Had clutch replaced four months ago, gone out again. tt
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE
09/01/2001205/01/1998
 Clutch disc (oem and other) fails at 16-18 months/30k miles. poor design. dangerous. *ak
09/28/1998
 Clutch would no longer shift in gear, the medal of the shaft broke in half, called a releaf fork shaft. repair shop replaced at consumer's cost, manufacturer will be contacted. *ak
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
205/01/1998
 The plastic portion of the buckle (where the lap/shoulder belt loops through) has become brittle, and cracked on all three belts in the vehicle. safety hazard. *ak
SERVICE BRAKES, HYDRAULIC - ANTILOCK
06/18/200483562112/19/1998
 While driving 30 mph, the consumer depressed the pedal and it traveled to floor. the consumer down shifted for the vehicle to come to a stop. the consumer inspected the vehicle, and noticed that the brake line had rusted, causing brake fluid to leak. *ak the abs had rusted in the area where the lines ran between the frame of the vehicle and the exhaust pipe/muffler. *sc *jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
06/18/200483562112/19/1998
 While driving 30 mph, the consumer depressed the pedal and it traveled to floor. the consumer down shifted for the vehicle to come to a stop. the consumer inspected the vehicle, and noticed that the brake line had rusted, causing brake fluid to leak. *ak the abs had rusted in the area where the lines ran between the frame of the vehicle and the exhaust pipe/muffler. *sc *jb

Car dealers selling


StateCityZipNamePhone
IAIOWA CITY52240NISSAN OF IOWA CITY