Mitsubishi Mirage 1988

Model Mirage made in 1988 by Mitsubishi got 10 consumer complains there are 3 investigations as well as 1 recall. Consumer complaints with reference, among others things, to engine and engine cooling, latches/locks/linkages and seat belts. The car had some investigations: seat belts, vehicle speed control. There was one recall concerning seat belts . The car has 2 modeles with engines 1.5l, 1.6l.

Model 1988

Engine [L]CylindersTransmissionDriveEstimate MPG (city/highway/combined)Unadjusted MPG (city/highway/combined)FuelFuel costClassRelease date
( 1.5L) 4Lockup/automatic, 3 gearsFWD29/32/3032/40/35Regular$ 500387 729
( 1.5L) 4Manual, 4 gearsFWD34/38/3638/49/42Regular$ 417387 729
( 1.5L) 4Manual, 5 gearsFWD32/37/3435/48/40Regular$ 441387 729
( 1.6L) 4Lockup/automatic, 3 gearsFWD24/26/2527/34/29Regular$ 600387 729
( 1.6L) 4Manual, 5 gearsFWD25/31/2728/40/32Regular$ 555387 729
( 1.5L) 4Lockup/automatic, 3 gearsFWD28/30/2931/38/34Regular$ 5187871130
( 1.5L) 4Manual, 5 gearsFWD30/35/3234/45/38Regular$ 4687871130

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
95V103004MITSUBISHI AMERICAfrom 01/01/1986 to 12/01/1991V (Vehicle)65800011/01/1995ODIMITSUBISHI MOTORS NORTH AMERICA, INC.05/24/199505/24/1995
Defect SummaryThe front safety belt buckle release buttons can break. these red plastic release buttons are marked press. if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Consequence SummaryThe safety belts would not provide adequate protection to an occupant in a vehicle crash.
Corrective SummaryOwners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. they should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. the latch plate should pop out of the buckle when the button is pressed. if either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. the manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
NotesSystem: interior; seat belts; belt buckles.vehicle description: passenger vehicles and light duty trucks and vans equipped with safety belts made by takata corporation.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, please contact mitsubishi at 1-800-222-0037. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
EA95004MITSUBISHI MOTORS NORTH AMERICA, INC.03/10/199508/01/1995TAKATA SEAT BELT BUCKLE FAILURE95V103004
 There is no summary currently available
VEHICLE SPEED CONTROL - LINKAGES
EA93017MITSUBISHI MOTORS NORTH AMERICA, INC.06/23/199311/30/1993ENGINE COMPARTMENT FIRES
 There is no summary currently available
PE88003MITSUBISHI MOTORS NORTH AMERICA, INC.10/13/198701/21/1988ENGINE COMPARTMENT FIRES
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
ENGINE AND ENGINE COOLING - ENGINE
107/17/1998
 The vehicle caught on fire in the engine compartment. *nlm *nlm
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
107/17/1998
 Consumer stated that engine caught on fire. *yh
07/04/1988111/01/1987
 Engine fire. *dh
LATCHES/LOCKS/LINKAGES - HOOD - LATCH
09/15/2001101/01/2000
 Hood latch is is a round protrustion that fits into hole on body of car. round protrusion is held in place by small flat sided piece of metal that slides back and forth instead of by positive clamping action. when the spring or whatever keeps the sliding piece against the protrusion is broken or weakened, the hood flies up obscuring the driver's vision. this is scary at night on a windy road.*ak
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
12/01/19941
 Both left and right rear seat belt buckles do not lock in place. *ak
12/01/1994
 Both left and right rear seatbelt buckles do not lock in place. *ak
10/05/1995
 Consumer was in an accident the driver side seat belt buckle came loose driver went forward car was totaled . tt
 Experiences intermittent failure of both rear lap belts, when seatbelt buckles become stuck in locked position. tt
SERVICE BRAKES, AIR - SUPPLY
07/04/19961
 Possible secondary air supply reed valves failure ,per recall notice, resulted in vehicle fire, notice not recieved.

Car dealers selling


StateCityZipNamePhone
MSLAUREL39440JOHN HOLLINGWORTH601-649-0792