Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - ENGINE
00V311001MITSUBISHI AMERICAfrom 01/01/1991 to 01/31/1996V (Vehicle)21000010/31/2000ODIMITSUBISHI MOTORS NORTH AMERICA, INC.10/02/200010/24/2000
Defect SummaryVehicle description: passenger vehicles: mirage model vehicles equipped with 1.5l engines; montero sport models equipped with 3.0l engines; and montero models equipped with 3.0l engines. the bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle.
Consequence SummaryThe condition can result in a loss of power steering assist, increasing the risk of a crash.
Corrective SummaryOn the mirage vehicles, the dealers will install a new, improved crankshaft pulley bolt on the older engines. on new engines which already have the improved bolt, the dealer will tighten the crankshaft pulley bolt to the correct torque specification. on the montero models, dealers will tighten the crankshaft pulley bolt to the correct torque specifications. if the bolt is damaged, it will be replaced.
NotesOwner notification will be performed in five separate owner mailings, with the first mailing beginning october 31, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mitsubishi at 1-800-222-0037. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - ENGINE
TIN01SR00301/26/2001625956Technical information regarding crankshaft pulley bolt replacement. *tt12/12/2001
6702/01/2001618238Subject regarding crankshaft pulley bolt replacement. *jb04/10/2001
ATIN01SR00201/18/2001617812This advance technical information notice states that mitsubishi motor sales of america, inc. (mmsa) is voluntarily recalling affected vehicles for a possible loose crankshaft pulley bolt. *tt03/29/2001
SR0100201/01/2001617809Mitsubishi motor sales of america, inc. is voluntarily recalling certain affected vehicles for a possible loose crankshaft pulley bolt. *tt03/29/2001
982300508/06/1998601488Diganosis and repair procedures to eliminate conditions regarding the mil illuminated and/or dtc p1715. 96-98 montero automatic transmissions models produced before 10-97 up to vin wj003864; 97-98 montero sport automatic transmissions mo08/06/1998
9709011400109/01/199754306Procedure for replacing the water passage gaskets on various vehicles. *yc03/30/1998
TSB971100202/01/199752060New valve lash adjuster noise checking and troubleshooting procedures. *jd07/17/1997

Consumer Complaints


Fail datemilesoccurencesPurchase date
ENGINE AND ENGINE COOLING - ENGINE
08/21/2007146000104/01/1997
 Tl*the contact owns a 1996 mitsubishi montero. the contact stated that the bolts of the crank shaft pulley have fallen. she heard a strange noise while driving and all of the instrument panel lights illuminated. she also stated that the steering wheel locked up. the manufacturer advised her to call an authorized dealer. the dealer stated that no recalls for these failures were available for her vehicle. the contact researched the nhtsa website and found a recall that relates to these failures. the failure and current mileages were 146,000. updated 01/02/08. *lj recall#00v311001. updated 12/12/07 , remailed complaint evoq 2/07/08. *lj
01/02/20041
 The butterfly valve in the intake plenum in the 3.5l dohc comes loose and drops into the motor which can cause it to stop suddenly, this problem is known by the manufacturer, which is apparent because they have made a replacement part to fix it; however, it is expensive and they do not help with the cost. *la
08/20/20031
 Nhtsa recall 00-v-311-001:montero models equipped with 3.0l engines. bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle. dealer won't honor this recall in puerto rico. *ak
07/08/2002206/01/1997
 While driving the engine and battery lights had come on, the consumer was unable to steer the vehicle (loss of power). the engine was still running, but vehicle would not move. contacted dealer. the crankshaft pulley bolt had broken. there is a recall, 00v311001, but this vehicle is not included due to vin. *ak consumer states that she has always had trouble with the engine light illuminating. *scc
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
07/09/1997404/11/1996
 Vehicle abruptly loses significant power. also, check engine light comes on.
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS
09/01/20041
 While driving steering failed. the crankshaft bolt that held it disengaged. recall 00v311001 was issued. *ak
06/06/20031
 Nhtsa recall 00-v-311-001 concerning mirage model vehicles equipped with 1.5l engines; montero sport models equipped with 3.0l engines; and montero models equipped with 3.0l engines. the bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle. recall repairs failed in this vehicle.*ak
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
08/23/19985
 Transmission will not shift when vehicle is cold. manufacturer said it's an emission problem. informed it's normal. takes too long to warm up before shifting. *ak
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL
3
 There were three manufacturer's recalls. it has been two years since they were issued, and manufacturer hasn't complied with them up to this date. *ak
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
03/22/2001107/26/1999
 Engine stalled at stop light. mechanic found a butterfly screw on the plenum manifold came off and fell into engine, part no md 3359040, caused $ 4000 damage. dealer had to tighten and use lock tight screws to prevent this from happening again. *slc