Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - ENGINE
00V311001MITSUBISHI AMERICAfrom 08/01/1996 to 03/31/1999V (Vehicle)21000010/31/2000ODIMITSUBISHI MOTORS NORTH AMERICA, INC.10/02/200010/24/2000
Defect SummaryVehicle description: passenger vehicles: mirage model vehicles equipped with 1.5l engines; montero sport models equipped with 3.0l engines; and montero models equipped with 3.0l engines. the bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle.
Consequence SummaryThe condition can result in a loss of power steering assist, increasing the risk of a crash.
Corrective SummaryOn the mirage vehicles, the dealers will install a new, improved crankshaft pulley bolt on the older engines. on new engines which already have the improved bolt, the dealer will tighten the crankshaft pulley bolt to the correct torque specification. on the montero models, dealers will tighten the crankshaft pulley bolt to the correct torque specifications. if the bolt is damaged, it will be replaced.
NotesOwner notification will be performed in five separate owner mailings, with the first mailing beginning october 31, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mitsubishi at 1-800-222-0037. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - COOLING SYSTEM - RADIATOR ASSEMBLY
TSB991400104/01/1999606631Information regarding radiator fan shroud breakage. *tt08/30/1999
ENGINE AND ENGINE COOLING - ENGINE
0213018R11/01/2002021301810000437Powertrain control module (pcm) reprogramming for engine stalling / engine hesitation / diagnostic trouble code (dtc) p0154. *tt02/27/2003
TSB021100206/01/2002TSB0211002635109Information on crankshaft identification marks - service manual revision. *tt10/18/2002
TIN01SR00301/26/2001625956Technical information regarding crankshaft pulley bolt replacement. *tt12/12/2001
6702/01/2001618238Subject regarding crankshaft pulley bolt replacement. *jb04/10/2001
ATIN01SR00201/18/2001617812This advance technical information notice states that mitsubishi motor sales of america, inc. (mmsa) is voluntarily recalling affected vehicles for a possible loose crankshaft pulley bolt. *tt03/29/2001
SR0100201/01/2001617809Mitsubishi motor sales of america, inc. is voluntarily recalling certain affected vehicles for a possible loose crankshaft pulley bolt. *tt03/29/2001
982300508/06/1998601488Diganosis and repair procedures to eliminate conditions regarding the mil illuminated and/or dtc p1715. 96-98 montero automatic transmissions models produced before 10-97 up to vin wj003864; 97-98 montero sport automatic transmissions mo08/06/1998
9837A00107/08/1998601215Service manual revision on changed tightening torque specifications for tie rod and relay rod nuts. *yc07/08/1998
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
TSB001100202/01/2000610459Information containing corrected cylinder head bolt tightening sequence for 2.4l, 4-cylinder engines. *tt05/01/2000
981100408/25/1998601837Conditions with mil on/misfire dtcs/engine knock. *yc08/25/1998
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
9406/01/200310003753Oxygen sensor detection. *tt10/29/2003

Consumer Complaints


Fail datemilesoccurencesPurchase date
ENGINE AND ENGINE COOLING
03/04/2010180000
 Tl-the contact owns a 1998 mitsubishi montero sport. while driving approximately 25 mph, the contact attempted to make a turn and the steering wheel seized without warning. suddenly, within thirty seconds the steering wheel unseized on its own. the failure occurred sporadicly. the vehicle was taken to an independent mechanic, who stated that a faulty crank shaft pulley contributed to the failure. the technician also informed the contact of a recall under nhtsa campaign id number 00v311001 (engine and engine cooling:engine). the vin was not included in the recall. the vehicle had not been repaired. the manufacturer was made aware of the failure. the approximate failure mileage was 180,000. sm.
03/04/2010180000
 Tl-the contact owns a 1998 mitsubishi montero sport. while driving approximately 25 mph, the contact attempted to make a turn and the steering locked without warning. suddenly within thrifty seconds the steering wheel unlocked on its own. the failure occurred sporadic. the vehicle was taken to an independent mechanic who stated the faulty crank shaft pulley contributed to the failure. the technician also advised of a recall under nhtsa campaign id number 00v311001 (engine and engine cooling:engine). the vin was not included in the recall. the vehicle had not been repaired. the manufacturer was made aware of the problem. the approximate failure mileage was 18-06,000. js
02/05/2011198500
 I was driving along i-17 near phoenix, az merging onto i-10 west - when all of the sudden i couldn't steer the vehicle. all while going 65 mph. it took every bit of my strength to maneuver the vehicle safely off the highway to avoid an accident. i had it towed to mark mitsubishi in avondale, az for repairs. after several days the repairs were done. the damage was due to the bolt - crank shaft pulley - i paid nearly $600 for repairs. four and a half weeks later, the same thing happened, this time i was driving an hour from my home on 202 in chandler when i was getting off the highway, as soon as i got on the off ramp, i heard metal hit and saw something fly across the off-ramp. again, i had my vehicle to towed to the dealership for yet another repair of the same problem. then april 8th, again it appears to be the same problem, the dealership said they can't fix it a third time. they refunded my money from the first repair. a local mechanic was able to get the bolt back in, for it to come out again today, april 26th. there was a recall on this vehicle, that did not fix the issue. now i have a truck that is not safe to drive and the dealership will not work on it. i was in two separate incidents with this vehicle at high rates of speed and was very fortunate that i was not injured and that i did not get into accident injuring anyone else. this is a manufacturer issue that mitsubishi needs to be held accountable for before someone is killed or permanently injured.
01/21/2005110/25/2004
 Recall campaign 00v311001/crankshaft pulley bolt. the dealer charged the consumer for replacing the crankshaft bolts.*ak
05/19/20041150001
 While driving 5 mph crank shaft bolt snapped. dealership was notified, but did not resolve the problem.*ak
04/18/20038400006/08/1998
 Make: mitsubishi model: montero sport xls year: 1998 suv was total loss due to out of control and rolled over. *n lm
ENGINE AND ENGINE COOLING - ENGINE
01/28/20091831141
 I bought a 1998 mitsubitshi montero sport ls approx. 9 months ago and while it ran great about a month ago i started noticing when i would go to start it up it would act like the battery was going dead. so i replaced the battery. the problem still occurred. then about 4 days after that out of no where the engine would start squealing. but that would only last for about 30 seconds. and stop until the turn would be off long enough for the engine to get cold. well i was on my way out of town to see a medical specialist for my daughter's continuing medical condition and the truck just shut down in the middle of the highway luckily we were not hit by any other motor vehicles. after getting the truck off the road i looked under the hood, seen and picked up a pulley off the ground with a long bolt still inside of it, i later learned that it was a crank shaft pulley which had caused me to throw the timing in the truck. i lost my job, missed the doctors appt for my daughter and have been without a vehicle every since that incident on january 28,2009. now i do understand that the truck is approx 11 years old but before i bought it i took it to the mitsubishi dealership and had them inspect it and hook it up to a machine. they told me that for an older truck it is in great condition. and that nothing was work that they seen off found on the computer, with the truck. *tr
03/23/2007100110104/03/2006
 I was driving my 1998 montero sport and lost power steering in the middle of a major highway. my belts broke which i had to get a wrecker to tow my vehicle get it to a mechanic and he calls back with you have major problems. the reason the belts jumped off was the crank shaft pulley came loose and screwed the harmonic balance and other things up. i could have been killed or injured and i know this was a recall on the 1998's but i bought this vehicle used so i do not know if it was taken in for the recall and now my mechanic says sometimes repairing this does not always hold so he would not warranty my 800.00 of damage. he did say this was a problem with mitsubishi vehicles in the design and i was lucky it did not screw the motor up. vehicles with this problem should not be allowed to be on the roads. *jb
01/23/2006210000102/06/2001
 Dt*: the contact stated the vehicle lost the ability to move and there was a squealing noise coming from the engine. the vehicle was towed to the dealership. the pulley was broken. there was a recall for the vehicle concerning the bolts in the crank shaft pulley. there was also a recall for the engine, nhtsa # 00v311001. the vin is included in the recall. but the manufacturer will not approve the recall performance because the regular maintenance of the vehicle was done by an independent repair shop.
07/22/2001
 00 v 311 001/crankshaft pulley: recall repairs failure from schaefer, strohminger dodge; fallston, md; phone # 410/893-6343. repairs made on february 22, 2001, and on above incident date vehicle lost power steering assist while driving due to pulley failure. dealer was notified. feel free to provide any further information on this matter. *ak
01/11/20010
 While on freeway heard a bang then car started running rough, losing power steering, and engine died. mechanic said that crankshaft/ pulley fell off , bolt had sheared in half. *ak
 Recall 00v311001- consumer received recall letter concerning crankshaft pulley. contacted dealer, dealer had no tools to correct recall problem. please give any further details. *ak
502/01/1998
 The warning concerning the bolt securing the crankshaft pulley is incorrect. the bolt on my vehicle was tightened to spec on three different occations. failure continued. there is additional problems with the alignment of the crankshaft. if safety is your true concern, this problem should be studied further. i know of 3 other vehicles in this small town that have had this problem.thi
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS
04/29/2010152000
 Tl*the contact owns a 1998 mitsubishi montero sport. while driving at 60 mph, the contact had trouble turning to the right and noticed vibrations in the steering wheel. the contact pulled over and noticed that the driving belts were dislodged and the crankshaft bolt was hanging off the vehicle. the vehicle had not been inspected or repaired at the time of the complaint. the current and failure mileages were approximately 152,000.
1880001
 While driving 70 mph harmonic balance assembly detached from the vehicle. an independent mechanic determined that the crank shaft pulley bolt broke which caused the failure. *ak