Monon Trailer 1995

Model Trailer made in 1995 by Monon got 5 consumer complains as well as 1 recall. Consumer complaints with reference, among others things, to structure and trailer hitches. There was one recall concerning steering .

Model 1995

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
STEERING - LINKAGES - KNUCKLE - SPINDLE - ARM
95V249005MONON CORPORATIONfrom 11/01/1995 to 11/01/1995V (Vehicle)300ODIHPA MONON TRAILER, INC.04/30/199605/13/1996
Defect SummaryThese axles consist of a steel tubular center section and forged steel spindles that are welded to each end of the tube. either spindle can contain a circumferential crack through a portion of its cross section.
Consequence SummaryThis crack can reduce the effective service life of the spindle and cause the spindle to fracture during normal vehicle operation increasing the potential for a vehicle accident.
Corrective SummaryEaton will use portable ultrasonic testing equipment to inspect each suspect trailer axle. trailer axles containing defective spindles will be replaced with equivalent axles.
NotesSystem: suspension; i-beam; front spindle. vehicle description: trailers and converter dollies equipped with eaton axles, models est225j, est230j, and esr230j. (see eaton campaign no. 95e039). note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact eaton at 1-616-342-3239. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Consumer Complaints


Fail datemilesoccurencesPurchase date
STRUCTURE
02/10/20101
 Missing welds in the upper coupler assembly led to fatigue cracks in the bottom plate of the assembly causing failure of the upper coupler assembly resulting in separation of the king pin from the upper coupler assembly. *tr
STRUCTURE - FRAME AND MEMBERS
03/11/19991
 Trailer bent in half in the middle, causing the frame to hit the road. (ohio traffic crash report). mjs
TRAILER HITCHES
02/10/20101
 Missing welds in the upper coupler assembly led to fatigue cracks in the bottom plate of the assembly causing failure of the upper coupler assembly resulting in separation of the king pin from the upper coupler assembly. *tr