Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - ANTILOCK - ABS WARNING LIGHT
435012A01/01/199543-50-1239072Abs warning light is on. *tw03/06/1995
43501212/01/199437955Abs wire harness for the right front wheel may rub on the brake line causing the abs warning light to come on. *tw02/09/1995

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
PE94063GENERAL MOTORS CORP.08/12/199412/21/1994CORRODED REAR DISK BRAKES
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DISC - CALIPER
04/15/1992
 Rear calipers are too small and weak to stop vehicle properly. *ak
SERVICE BRAKES, HYDRAULIC - ANTILOCK
07/11/1997707/01/1992
 Consumer has had problems with the brakes on this vehicle since day of purchase. vehicle has been serviced for brake work since 1992, and still dealer has not repaired it to consumer's satisfaction. she was told that it is brake dust that is causing her brake pedal to fail at times, and the calipers and rotors have been replaced on feburary 22, 97 and july-97. *ak *slc
 The brake pedal went to the floor when applied and a loud squeaking noise was heard. dealer repaired it at least 10 times. *ak
01/25/1997604/01/1993
 Antilock brakes failed 6 times.
12/23/1996
 When applying the abs brakes the pedal will travel to the floor, causing extended stopping distance. please give further details. *ak
12/01/19951
 Abs brake metal casing corroded. tt
11/18/19951
 Abs braking problems. tt front inside brake pads disintegrated destroying brake surface, low brake pad indicators were not in contact with surface of disc and gave no warning of low pads. *slc
 Abs braking problems. please describe. tt
06/28/19951
 Abs brakes failed on wet pavement, resulting in loss of control/accident. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
02/17/1997301/15/1994
 While driving the vehicle applied the brakes and the vehicle did not stop, resulting in loss of control/accident. *ak
07/01/1993
 Poor performance on the brakes, brakes need to be changed too often. *ak
 All (4) sets of brakes replaced due to excessive wear effecting stopping performance. please describe details. tt
 Consumer was driving try to stop and car wouldn't stop cause to rear end the car in front couldn't stop . tt
01/19/19959
 Brakes lock in open position/fail when emergency brake is not used continuously. *aw
 During panic stop experienced brake failure, pedal went to floor and continued to roll forward, no prior warning. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
10/10/1999
 Consumer took vehiicle to the dealership for a check up. calipers were binding. they replaced the sleeves on the rear brakes. because the brakes were opened, when consumer applied brakes, they wouldn't open. at 30,000 miles dealer replaced the front brake pads and resurfaced the brakes. also, rear tire came off. *ak
04/01/1996
 The rear disc brakes are corroded and caused the front brakes to wear out rapidly and have complete jobs done. please describe. *ak
11/18/19951
 Abs braking problems. tt front inside brake pads disintegrated destroying brake surface, low brake pad indicators were not in contact with surface of disc and gave no warning of low pads. *slc
06/20/19951
 Frontal collision, impact 12:00, speed 50mph, experienced loss of front brake effectiveness , pe94-063 active. *ak
06/30/19951
 Replaced front brakes. *ak
01/13/19951
 Rear disc brakes do not work/front brakes lock up on ice or slippery conditions, causing vehicle to skid. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
08/28/2000107/02/1992
 Dealer replaced consumer calipers which had no previous problem, after they were replaced both started to burn while driving causing smoke. nlm
07/11/1997707/01/1992
 Consumer has had problems with the brakes on this vehicle since day of purchase. vehicle has been serviced for brake work since 1992, and still dealer has not repaired it to consumer's satisfaction. she was told that it is brake dust that is causing her brake pedal to fail at times, and the calipers and rotors have been replaced on feburary 22, 97 and july-97. *ak *slc
1705/01/1995
 Rear brake calipers replaced due to corrosion; also replaced front brake pads/rotors/ valve cover gasket/water pump/torque converter/alternator. *ak
12/02/1996
 Rear brake calipers replaced twice due to corrosion; also replaced front brake pads/rotors/
 Rear calipers lock w/excessive wear of pads. other brake components were also replaced with condition the same. please describe details. tt
03/08/19952
 Rear brake calipers do not activate, resulting in ineffective brake action, front brakes only work, in panic stop allowed to roll forward through intersection.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
1705/01/1995
 Rear brake calipers replaced due to corrosion; also replaced front brake pads/rotors/ valve cover gasket/water pump/torque converter/alternator. *ak
 Replaced the front brake pads five times, please describe. *ak
09/05/19955
 Semi-metallic brake pads develop heat, warping rotors. (2nd vehicle on 483707) *aw
06/08/19954
 Brake pads are wearing excessively quick. tt
02/01/1995
 Brake failure, front disc pads and rotors replaced, every 7000 miles , pe94-063 active. tt
03/01/19951
 Front brakes need pads. tt
02/03/19953
 Braking system failure, front brake pads are wearing excessively. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
07/11/1997707/01/1992
 Consumer has had problems with the brakes on this vehicle since day of purchase. vehicle has been serviced for brake work since 1992, and still dealer has not repaired it to consumer's satisfaction. she was told that it is brake dust that is causing her brake pedal to fail at times, and the calipers and rotors have been replaced on feburary 22, 97 and july-97. *ak *slc
6
 Vehicle's rear brake sliders are rusted/corroded and are either locking up or not working at all. this causes excessive stopping distance and front rotor warpage.o wner had 6 brakes replaced. *ak
1705/01/1995
 Rear brake calipers replaced due to corrosion; also replaced front brake pads/rotors/ valve cover gasket/water pump/torque converter/alternator. *ak
01/01/1995
 Rear brake rotors and calipers wear excessively, possible due to overheating. *ak
11/28/19951
 Brake system failure, disc rotors are defective and failed at 13k miles. tt consumer also owns a chevrolet truck 1990 that experienced same problem. *slc
06/01/19951
 Rotor failed, causing rear brake noise. *ak
02/01/1995
 Brake failure, front disc pads and rotors replaced, every 7000 miles , pe94-063 active. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
 Rear brakes locked up, causing vehicle to catch on fire . please provide further information. *ak
6
 Vehicle's rear brake sliders are rusted/corroded and are either locking up or not working at all. this causes excessive stopping distance and front rotor warpage.o wner had 6 brakes replaced. *ak
06/30/19951
 Rear brake failure. *ak
03/01/19951
 The rear brake leaked. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
04/10/1995
 Brakes are defective an rear wheels grab intermittently. dealers changed the rear drums and there is still a problem. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
08/14/19987
 When applying brakes, the left rear wheel cylinder overheats, causing wheel to smoke. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
01/20/1996
 The steel brake line ruptured when the abs cable rubbed through it and caused loss of brakes. please describe. tt