Oldsmobile Regency 1998

Model Regency made in 1998 by Oldsmobile got 26 consumer complains as well as 9 service bulletins. Consumer complaints with reference, among others things, to air bags and electrical system. Technical service bulletines regarding electrical system and engine and engine cooling.

Model 1998

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM - BATTERY
73815301/01/1998600210Some owners may comment that the battery is low or dead. *yc04/29/1998
ELECTRICAL SYSTEM - IGNITION
9800302/01/1998600193Information on spark plug tip erosion calibration pcm reflash. *yc04/29/1998
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
9887651404/01/1998601121Condition regarding the engine intermittently stalls during a closed throttle deceleration from about 35 mph. *yc07/01/1998
97120177653004/29/1998600214Comments that the engine runs rough, has lack of power, has a knock noise, and/or the mil (malfunction indicator light) is illuminated. *yc04/29/1998
POWER TRAIN - DRIVELINE - UNIVERSAL JOINT
97080177715508/01/199754285Experiencing a transaxle gear whine noise on coast down or light acceleration. *yc03/30/1998
POWER TRAIN - MANUAL TRANSMISSION
97080177715F08/01/199754421Experience a transaxle gear whine noise on coast down or light acceleration. *yc04/07/1998
STRUCTURE - BODY
83170410/01/1998602983Concerns of door handles on white painted vehicles truning yellow. *yc01/25/1999
SUSPENSION
9883300510/01/1998602751Some customers may comment that the vehicle01/11/1999
UNKNOWN OR OTHER
9883831305/01/1998601394Some customers may comment that the cupholder does not stay latched. *yc08/03/1998

Consumer Complaints


Fail datemilesoccurencesPurchase date
AIR BAGS
10/20/2002
 Consumer states that when driving and without warning the air bag inadvertently deploy causing the consumer to pull over. dealer notified. ph *dt
AIR BAGS - FRONTAL
 Consumer states of having problems with the air bag on the drivers side. dealer was contacted. mr
1
 While backing out of a parking space the driver's air bag deployed without collision occurring. cause unknown. *ak.et.
ELECTRICAL SYSTEM - STARTER ASSEMBLY - SOLENOID
780001
 Vehicle does not down shift properly. took vehicle to mechanic, and they were going to replace the pressure control solenoid. *ak
ENGINE AND ENGINE COOLING - COOLING SYSTEM
03/13/200688950107/02/2005
 My 1998 oldsmobile regency was losing coolant. i could not see a visible leak. the check engine indicator light came on, so i took the vehicle to be serviced. the mechanic found the upper intake (plenum) to be leaking the coolant into the engine (cylinder #3.) the leak was caused due to the fact that the intake plenum is made of plastic. i intend to send oldsmobile a copy of my bill which was $533.32. why would a company make a part such as this out of plastic? by the way, my indicator light is still on, so i will need to have a dealer check it out, as the original mechanic can find no reason for it remaining lit. *nm
08/10/200462000105/06/2000
 I own a 1998 olds regency with 62000 miles on it. this car has the standard 3.8 liter v-6 which has been in production for probably 30 years. i noticed recently the coolant reservoir level was slightly down and added coolant to bring it up to level. two weeks later my engine temperature was slightly high so i checked the reservoir level again. the reservoir was dry and i couldn't see any coolant in the radiator. i called the local dealership, added distilled water and got it there. when i arrived there was coolant leaking out of the intake manifold. the dealer informed me the next day they had to replace the upper and lower intake manifolds and gaskets at a cost of $1050. i questioned myself and the service manager how an intake manifold could go bad. he informed that the upper manifold was made of plastic. i talked to the mechanic after the fix. he informed me that the egr nipple that flow exhaust gases into the plastic upper manifold had thermally broke down the plastic and caused the leak. gm's fix was to decrease the size of the nipple in the lower manifold so there was an air gap between the nipple and the plastic upper manifold. this fix would stop heat from being transferred directly to the plastic upper manifold. gm has an engineering problem and they have addressed it by changing the replacement manifolds. no recall has been issued so the total cost is the burden of the owner. i have maintained my car properly and i believe this problem is not my fault. the problem is gm doesn't think it's their fault either.*ak
ENGINE AND ENGINE COOLING - ENGINE
03/16/200685000107/02/2005
 Bought my 1998 oldsmobile regency in july of 2005 with 78000 miles on it. march of 2006 the check engine light would come on and go off. the coolant was bone dry upon inspection by self. there were no visible leaks. i took it to my mechanic who had to replace the plenum at a cost of $533.00. the plenum had cracked and coolant ran into the #3 cylinder. i then had to have the fuel injectors cleaned at the dealer who charged me $170.00 for that job. now i have a problem with the anti-theft lock system. my security light keeps coming and going and my car won't recognize my key. when this happens about (every 3rd start lately) the fuel system and the starter shut down for 3 minutes. it doesn't always start after i wait 3 or 4 minutes either, so i have to sit and wait another 3-4 minutes and so on. (once i had waited 2 hours before it would start.) i had a locksmith look at it who said he could fix it (ultimately he couldn't) but ended up paying $135.00 for that service and then fighting him with the attorney general's help and got a refund. i still have the problem. this has been going on for almost a year. i took it to a dealer and they said it is probably the computer and charged me $80.00 to tell me that. he said he could try to fix that problem for about $450.00. i don't want to deal with this anymore and wish someone could help me. *nm
08/05/2004901951
 Intake manifold, made of plastic, ruptured dumping coolant into cylinders. resulted in instantaneous stoppage of engine and loss of power steering. could easily have led to wreck. *ak mechanic at first gm dealer contacted diagnosed problem sight unseen as it is a known common problem. gm strongly suggested having work done at a dealership so they could make adjustments to the repair bill. after having the vehicle towed to a dealer, no adjustments were made, towing bill was exhorbitant, and repair bill was 30% higher than quoted by independent repair shop. defective part is available for inspection (in my possession).
02/04/20021
 Consumer was getting a clunk at times when braking and also when starting the vehicle. dealer said it sounded like an engine mount, which is a loose cradle bolt. *yd
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
11/01/20041
 Coolant leaked out the intake manifold. had to replaced intake manifold and gaskets. *bf e-mailed consumer response exhaust gases had gotten into the plastic upper manifold had thermally broke down the plastic and caused the leak. *sc
FUEL SYSTEM, GASOLINE - CARBURETOR SYSTEM
07/19/2002
 While traveling about 70mph on the highway without prior warning, there was white smoke coming from the back of the tail pipe due to the plastic intake manifold melting. please provide additional information dealer is aware of the problem. ph
06/27/2002103/26/1998
 Intake manifold had to be replaced due to cracking and leaking. contacted dealer. *ak
OTHER
01/01/1992
 Consumer is too short and can't reach pedals.
POWER TRAIN - AUTOMATIC TRANSMISSION
04/01/20031
 The vehicle had to be towed, due to a failed transmission. *jb
01/01/20021
 Consumer stated the shifter shaft would slide to 2nd gear and not click to 1st,the dealer found a loose nut and tightened it on the shifter shaft and adjusted the cable. consumer feels this is a factory defect. *yd *cb the dealer also fixed a loose cradle bolt because the consumer heard a clunk noise after braking or when starting the vehicle. *jb
04/29/19986
 Intermittently when the vehicle is put into reverse it spins like it's in neutral. the dealer states that when the vehicle is in reverse, it goes passed the detent, causing the vehicle to spin. the manufacturer has been notified. *ak
SEAT BELTS - FRONT - ANCHORAGE
09/01/1998111/01/1997
 Rear seat belt failed. *yc
SEATS
03/02/20011
 Consumers mother-in-law was involved in an accident, the vehicle she was driving was rear ended and the seat broke, causing injuries. *yh (daughter for mother-in-law)
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
2
 Consumer states vehicle is shimmying when brakes are applied, dealer has completed a brake job, turned front brake rotors, replaced front brake rotors, problem still continues. *slc
STEERING - HYDRAULIC POWER ASSIST - PUMP
12/28/19993
 Vehicle had an ongoing problem with loss of power steering. power steering pumps have been replaced three times from 1,000 miles up to present. problem is reoccurring, feel free to provide any further information.*ak
STRUCTURE
01/01/20021
 Consumer stated the shifter shaft would slide to 2nd gear and not click to 1st,the dealer found a loose nut and tightened it on the shifter shaft and adjusted the cable. consumer feels this is a factory defect. *yd *cb the dealer also fixed a loose cradle bolt because the consumer heard a clunk noise after braking or when starting the vehicle. *jb
TIRES
2
 Consumer stated that the steering system would shimmy, dealer replaced the tires at 6000 miles, no specific tire information given. *slc
104/01/1998
 Tire blew out on highway. yh
TIRES - TREAD/BELT
10/02/2000409/07/1998
 Left front tire belts separated and the other three were capped causing excessive noise while driving (original goodyear invicta tires). nlm
VISIBILITY - WINDSHIELD WIPER/WASHER
09/01/2003226471
 Over the past four months, the windshield wipers has not worked properly. *ph the dealership was unable to fixe the problem. *tt *jb

Car dealers selling


StateCityZipNamePhone
INMCCORDSVILLE46055STANLEY317-335-3000
MEWESTBROOK04092BILL DODGE
MICHELSEAFAIST-DEISING
MNGRAND MARAIS55604GRAND MARAIS MOTORS218-387-1060
MNSAINT CLOUD56301CAR SMART320-230-9898