Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
STRUCTURE - BODY
02086700606/01/2002634513Some customers may comment that there is rust forming around the front or rear portion of the roof. *tt10/03/2002
STRUCTURE - BODY - DOOR
99016A05/01/199999016606534Revised customer satisfaction campaign regarding power sliding door operation. *tt08/26/1999

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
STRUCTURE - BODY - DOOR
PE04064GENERAL MOTORS CORP.09/17/200412/22/2004POWER-SLIDING DOOR04V597000
 Subject vehicles are available with an optional power sliding door.the interior handle is oriented in the vertical position in the door panel and lines up at the elbow level when the occupant is seated in the 2nd-row outboard position.if the occupant holds the interior handle in the thumb up position during power-assisted opening, the arm/wrist can be push back with force against the 2nd-row bucket seat or captain's chair seat back creating a risk of injury (other seating configurations have ample seat to door clearance to avoid entrapment of the lower arm).among the 103 total reports, there were 102 alleged injuries including arm/wrist, thumb and shoulder injuries.a count of injuries reveals that 76 injuries were a fractured or a broken arm/wrist requiring an immobilizing cast for four-to-six weeks.all injuries involve the right side power sliding door.the left side power sliding door is on far fewer vehicles, but more importantly, it produces less force.gm notified the agency by letter dated december 21, 2004, that it will recall model year 1997 though early 2005 gm u-van vehicles equipped with a right side power sliding door and with 2nd-row bucket seats or captain chairs (nhtsa recall #04v597).as part of the recall remedy, gm will replace the door handle with a flush mounted handle that will prevent an occupant from grasping the handle with the palm between the handle and door panel (thumb up orientation) and thus eliminate the potential for arm/wrist entrapment.this investigation is closed.

Consumer Complaints


Fail datemilesoccurencesPurchase date
STRUCTURE - BODY
03/01/20041
 Paint on hood of van is peeling and coming off right down to the metal. i've seen the very same issue on many other vans like mine the same year, make and model. this is a factory paint problem and pontiac should fix this. *tr
07/15/2000203/01/1998
 This is the second time i have had this overhead console fixed in two years.
STRUCTURE - BODY - DOOR
03/07/20081
 I have a 98 pontiac transport. the passenger side slide door opens on its own, and it will only open manually. the sliding door stopped opening with the control about three months ago. *tr
02/26/2002
 Sliding door will not unlock manually or electronically. the dealer is inspecting. please add more information. the door started acting up after nhtsa recall 01v067000/ manufacturer's recall 01013 repairs were performed. *ak
07/02/1998603/27/1998
 Water leaked inside power door handle causing contact to corrode and short connection on backside of door. yh