Suzuki Suzuki Motorcycle 1990-2003
Model Suzuki Motorcycle made by Suzuki got 7 consumer complains as well as 12 service bulletins. Consumer complaints with reference, among others things, to engine and engine cooling and equipment. Technical service bulletines regarding electrical system and engine and engine cooling.
Car model
| Name | Bulletins | Investigations | Consumer Complaints |
|---|---|---|---|
| Suzuki Suzuki Motorcycle 1990 | 0 | 0 | 1 |
| Suzuki Suzuki Motorcycle 1993 | 0 | 0 | 1 |
| Suzuki Suzuki Motorcycle 1995 | 1 | 0 | 8 |
| Suzuki Suzuki Motorcycle 1996 | 0 | 0 | 7 |
| Suzuki Suzuki Motorcycle 1997 | 0 | 1 | 9 |
| Suzuki Suzuki Motorcycle 1998 | 1 | 0 | 5 |
| Suzuki Suzuki Motorcycle 1999 | 1 | 0 | 9 |
| Suzuki Suzuki Motorcycle 2000 | 0 | 0 | 18 |
| Suzuki Suzuki Motorcycle 2001 | 0 | 0 | 6 |
| Suzuki Suzuki Motorcycle 2002 | 0 | 0 | 26 |
| Suzuki Suzuki Motorcycle 2003 | 1 | 0 | 28 |
Model 9999
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM - BATTERY | |||||
| 0402 | 05/01/2003 | 10001697 | Change of battery location in shipping crate - additional assembly and pre-delivery information. lt-z250k4. *tt | 06/19/2003 | |
| ELECTRICAL SYSTEM - WIRING | |||||
| SG-995050112903E | 06/01/2009 | 10028828 | Suzuki: assembly and pre delivery service for wiring harness motocycle -model an650k9. model years unknown. *pe | 06/01/2009 | |
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| 54 | 04/01/2003 | 10001695 | Valve clearance specification - service manual correction. model lt-a400/400fk2 and lt-f400/400fk2 eiger. *tt | 06/19/2003 | |
| EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
| SB-09-33 | 11/05/2008 | 10029027 | Suzuki mc: an assembly and pre delivery service guide will not be issued for the gsf1250sk9 because the set up procedure remains similar to the gsf1250sak7. model years unknown. *pe | 06/12/2009 | |
| SB-09-35 | 12/11/2008 | 10028875 | Suzuki motorcycle: an assembly and predelivery service guide will not be issue for the an650ak9, because the set up procedure remains similar to the an650k9. model years unknown. *pe | 06/05/2009 | |
| 08-47 | 06/10/2008 | 10025869 | Suzuki: sv650ak8 assembly and pre-delivery procedures. assembly guide will not be issue for the sv650ak8, because the set up procedure remains similar to the sv650k3. unknown model and model year. *pe | 09/11/2008 | |
| 83 | 05/01/2003 | 10001694 | Coolant pump shaft oil seal and axle spacer installation direction. additional owner's service manual information. model rm250k3. *tt | 06/19/2003 | |
| POWER TRAIN | |||||
| 25 | 08/07/2003 | 10003111 | Service manual correction - drive chain type. sv1000k3 & sv1000sk3 model. *tt | 10/08/2003 | |
| POWER TRAIN - CLUTCH ASSEMBLY | |||||
| 82 | 05/01/2003 | 10001693 | Clutch plate replacement procedure. model rm125k2. *tt | 06/19/2003 | |
| SUSPENSION - FRONT | |||||
| 131 | 04/01/2003 | 10001696 | Front fork outer tube height specification. model gsx-r1000k3. service manual correction. *tt | 06/19/2003 | |
| UNKNOWN OR OTHER | |||||
| 3 | 02/23/1999 | 604503 | Subject pertaining to revised model identification guide. *tt | 05/04/1999 | |
| 13 | 06/03/1998 | 601455 | Service obligations for assembly & pre-delivery. *yc | 08/05/1998 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE | |||
| 3 | 02/23/2002 | ||
| There is a problem with oil leaking from the cylinder base gasket. *mr the oil leak problem was repaired under warranty and started to leak again in the same location. (at the cylinder base gasket) there were problems with the starter clutch. the gasket had to be replaced twice to stop the leak due to a gasket design that had been improved. the dealer stated that the leak should stop and never return. (model-dr650se) *scc *jb | |||
| 1 | 03/01/2001 | ||
| (suzuki motorcycle suzuki motorcycle 2001) engine emits smoke and consumes oil. *ts *jb ****dimsii ivoq entry posted after 12-12-02 cut over to artemis****761442 | |||
| EQUIPMENT | |||
| 1 | |||
| Consumer purchased an added engine protector bar which were listed as suzuki genuine parts, while driving on the freeway, consumer heard a scraping noise, consumer then determined the top portion of the engine protector had become detached and had fallen foward, the bolt had sheered at the point where the bolt head meets the threaded section.*jb | |||
| FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY | |||
| 06/28/1998 | 1 | 02/27/1997 | |
| 1997 suzuki tl1000s motorcycle defective fuel tank, caused the fuel to leak through which could result in a fire. will be taking to the dealer. *ak | |||
| POWER TRAIN - CLUTCH ASSEMBLY | |||
| 3 | 02/23/2002 | ||
| There is a problem with oil leaking from the cylinder base gasket. *mr the oil leak problem was repaired under warranty and started to leak again in the same location. (at the cylinder base gasket) there were problems with the starter clutch. the gasket had to be replaced twice to stop the leak due to a gasket design that had been improved. the dealer stated that the leak should stop and never return. (model-dr650se) *scc *jb | |||
| 04/29/2003 | 1 | ||
| Concerns regarding the suzuki dl-1000 *mr vibration was reduced when slight pressure was applied to the clutch lever. the consumer believed there was a problem with the clutch which could result in catastrophic failure. *ts *jb | |||
| STRUCTURE - FRAME AND MEMBERS | |||
| 07/14/2008 | 17500 | ||
| Tl*the contact owns a 2005 suzuki boulevard (na). while mounting the vehicle with another passenger, the foot pegs detached from the frame when the contact attempted to place his foot on the pegs. if the contact were driving at the time of the failure, a serious crash could have occurred. the manufacturer was unable to assist because the vehicle was three years old. the failure mileage was 17,500. | |||