Triumph Bonneville 2001

Model Bonneville made in 2001 by Triumph got 12 consumer complains there is 1 investigation as well as 9 service bulletins. Consumer complaints with reference, among others things, to suspension, wheels. Technical service bulletines regarding communications, engine and engine cooling and equipment. The car had one investigation (wheels).

Model 2001

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
COMMUNICATIONS - HORN ASSEMBLY
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
EQUIPMENT - OTHER - LABELS
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL
TN-11110/19/200910032487Triumph motorcycles: workshop technicians and relevant staff are aware of contents for repair. this edition-cylinder head; carb adapter and efi adapter; headstock bearings; license plate bracket; front brake disc; headlight rim; starter s04/05/2010
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
8503/01/200610019987Technical news concerning triumph motorcycles. *ak05/18/2006
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY - PRESSURE RELIEF DEVICES
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
TB-10411/01/200810030792Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke12/02/2009
UNKNOWN OR OTHER
TN-11110/19/200910032487Triumph motorcycles: workshop technicians and relevant staff are aware of contents for repair. this edition-cylinder head; carb adapter and efi adapter; headstock bearings; license plate bracket; front brake disc; headlight rim; starter s04/05/2010

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
WHEELS
PE06019TRIUMPH MOTORCYCLES AMERICA LTD05/17/200609/19/2006BROKEN SPOKE/TIRE DEFLATION
 This pe was opened on the basis of 6 owner allegations concerning rear wheel spoke breakage with resulting rear tire inner-tube puncturing.no crashes were or have been alleged.after gathering information concerning this issue from subject vehicle owners, triumph dealers, and triumph motorcycles ltd, we find no defect trend currently exists concerning this subject.should circumstances change as a result of our continued monitoring, we will take appropriate action.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency reserves the right to take further actio if warranted by the circumstances.

Consumer Complaints


Fail datemilesoccurencesPurchase date
SUSPENSION - FRONT - HUB
12/16/200783558103/15/2001
 Rear wheel spoke broke while riding at approximately 35 mph - left, outer spoke. spoke then pierced the inner tube causing a flat tire and loss of control of the motorcycle. i was able to recover and maneuver the motorcycle to a nearby gas station to arrange for pickup. upon examination of the wheel, i noticed that the design of the hub flange is angled outward, putting additional stress on the spokes where they bend at the hub, causing them to all curve or bend, rather than go straight between the hub and the rim. this is different than all other motorcycles i've owned since 1971 and appears to have contributed to the failure. i have spoken or had correspondence with approximately 90 other owners of 2001-2007 triumph bonnevilles who have had similar failures however very few have reported them to the nhsta. more information on these individuals can be provided to the nhsta privately upon request. *tr
WHEELS
01/05/201134600
 Spoke broke in the rear wheel of my 2001 triumph bonneville while riding on the highway.
11/18/200518000108/30/2001
 Rear wheel: spoke on left side failed at point where spoke connects to hub. broken spoke did not cause flat tire in this instance but could have as spoke remnant was sticking out beyond the hub and if it had caught on any static structure, it would have been driven into the tube and tire. vehicle is 2001 triumph bonneville motorcycle. *jb
08/04/200529500310/01/2001
 Dt: while riding a 2001 triumph, bonneville motorcycle there is a recurrent problem of the spokes breaking off on the rear wheel. on the rear wheel there were four different types of spokes, the same spoke known as the outside left hand spoke was the spoke that continued to break. this problem occurred without any incident or damage to the motorcycle or wheel. it simply occurred on its own. the consumer took the motorcycle to the dealer for repairs, they replaced the spoke. the dealer did not know why this failure occurred. there was no apparent damage to the wheel or rim. this failure happened again while the consumer was driving on the road at 70 mph, and the failure resulted in a flat tire. a crash was somehow avoided. the motorcycle was taken to another authorized triumph dealer for repairs. the dealer could not offer a reason for this failure. consumer became concerned and contacted the manufacturer regarding the issue. triumph, america would not offer any remedy for the consumer, they stated this was most likely due to improper maintenance or some sort of road hazard. this is still a problem on the motorcycle at this time. triumph america,model of bonneville, 2001. *nm
09/01/20045000105/20/2002
 Broken spoke on rear wheel of 2001 bonneville, for no apparent reason. *jb
08/26/20051
 Broken spoke in the rear wheel of my 2001 triumph bonneville. the bike has been extremely well maintained, and never abused. i would not be concerned if so many other owners have not had the same experience of rear wheel spoke breakage. considering there are only 2 wheels on a motorcycle, and one has a history spoke breakage, this is a dangerous situation waiting to happen. thanks, phil. *jb
WHEELS - CAP/COVER/HUB
12/16/200783558103/15/2001
 Rear wheel spoke broke while riding at approximately 35 mph - left, outer spoke. spoke then pierced the inner tube causing a flat tire and loss of control of the motorcycle. i was able to recover and maneuver the motorcycle to a nearby gas station to arrange for pickup. upon examination of the wheel, i noticed that the design of the hub flange is angled outward, putting additional stress on the spokes where they bend at the hub, causing them to all curve or bend, rather than go straight between the hub and the rim. this is different than all other motorcycles i've owned since 1971 and appears to have contributed to the failure. i have spoken or had correspondence with approximately 90 other owners of 2001-2007 triumph bonnevilles who have had similar failures however very few have reported them to the nhsta. more information on these individuals can be provided to the nhsta privately upon request. *tr
WHEELS - RIM
10/09/2005305/15/2001
 I have had 3 spokes break on the rear wheel, on the 3rd time it caused a flat at highway speed. *jb

Car dealers selling


StateCityZipNamePhone
CAFRESNOWILSON'S CYCLES
CASIMI VALLEY93065SIMI VALLEY CYCLES805-522-3434
MEFALMOUTH04105STREET CYCLES207-781-4763
TXFORT WORTHEUROSPORT CYCLES817-838-8135