Triumph Speed Triple 1999
Model Speed Triple made in 1999 by Triumph got 3 consumer complains there are 2 recalls as well as 9 service bulletins. Consumer complaints with reference to fuel/propulsion system. . Technical service bulletines regarding communications, engine and engine cooling and equipment. There were some recalls concerningengine and engine cooling, fuel system, gasoline.
Model 1999
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | ||||||||||||||||
99V083000 | TRIUMPH MOTORCYCLES | from 11/01/1998 to 03/31/1999 | V (Vehicle) | 1198 | 04/19/1999 | MFR | TRIUMPH MOTORCYCLES AMERICA LTD | 04/15/1999 | 04/20/1999 | |||||||
Defect Summary | Vehicle description: motorcycles. oil can leak from between the crankcase halves. | |||||||||||||||
Consequence Summary | This can result in oil spillage forward of the rear tire and could, in some cases, cause vehicle instability. | |||||||||||||||
Corrective Summary | Dealers will replace the lower crankcase bolts. | |||||||||||||||
Notes | Owner notification began april 19, 1999. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ttriumph at 1-678-854-2010. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS | ||||||||||||||||
04V156000 | TRIUMPH MOTORCYCLES (AMERICA) LTD | from 07/01/1997 to 06/24/2003 | V (Vehicle) | 18998 | 07/30/2004 | ODI | TRIUMPH MOTORCYCLES AMERICA LTD | 04/07/2004 | 04/20/2004 | |||||||
Defect Summary | On certain motorcycles, the fuel connector linking each of the feed and return fuel hoses to the fuel pump mounting plate may fracture following in-service handling. | |||||||||||||||
Consequence Summary | Fuel could escape from the fractured body of the connector onto the engine or side of the bike. fuel leakage, in the presence of an ignition source, can result in a fire. | |||||||||||||||
Corrective Summary | Dealers will replace the connector. the recall began on july 30, 2004. owners should contact triumph at 1-678-854-2010. | |||||||||||||||
Notes | Customers can also contact the national highway traffic safety administration |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
COMMUNICATIONS - HORN ASSEMBLY | |||||
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE | |||||
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
EQUIPMENT - OTHER - LABELS | |||||
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
TN-111 | 10/19/2009 | 10032487 | Triumph motorcycles: workshop technicians and relevant staff are aware of contents for repair. this edition-cylinder head; carb adapter and efi adapter; headstock bearings; license plate bracket; front brake disc; headlight rim; starter s | 04/05/2010 | |
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
85 | 03/01/2006 | 10019987 | Technical news concerning triumph motorcycles. *ak | 05/18/2006 | |
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY - PRESSURE RELIEF DEVICES | |||||
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER | |||||
TB-104 | 11/01/2008 | 10030792 | Triumph motorcycle: headers discolouration, camshaft cover, horn, brake caliper sliding pin greasing, camshaft cap ladder bolts tightening sequence, oil pressure relief valve, new coolant, warning labels, engine control module (ecm) bracke | 12/02/2009 | |
UNKNOWN OR OTHER | |||||
TN-111 | 10/19/2009 | 10032487 | Triumph motorcycles: workshop technicians and relevant staff are aware of contents for repair. this edition-cylinder head; carb adapter and efi adapter; headstock bearings; license plate bracket; front brake disc; headlight rim; starter s | 04/05/2010 |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
FUEL/PROPULSION SYSTEM | |||
09/14/2005 | 10500 | 1 | |
I am the original owner of a 1999 triumph speed triple, vin# [xxx], color roulette green purchased at freehold triumph of freehold, n.j., currently with 11,356 miles. this has been a pampered and excellently maintained motorcycle that has only been stored inside climate controlled environments since purchase. i write to you due to a problem i am having with the paint separating from the gas tank in bubble formations throughout the tank. i first noticed this in 2005 on one part of the tank that was hidden and was not on the finished surface. the issue was bought to the attention of the authorized dealer i was having do 12k mileage service at that time. he did not take it too seriously and said at that time triumph would not cover this as a warranty issue. currently i am experiencing the paint separating in bubble formations throughout on exposed finished surfaces of the gas tank. as of this date after piercing the various locations there has not been gas leaking, though the gas tank has been emptied of gas due to having been stored long term. so i cannot say 100% that the tank is not leaking at those locations also. i am aware that currently there is a class action lawsuit against the maker of gas tanks manufactured for ducati & aprilia motorcycles. my gas tank is also made by the same manufacturer, acerbis. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr | |||
09/14/2005 | 10500 | ||
I am the original owner of a 1999 triumph speed triple, vin# smt500fm6xj074724, color roulette green purchased at freehold triumph of freehold, n.j., currently with 11,356 miles. this has been a pampered and excellently maintained motorcycle that has only been stored inside climate controlled environments since purchase. i write to you due to a problem i am having with the paint separating from the gas tank in bubble formations throughout the tank. i first noticed this in 2005 on one part of the tank that was hidden and was not on the finished surface. the issue was bought to the attention of the authorized dealer i was having do 12k mileage service at that time. he did not take it too seriously and said at that time triumph would not cover this as a warranty issue. currently i am experiencing the paint separating in bubble formations throughout on exposed finished surfaces of the gas tank. as of this date after piercing the various locations there has not been gas leaking, though the gas tank has been emptied of gas due to having been stored long term. so i cannot say 100% that the tank is not leaking at those locations also. i am aware that currently there is a class action lawsuit against the maker of gas tanks manufactured for ducati & aprilia motorcycles. my gas tank is also made by the same manufacturer, acerbis. |