Volvo Vn 1994
Model Vn made in 1994 by Volvo got 7 service bulletins. Technical service bulletines regarding engine and engine cooling, interior lighting and service brakes, air.
Model 1994
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| FSB-255-023 | 04/01/2012 | 10044246 | Volvo trucks: connector pin, replacement. severe fretting damage of the engine variable geometry turbocharger actuator (engine vgt actuator) harness and turbine shaft speed sensor (tss) connector may cause an unreliable signal to the engin | 05/24/2012 | |
| FSB-212-002 | 04/01/2012 | 10044249 | Volvo trucks: oil seepage at flywheel housing. this problem has already been solved in production, but the production solution is not compatible with previous generation flywheel housings. *js | 05/24/2012 | |
| INTERIOR LIGHTING | |||||
| FSB-357-002 | 04/01/2012 | 10044250 | Volvo: light control module (lcm), reprogramming. on some volvo units equipped with clear led clearance lights in the sun visor, the may exhibit an active fault code mid 216 psid 49 fmi 5. this fault indicates a trailer marker open issue wh | 05/24/2012 | |
| SERVICE BRAKES, AIR - SLACK ADJUSTERS | |||||
| SP-514-005 | 04/01/2012 | 10044253 | Volvo trucks: on the steering axle of the volvo trucks, the zerk fitting on the meritor slack adjuster comes into contact with the bolt head of the steering arm causing the fitting to break. *js | 05/24/2012 | |
| STRUCTURE | |||||
| SB-824-002 | 11/01/2009 | 10032747 | Volvo truck: to reduce the potential for cab water intrusion, a cab cowl seal has been released by engineering. the seal part number 8083305 is positioned above the top edge of the cowl panel to divert water flow onto the cowl panel rathe | 05/07/2010 | |
| STRUCTURE - BODY - ROOF AND PILLARS | |||||
| SP-891-004 | 02/01/2012 | 10043827 | Volvo: trucks built prior to 18/8/2011 were shipped without four (4) spring nuts pre-installed from the factory. *js | 04/27/2012 | |
| STRUCTURE - FRAME AND MEMBERS | |||||
| SB-824-002 | 11/01/2009 | 10032747 | Volvo truck: to reduce the potential for cab water intrusion, a cab cowl seal has been released by engineering. the seal part number 8083305 is positioned above the top edge of the cowl panel to divert water flow onto the cowl panel rathe | 05/07/2010 | |