Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| STRUCTURE | |||||
| FSB-891-013 | 01/01/2011 | 10040054 | Volvo trucks: vehicles with partial chassis fairings may experience damage to the fairing | 08/15/2011 | |
| FSB-891-013 | 01/01/2011 | 10040054 | Ready | 08/15/2011 | |
| SB-824-002 | 11/01/2009 | 10032747 | Volvo truck: to reduce the potential for cab water intrusion, a cab cowl seal has been released by engineering. the seal part number 8083305 is positioned above the top edge of the cowl panel to divert water flow onto the cowl panel rathe | 05/07/2010 | |
| STRUCTURE - BODY | |||||
| FSB-891-013 | 01/01/2011 | 10040054 | Ready | 08/15/2011 | |
| FSB-891-013 | 01/01/2011 | 10040054 | Volvo trucks: vehicles with partial chassis fairings may experience damage to the fairing | 08/15/2011 | |
| STRUCTURE - BODY - DOOR | |||||
| FSB-845-001 | 09/01/2010 | 10034909 | Volvo truck: door seal, outer, replacement. the outer seal on the cab doors of volvo model trucks may prematurely separate from the cab shell. models vn-2, vhd-2 and vt. no model years listed. *pe | 01/26/2011 | |
| STRUCTURE - BODY - ROOF AND PILLARS | |||||
| SP-891-004 | 02/01/2012 | 10043827 | Volvo: trucks built prior to 18/8/2011 were shipped without four (4) spring nuts pre-installed from the factory. *js | 04/27/2012 | |
| STRUCTURE - FRAME AND MEMBERS | |||||
| SB-824-002 | 11/01/2009 | 10032747 | Volvo truck: to reduce the potential for cab water intrusion, a cab cowl seal has been released by engineering. the seal part number 8083305 is positioned above the top edge of the cowl panel to divert water flow onto the cowl panel rathe | 05/07/2010 | |
| STRUCTURE - FRAME AND MEMBERS - UNDERBODY SHIELDS | |||||
| SP-252-024 | 01/01/2011 | 10040144 | Ready | 08/16/2011 | |
| SP-252-024 | 01/01/2011 | 10040144 | Volvo: an exhaust pipe insulation blanket can deteriorate over time. a new blanket has been released to protect from road splash. *rm | 08/16/2011 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| STRUCTURE - FRAME AND MEMBERS | |||
| 02/25/2011 | |||
| Owner called into odi and reported that his my 2008 volvo 780 was cracked at welds in the frame. vehicle bouight used from advantage volvo-gmc in charlotte, nc in novmebr 2010 and used in line haul service. owner described welding onthe top face area of the frame. [odi note; most trucks frames are heat treated and no welding permitted; requested owner to provide photographs - gtb.] | |||