Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| TB-M2009-008 | 05/07/2009 | 10030233 | Yamaha motorcycle: hard to start when cold, erratic, or won't idle. a possible cause is insufficient valve clearance. effects all yzf-r6v/w/x models and yzf-r1/r6 models. no model years listed. *pe | 08/27/2009 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| ENGINE AND ENGINE COOLING | |||
| 10/29/2007 | 980 | 3 | 10/09/2007 |
| Has extreme throttle lag in second gear at around 5500 rpm. problem isn't present everytime, but can be duplicated by putting the bike into second gear and staying at 5500 rpm for 1 to 2 seconds and then applying generous throttle. a lag usually around 3 seconds after power application can be felt. it has caused me to almost be involved in 2 accidents due to this issue. at that rpm and gear setting the bike is unsafe due to the lack of throttle response and can cause an extremely unsafe situation on the public roads for not only the motorcyclist but for other motorists as well. *tr | |||
| 03/29/2007 | 4 | 4 | 03/20/2007 |
| I recently purchase a 2007 yamaha yzf r-1. understandings it is the first year yahmaha uses this technology on the r1s was a concern. but i bought it anyway. my fears came true when merging onto freeway. the bike has a dangerous throttle lag in 2nd gear at 5500rpms (45mph). this is an unsafe situation on any vehicle but esp a 2 wheel motorcycle. apparently there is no fix for the problem and yamaha is not planning a recall despite knowing of the hazardous position it has placed its customers in. *tr | |||
| 04/08/2007 | 99 | 04/06/2007 | |
| While taking my 2007 yamaha r1 in second gear to 5500 rpms. once i open the throttle, the bike does not respond for a second or two. but if i take the rpms to 5000 or 6000 the response is immediate. this has happened to me since the day i rode the bike off of the dealers lot. i have not been able to yet fix the problem. *tr | |||
| 04/16/2007 | 750 | 10 | 12/15/2006 |
| 2007 yamaha yzf-r1 super sport motorcycle. there is a constant failure mode in the engine mapping that causes slow engine acceleration in the following conditions: 2nd gear, 5500 rpms. this condition can become a significant safety issue when maneuvering in heavy traffic, or expecting engine power to help stand the motorcycle up after a tight turn. after contacting yamaha, i was told that the engineers has evaluated the condition as a characteristic of the motorcycle and not a safety issue. yamaha has no plans to correct this issue. | |||
| 03/17/2007 | 100 | 8 | 02/02/2007 |
| I purchased my motorcycle brand new and noticed one day while trying to accelerate in second gear after slowing that the bike did not respond. the bike acted as if in slow motion and then all of a sudden the power returned to it. it will continue to do it to this day and i do not know why. i have since learned it is a widespread problem. i believe it is a very real safety issue due to the fact that it has happened once when i was trying to get out of the way of a vehicle that was moving into my lane. luckily they noticed me at the last minute but i can't expect that to always be the case. *jb | |||
| 03/01/2007 | 1100 | 5 | 12/16/2006 |
| The motorcycle has stalled on several occasions, when slowing down with the clutch engaged. *jb | |||
| ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||
| 04/27/2007 | 30 | 15 | 02/10/2007 |
| My 2007 yamaha r1 1. the bike cuts off almost every time i come to a stop. it does not matter whether the bike is in neutral or in gear with the clutch pulled in. it died approximately. 15-20 times on my ride. 2. if i blip/rev the bike in neutral or while in gear with the clutch pulled in, the bike shuts of as well. 3. i was merging on the freeway in second gear and when i went to speed up, the bike hesitated for about 3-4 seconds and then very slowly picked up. i was almost hit by the car behind me. i realized that if i'm at 5500 rpm's in second gear for a few seconds and then open the throttle, it causes this lag every single time. this is definitely not safe! i was almost rear ended by a car. 4. the bike also reached 250 degrees several times under cruising conditions. i can't even trust this bike to stay running either 'cause it seems it dies every time i come to a stop. 5. the bike also sometimes takes quite a few tries to start it. i have to hold down the starter for about 3-5 seconds sometimes. *tr | |||
| ENGINE AND ENGINE COOLING - ENGINE | |||
| 06/01/2010 | 12000 | ||
| 2007 yamaha yzf-r1. manufacturer defect that causes the intake valve in the number 4 cylinder to rub on the guide and causes the valve to break off into the cylinder. i was lucky enough to catch it early and took it to my repair guy. he dissasembled the head and found the bad valve. sent it out to be machined and the machinest was unable to get a valve guide to press in due to the bad machining from the factory. he then had to machine it out and replace with a different guide. i called yamaha when this was happening and they told me that no one else had reported a problem like this. i later learned that they do know about it and it is a reacurring problem found in many of the 2007 r1's primaraly those stamped 02/07 on the vin. i called yamaha back and they said there was nothing that they would do since the work was already done and it was not under warranty. more information can be found on the r1 forum under the mechanical help thread. titled recall on 07/08 should they? can we push this? i first noticed that the bike was losing a little power and then it began to get worse. | |||
| 04/01/2007 | 2 | 04/01/2007 | |
| I recently purchased the 2007 r-1 motorcycle and have been having continuous problems with the throttle lag. 2nd gear at 5500 mph the motorcycle had no power. i found this to be very dangerous when passing vehicles and accelerating through turns. i felt that yamaha was not doing their part to fix the problem. $12,000 later and unhappy. please help. *ak | |||
| 12/19/2006 | 50 | 50 | 12/13/2006 |
| This motorcycle consistently refuses to accelerate when in second gear at approximately 550rpm or 49 mph. there is a substantial delay in response and a very slow increase in speed until nearly 70 mph is reached when it starts to accelerate as normal. there are no fault codes or any other abnormal indications, and this can be recreated at any time. this poses a significant hazard for collision avoidance as well as merging with existing traffic. *tr | |||
| 03/02/2007 | 20 | ||
| 2007 yamaha r1 motorcycle has a problem! the engine cuts out at around 5500 rpm. if your at this rpm and open the throttle it will not respond at all for a few seconds, then it will take off. i found this to be very dangerous. it almost coused an accident.*ak | |||
| 12/01/2006 | 1 | 20 | 12/01/2006 |
| Tl* - the contact owns a 2007 yamaha motorcycle yzf-r1. when the motorcycle is in 2nd gear and at 5500 rpms, the motorcycle hesitates for approximately 3-4 seconds when he tried to accelerate. the contact had not taken the motorycle to be diagnosed. the failure mileage was 1 mile, and the current mileage was 743 miles. | |||
| 03/10/2007 | 98 | 4 | 02/23/2007 |
| (1) throttle lag on 2007 yamaha r1, try to accelerate in 2nd gear at 5500 rpm's and the bike doesn't move, then all of the sudden a violent jerk and the bike is now violently acceleration. (2) i was in traffic trying to pass a vehicle and almost got run over due to the lag. there is no fixed report, but the european bikes don't have this so a new ecu would fix it. or a reflash of the ecu. (3) the rearset (aka footpeg brackets) are breaking off when weight is applied. standing up on the bike or just putting pressure on them will cause them to snap. (4) friend who has the same bike broke his foot when the reset broke. (5) had to buy aftermarket rear sets to avoid this problem. spent $ 500, on a product i should not have to buy..yamaha needs to reimburse me or send me new ones. *jb | |||