Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
EXTERIOR LIGHTING
SIB-63-02-0108/01/201010037025Ready04/27/2011
SIB-63-02-0108/01/201010037025Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm04/27/2011
EXTERIOR LIGHTING - HEADLIGHTS
SIB-63-03-1104/01/201110040057Ready08/15/2011
SIB-63-03-1104/01/201110040057Bmw: wiring on the headlights may have deteriorated due to environmental conditions and the cover not being secured properly. e60/e92. *rm08/15/2011
SI B63-04-0806/01/200810025983Bmw: headlamp moisture: fault diagnostics. water or condensation in one or both headlamps. models 5 series, 6 series, 7 series, x5, x6, 1 series, and 3 series. model years 2000-20008. *pe09/22/2008
EXTERIOR LIGHTING - TAIL LIGHTS
B63-03-1204/01/201210044032Bmw: the left or right rear light in the side panel has condensation concerning vehicles produced up to february 27,2012. *js05/08/2012
SIB-63-02-0810/01/201010035224Bmw vehicle: rear bulb failure. the bulb out warning shows in the instrument cluster. diagnosis shows a fault for the rear lamp. the bulb out can be displayed for 2 possible causes: poor fit between the bulb and bulb holder; bulb failur02/11/2011
SI B63 02 0805/01/200810025585Rear bulb failure. model e92 (3 series coupe) vehicles produced up to january 21, 2008 are affected. the bulb out warning shows in the instrument cluster. *pe08/22/2008
63030602/01/2007SI B63-03-0610020856Poor connection at rear lamp connector. bmw. model e46. *kb model e46 (3 series). update 8/8/2008. *pe01/24/2007

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
EXTERIOR LIGHTING
PE09036BMW OF NORTH AMERICA, LLC08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
EXTERIOR LIGHTING - BRAKE LIGHTS
PE09036BMW OF NORTH AMERICA, LLC08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
EXTERIOR LIGHTING - TAIL LIGHTS
PE09036BMW OF NORTH AMERICA, LLC08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
EXTERIOR LIGHTING - TURN SIGNAL
PE09036BMW OF NORTH AMERICA, LLC08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.

Consumer Complaints


Fail datemilesoccurencesPurchase date
EXTERIOR LIGHTING
10/16/201252300
 I received a recall letter from bmw for the problem with rear lamps. at that time,all real lamps were working on my car. however for safety concern, i brought my car to be checked; few months later, one of the tail light not working. i took my car back to the dealer, they said they were done for the recall . i need to pay if i want to fix the problem. but i found there was no positive voltage on the light bulb circuit. i traced the wire and discovered the wire was broken. then i also found all other wires for the tail lights were aging, the plastic of the wires were deteriorated and the copper wire explored to visible. that mean the dealer didn't do the right work last time. because it's no reason the wire will deteriorate that fast if they did it right for the recall. i complaint to bmw and the representative said they already done with my car. if i need any work to be done i need to pay by myself. the copper wires explored to visible, it would cause electric fire. this is a safety issue. i have the picture showing the aging wire condition on my car. i can email to you if you need it