Bmw R1200c 2002

Model R1200c made in 2002 by Bmw got 5 consumer complains there is 1 investigation as well as 3 service bulletins. Consumer complaints with reference, among others things, to power train, seats and service brakes, hydraulic. Technical service bulletines regarding exterior lighting, fuel system, other. The car had one investigation (fuel system, gasoline).

Model 2002

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
EXTERIOR LIGHTING
SIB-63-02-0108/01/201010037025Ready04/27/2011
SIB-63-02-0108/01/201010037025Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm04/27/2011
FUEL SYSTEM, OTHER
SB-00-021-0711/01/200710030825Bmw motorcycle: engine fuels containing ethanol. bmw motorrad has no objection to the use of si engine fuels containing up to a maximum of 10% ethanol and imposes no warranty restrictions. ethanol mixtures in proportions higher than 10%12/07/2009

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS
PE03054BAYERISCHE MOTOREN WERKE12/01/200301/23/2004FUEL LINE LEAKAGE04V028000
 Bmw is conducting a recall (04v-028).an information request(ir)response was not received. upon bmw's receipt of the ir, and after discussions with odi, bmwdetermined that a recall was necessary. on certain motorcycles, the o-ring contained within the fuel line quick-disconnect coupling could become damaged.further, there is also a problem involving crimp-type hose clamps, which can also result in a small fuel leak.dealers will inspect, and if necessary, adjust all crimp-type hose clamps.also all fuel line quick-disconnect couplings will be inspected.if a leak is detected, the quick-disconnect o-ring will be replaced.if damaged, the coupling will be replaced.owner notification is expected to begin during february 2004.

Consumer Complaints


Fail datemilesoccurencesPurchase date
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE
04/03/20045500108/28/2003
 I own a 2002 bmw r1200c that had about 5500 miles on it before the following failure; the bearing on the end of the clutch slave cylinder piston failed, spinning the slave cylinder piston in it's bore, burned the brake fluid and bled aluminum particles throughout the hydraulic clutch circuit. this rendered the clutch lever inoperable and i could no longer put the motorcycle in neutral. i had to pull over on the shoulder of the highway and let the bike stall in gear, which had a tendency to lock up the rear tire. bmw fixed the problem under warranty, but i've found out through conversation with several mechanics, this particular problem happens fairly frequently. if this is a design flaw, how long will it be before the new components fail.
SEATS - FRONT ASSEMBLY - RECLINER
06/22/2002
 While riding backrest fell off.*ak
06/22/20021
 While riding, back rest fell off.*ak *yh
06/22/2002
 While riding back rest fell off.*ak outside scope of recall_id 11776 (00v-289)
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
04/03/20045500108/28/2003
 I own a 2002 bmw r1200c that had about 5500 miles on it before the following failure; the bearing on the end of the clutch slave cylinder piston failed, spinning the slave cylinder piston in it's bore, burned the brake fluid and bled aluminum particles throughout the hydraulic clutch circuit. this rendered the clutch lever inoperable and i could no longer put the motorcycle in neutral. i had to pull over on the shoulder of the highway and let the bike stall in gear, which had a tendency to lock up the rear tire. bmw fixed the problem under warranty, but i've found out through conversation with several mechanics, this particular problem happens fairly frequently. if this is a design flaw, how long will it be before the new components fail.

Car dealers selling


StateCityZipNamePhone
NJMETUCHEN18840CROSS COUNTRY BMW732-635-0094