Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SUSPENSION
05031001912/01/200510019576Information on run flat, zero pressure or extended mobility tires (emt) and unique servicing techniques. *tt03/24/2006
05030800404/01/200510017345Revised front and rear upper and lower ball joint stud nut tightening specifications. *tt11/03/2005
00031000102/01/2000611292Some customers may comment on a repeated occurrence of having a low tire pressure message displayed on the driver information center for a specific tire and wheel location on vehicles built prior to vin breakpoint y5001500. *tt06/01/2000
SUSPENSION - FRONT - SPRINGS - COIL SPRINGS
PIC-5335-A12/01/201210051239Cadillac/chevrolet: for no apparent reason, the front and/or rear, composite springs would crack and/or become broken. models 2004-2009 xlr; 1997-2013 corvette. *pe02/25/2013
SUSPENSION - REAR
335910013549Lower rear shock attaching bolt may break after torqued. *tt04/21/2005
SUSPENSION - REAR - SHOCK ABSORBER
313210010628Lower rear shock attaching bolt may break after torqued. *tt12/02/2004
SUSPENSION - REAR - SPRINGS - COIL SPRINGS
PIC-5335-A12/01/201210051239Cadillac/chevrolet: for no apparent reason, the front and/or rear, composite springs would crack and/or become broken. models 2004-2009 xlr; 1997-2013 corvette. *pe02/25/2013

Consumer Complaints


Fail datemilesoccurencesPurchase date
SUSPENSION
12/06/2000105/01/2000
 Active handlings system which is designed to detect spin out and brake opposing tires to control yaw vs. steering wheel angle activated while i was driving at high speed in a straight line causing a dangerous spin out and loss of control on the highway. service active handling light then illuminated. unexpected and uncalled for activation of the system caused loss of control of the vehicle and a near collision at high speed. *ak
SUSPENSION - FRONT - CONTROL ARM - LOWER BALL JOINT
12/28/2005900015004/20/2002
 Dt*: the consumer stated the rear and side windows have spots/haze that were present in the glass which obstructed the consumer's vision while driving at night. the manufacturer determined the only way to remedy the problem would be to replace the glass. additionally, the consumer noticed slight movement in the front end when driving. during normal routine maintenance, the consumer discovered both front upper and lower ball joints were not torqued correctly during manufacturing. the local dealership was contacted and provided instructions on how to correctly torque the ball joints. *jb updated 2/7/2006 - the rear ball joints had to be re-torqued. *nm
SUSPENSION - FRONT - CONTROL ARM - UPPER ARM
03/22/20021
 Forward mounting bracket for the lr upper control arm for the suspension sheared...further investigation has shown a crack in the frame rail underneath the bracket. not sure what came first, the crack in the frame, causing the bracket to shear off, or the bracket failing, putting stress on the frame and cracking the frame...either way...not good!!*aki
SUSPENSION - FRONT - CONTROL ARM - UPPER BALL JOINT
12/28/2005900015004/20/2002
 Dt*: the consumer stated the rear and side windows have spots/haze that were present in the glass which obstructed the consumer's vision while driving at night. the manufacturer determined the only way to remedy the problem would be to replace the glass. additionally, the consumer noticed slight movement in the front end when driving. during normal routine maintenance, the consumer discovered both front upper and lower ball joints were not torqued correctly during manufacturing. the local dealership was contacted and provided instructions on how to correctly torque the ball joints. *jb updated 2/7/2006 - the rear ball joints had to be re-torqued. *nm
SUSPENSION - REAR
01/15/1999
 Heard a loud noise from rear end whenever a turn was being made. also, steering column intermittently locked up. dealer notified. feel free to provide further details. *ak