Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
STRUCTURE - BODY
230470205/04/2004230130410007922Interior front door handle/bezel replacement. *mj07/15/2004
230110305/09/200310002403Sag or rattle at rear of headliner. *tt08/27/2003
233599REVA10/01/1999233599612160Subject on the child seat tether anchors. *mjs06/06/2000
23070002/25/2000233098610012Experiencing wind noise heard from the sunroof or b-pillar forward in the vehicle while driving at highway speeds above 55 mph or at lower speeds into a headwind. *tt04/13/2000
18329809/25/1998603635Subject on flash programming failure recovery. *yc11/17/1999
23299807/10/1998602333Experiencing water leakage on top of floor and/ or under floor carpets. *yc11/16/1999
23489810/23/1998602883Rear door trim panel loose at top rear corner. *ak01/20/1999
23289807/02/1998602334Water and / or dust collection in the spare tire well or at the trunk floor to quarter panel seam. *yc10/26/1998
23309807/17/1998602332Wind noise heard from the b-pillar forward in the vehicle while driving at highway speeds above 55 mph or at lower speeds driving into a headwind. *yc10/26/1998
23299808/07/1998602210Water leak on top and/or under floor carpets. *yc10/15/1998
32119805/08/1998601666Concerns of a wavy roof sheet metal or dents in the approximate area of the structural headliner membrane. *yc08/19/1998
23209805/15/1998601661Condition concerning the glove box not closing or requires excessive effort to latch. *yc08/19/1998
23119803/13/1998600892Condition with wavy roof sheet metal or dents in the approximate area of the structural headliner membrane. *yc06/10/1998
23079802/06/1998600357Provided information on both traditional and non-traditional body gaps and flushness specifications. *yc05/12/1998
STRUCTURE - BODY - DOOR
23040002/04/2000610009Concerns with the door trim panel cracking at lower attaching screw bosses. *tt04/13/2000
08299909/02/1999081898607910Concerns with inadvertent door lock operation. *tt10/18/1999
23059902/12/1999234898604360Subject regarding rear door trim panel loose at upper rear corner. *tt04/27/1999
23539810/30/1998602777Door trim panel rattle/itch noise where vinyl wrapped top section contacts the door inner sheet metal. *ak01/13/1999
08189805/22/1998601678Inadvertent door lock operation. *yc08/19/1998
STRUCTURE - BODY - TRUNK LID
232099A08/13/1999232099608371Daimler chrysler is now offering internal emergency trunk releases for selected vehicles. *tt11/23/1999
992506/03/1999607554Subject regarding the internal emergency trunk release. *tt09/28/1999
992606/23/1999607553Information pertaining to internal emergency trunk release dealer reimbursement. *tt09/28/1999
23209906/25/1999606174Diamler chrysler corporation is now offering internal emergency trunk releases for selected vehicles. *tt08/11/1999

Consumer Complaints


Fail datemilesoccurencesPurchase date
STRUCTURE
11/27/200128000011/27/2001
 This car has multiple problems. i find that the complaints with the windows are consistent e.g. won't roll down on passenger side front and off track driver's side front. i have water collecting on the driver's side front after lots of rain. the molding on the car whether it be the headlights or around the doors does not stay in place. the trunk vent has been replaced and the struts and sway bar had to be replace shortly after the purchase. *nlm
 Vehicle design with the high trunk causes poor visibilty for driver. nlm
STRUCTURE - BODY
01/31/2007112000101/01/2004
 Tl* the contac owns a 1997 chrysler concord. the body mount on the vehicle wore out, and the contact was concerned that if the vehicle got into an accident the body would disconnect from the frame. the manufacturer stated that there was nothing they could to to repair the body mount. the contact has pictures of the vehicle. the current and failure mileage was 112,000. *ak
02/13/20010
 Floor on driver's side will get flooded each time that it rained. dealer can not find out where water is coming from. then, there will be a mildew smell.
03/03/19981
 The consumer noticed that vehicle was sold with big dents in the body of vehicle, manfacturer agreed to fix the dents in the sheet metal. the manufacturer has been contacted. *ak consumer learned of the defective roof ripples.*slc
STRUCTURE - BODY - DOOR
06/19/2007107000402/15/1999
 I would like to file a complaint with daimler-chrysler regarding the longevity of their automobiles. thiswas the second vehicle that failed between 100,000 and 110,000 with proper maintenance and upkeep. i had problems with the headlights, door seals, the automatic seats and now the engine. i took the car to chrysler dealer, and the service department manager told me i had a bad rod and the engine was virtually shot and wasn't worth fixing. he said he was ashamed to say the 2.7 engines were junk. i have researched my car and found out that there were a lot of others with the same, if not more problems than what i had, which indicated that daimler-chrysler should be ashamed of for not caring or making good for their mistakes instead of ignoring them! this car has had many other problems, including electrical problems with door locks, the power seats, and the seals from around the doors. i made the mistake of not researching the vehicle before i bought it. i will never do that again! i just wish that daimler-chrysler would care more about their cars, and the consumers that were buying them, and then maybe they would have more sales since their customer service stinks. i really didn't want to say a true statement about service for daimler-chrysler problems. i will never buy a daimler-chrysler product again, as per my own experiences with problems and the responses from the company. if i have no satisfaction from this email, which i know will not happen!, i will make sure that others know what i have been through!, especially will all the veterans that i know and have contacts with since september 11, 2001.*ak
STRUCTURE - BODY - HOOD
11/06/20041
 Lost of vehicle hood cowl panel while driving. all 7 original cowl panel fastening steel clips were undisturbed not the result of wear and tear, but inferior product or inadequate design. *bf nar *jls the consumer stated while going 65 mph a large black object flew against the front windshield and over the vehicle. the consumer would like to be reimbursed for the cost of the repair. *tc *jb
01/21/2003
 Traveling at 70mph on the highway, the plastic molding which is under the hood, part #4805701aa, broke. it hit the windshield and flew and damage the car behind who was driving the same direction. dealer has been notified, and got a new redesigned molding. please provide further information. ph
STRUCTURE - BODY - HOOD - HINGE AND ATTACHMENTS
06/10/20031
 Hood attachment has a plastic piece that is connected to the mode of vehicle, flew off while traveling on the highway. *ak
STRUCTURE - BODY - TRUNK LID
12/01/20042
 Consumer noticed that the headlights were fogged up. this caused poor visibility to the driver when driving at night. vehicle was taken to the dealer for inspection, and mechanic determined that the headlights needed to be replaced. also, trunk lid would fall intermittently, causing injury to consumer's shoulders. vehicle was taken to the dealer for inspection, and mechanic determined that the shocks needed to be replaced. *ak