Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
STRUCTURE - BODY | |||||
233599REVA | 10/01/1999 | 233599 | 612160 | Subject on the child seat tether anchors. *mjs | 06/06/2000 |
236197 | 11/28/1997 | 6089112 | This bulletin involves oil canning noise coming from box area. *nlm | 01/13/2000 | |
231798 | 05/01/1998 | 601664 | Center arm rest upper inertia latch cover on driver's side broke. *ak | 08/19/1998 | |
STRUCTURE - BODY - DOOR | |||||
233598 | 08/07/1998 | 602207 | When removing door trim panel from the door, it is extremely important that each individual plastic retainer clip is separated from door by using atrim panel removal too, such as snap on tool a161b/door panels should never be removed by h | 10/15/1998 | |
STRUCTURE - FRAME AND MEMBERS | |||||
230397 | 02/14/1997 | 51942 | Difficult to clean light colored chalky residue from plastic body components that are molded in black. *tw | 07/17/1997 |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
STRUCTURE | ||||||
RQ00012 | CHRYSLER GROUP LLC | 05/03/2000 | 04/20/2001 | HOOD LATCH | 01V040000 | |
Onmarch 20, 1995, daimlerchrysler filed a defect report for 181,008 1994 and 1995 dodge ram trucks manufacturedc from january 21, 1994 - october 25, 1994 at the dodge city assembly plant and from march 26, 1994 - december 8, 1994 at the lago alberto assembly plant.the secondary hood latch rod could bind on the guide bracket and prevent engagement of the secondary latch.if this occurs when the primary latch is not engaged, the hood could fly up when the vehicle is being driven and obstruct the drier's vision increasing the potential for a crash.the recall remedy was to replace the sedcondary hood latch.owners were notified in august of 1995.this recall rate as of 2/97 was 68% | ||||||
RQ00012 | CHRYSLER GROUP LLC | 05/03/2000 | 04/20/2001 | HOOD LATCH | 95V056000 | |
Onmarch 20, 1995, daimlerchrysler filed a defect report for 181,008 1994 and 1995 dodge ram trucks manufacturedc from january 21, 1994 - october 25, 1994 at the dodge city assembly plant and from march 26, 1994 - december 8, 1994 at the lago alberto assembly plant.the secondary hood latch rod could bind on the guide bracket and prevent engagement of the secondary latch.if this occurs when the primary latch is not engaged, the hood could fly up when the vehicle is being driven and obstruct the drier's vision increasing the potential for a crash.the recall remedy was to replace the sedcondary hood latch.owners were notified in august of 1995.this recall rate as of 2/97 was 68% |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
STRUCTURE | |||
2 | 12/01/2001 | ||
The camper was put on when new. the bed on this vehicle cracked in the bed behind the cab about 2 inches back to going across the bed all the way. | |||
STRUCTURE - BODY | |||
12/01/1995 | 09/27/1994 | ||
Paint is flaking all around the body. mainly on the hood and roof. | |||
09/17/1997 | |||
Both sunvisors' retainer clip came off, dealer replaced clips. *ak | |||
04/09/1997 | 1 | 06/30/1994 | |
Steel bed floor split. | |||
08/16/1994 | 6 | ||
Center console missing bolts/sits crooked. | |||
11/01/1994 | 1 | ||
Sun visor attachments to roof broke off. *skd | |||
08/01/1994 | 1 | ||
Sunvisor holder/clip failed. *ak | |||
10/25/1994 | 1 | ||
Left front sunvisor clip broke. *skd | |||
STRUCTURE - BODY - BUMPERS | |||
11/07/1995 | |||
Had trailer hitch with less than specified weight on it and bumper came loose. tt | |||
STRUCTURE - BODY - DOOR | |||
2 | 04/07/1997 | ||
Driver's side electric lock switch failed. | |||
07/10/1995 | 1 | ||
The driver side door leak water. *ak | |||
07/02/1994 | 1 | ||
Door handle controls have been energized, causing delay in getting out of vehicle. tt | |||
STRUCTURE - BODY - DOOR - HINGE AND ATTACHMENTS | |||
03/15/1995 | 5 | ||
Door misaligned. | |||
STRUCTURE - BODY - TAILGATE | |||
03/15/1995 | 5 | ||
Tailgate handle fell off. | |||
STRUCTURE - FRAME AND MEMBERS | |||
11/15/2002 | |||
While driving vehicle, if vehicle hits a bump in the road. consumer states' the vehicle will shimmey really bad vehicles all other the road. consumer has to pull over and stop to get vehicle to stop the shimmering. cause is unknonw. please provide any further information. ts | |||
11/01/1999 | 1 | ||
Driver side floor corroded thru allowing water to soak carpet. | |||
12/01/1995 | 09/27/1994 | ||
Paint is flaking off all around the body, mainly roof and hood. | |||
04/01/1997 | 07/09/1994 | ||
Factory defect in material, workmanship or factory preparation, causing orignal paint to peel off vehicle. *ak | |||
03/16/1994 | 6 | ||
Bed of pickup truck cracked. *dh | |||
02/07/1995 | 1 | ||
Broken frame. *ak |