Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
UNKNOWN OR OTHER
10-00-89-017C02/01/201110038295Ready06/14/2011
10-00-89-017C02/01/201110038295Gm: information on fixing multiple situations right the first time. *rm06/14/2011
0067701/01/200400677A10007713Snow plow prep package information - service vme. *mj07/08/2004
020604054A01/01/200302060405410000936Increased accelerator pedal effort. *tt04/04/2003
02-06-04-03704/01/2008020604037D634786Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel ses light, with diagnostic trouble code p0446 set. *tt10/09/2002
010866005B08/01/2002010866005A634817Subject regarding availability of pickup box reinforcement kits for toolbox / rear window barrier / ladder rack applications. *tt10/09/2002
07080108/07/2001625314Information regarding pick-up box reinforcment kits, for when adding toolboxes or ladder racks. *slc11/19/2001
01085600205/01/2001619745Some customers may have concerns with the security lamp illuminating while driving; the security lamp may be on or off; the engine cranks but will not start and the security lamp is flashing; and / or the engine starts then stalls and the s06/28/2001
28110011/28/2000616392Some vehicles equipped with instrument panel clusters that contain a message center may have customer complaints of a change engine oil lamp illumination. *tt02/25/2001
00060402406/01/2000614354Some drivers may comment about the service engine soon lamp illuminating. the powertrain control module may have stored a diagnostic trouble code p0300, engine misfire detected. *tt10/11/2000
00060400602/01/2000611273Some customers may comment about the service engine soon lamp being illuminated with no other driveability concerns noticed on vehicles built prior to the vin breakpoints mentioned in this bulletin. *tt05/31/2000

Consumer Complaints


Fail datemilesoccurencesPurchase date
UNKNOWN OR OTHER
11/17/201199000
 The frame on the truck is cracked several inches in a couple of places and rotted. it is very thin and i was told there was nothing solid to weld to and repair it. they said i would have to have the frame replaced. the truck has just turned 100000 miles. i have had it for six years and take excellent care of it. it runs great. the body is in excellent shape, there is one small hole in the driver side rocker panel i was going to repair in the near future ( i do not know if i will now bother). other than that the body is near perfect. there is no rot in the floors or truck bed. the repair shop could not believe how bad the frame is when the truck looks so great. i have found a number of complaints on the internet similar to this, maybe if enough people speak up something will get done. also, the anti lock brakes have not worked for some time now. i was told they get rust in the assembly and do not work right. i have also had several brake lines break and need to be replaced. i realize that brake lines do rust over time and do need to be replaced (they should be made from stainless steel from the factory) but the anti locks should work and a frame should not rot and crack as it has.
03/18/2011139740
 Attempting to stop for a school bus, as i pressed on the brake pedal it went to the floor and the truck did not come to a complete stop. after pulling over, it was discovered that the brake line was leaking fluid on the ground. upon further inspection, noticed the brake lines are corroded. be it know that the frame and body parts on this truck are also rusted as to not pass state inspection. the truck is just over 10 years old and unsafe to drive due to multiple manufacture defects.