International Harvester Loadstar Series 1977
Model Loadstar Series made in 1977 by International Harvester got 8 recalls. There were some recalls concerningengine and engine cooling, equipment and parking brake.
Model 1977
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL | ||||||||||||||||
| 79V212000 | INTERNATIONAL HARVESTER | from 01/01/1973 to 09/01/1978 | V (Vehicle) | 2950 | 10/26/1979 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 09/18/1979 | 12/12/1979 | |||||||
| Defect Summary | The fuel separators on the involved vehicles may have thin walls due to a material thickness problem. the separators in these walls may crack and may allow fuel vapors or liquid fuel to leak into the engine under high pressure conditions. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | The dealer will install improved separators and relocate both the separator and fuel canister without charge. | |||||||||||||||
| Notes | Vehicle description: buses equipped with fuel tank evaporative emissionsystems.system: fuel; fuel tank.consequences of defect: leaking fuel in the presence of a source of ignitioncould lead to a vehicle fire and injury to vehicle passengers. | |||||||||||||||
| 78V145000 | INTERNATIONAL HARVESTER | from 01/01/1973 to 10/01/1977 | V (Vehicle) | 2500 | 08/11/1978 | ODI | INTERNATIONAL TRUCK & ENGINE CORPORATION | 06/21/1978 | 10/12/1979 | |||||||
| Defect Summary | The vapor separator in the fuel tank evaporative omission system lacks the capacity to prohibit liquid gasoline from passing to the canister under certain fuel expansion conditions. gasoline would be discharged from the bottom of the canister onto the rear of engine, creating a fire hazard. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Dealer will install an additional fuel separator to enlarge capacity, and add a discharge hose to the bottom of the fuel canister. | |||||||||||||||
| Notes | Vehicle description: medium trucks.system: fuel; fuel tank.consequences of defect: in the event of a vehicle fire, serious personal injuryand property damage could result.note: the conditions which may promote the problem are: hot weather, use offuel with a high reid vapor pressure, and operating vehicle in frequentstop-start service. | |||||||||||||||
| EQUIPMENT - OTHER - LABELS | ||||||||||||||||
| 79V227000 | INTERNATIONAL HARVESTER | from 09/01/1977 to 11/01/1978 | V (Vehicle) | 18778 | 12/27/1979 | OVSC | INTERNATIONAL TRUCK & ENGINE CORPORATION | 10/16/1979 | 12/13/1979 | 571 | 120 | |||||
| Defect Summary | The involved vehicles do not have the required certification labels stating correct tire and rim information. these vehicles do not conform to federal motor vehicle safety standard no. 120, tire selection and rims for vehicles other than passenger cars. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Dealer will inspect and replace incorrect labels free of charge. | |||||||||||||||
| Notes | Vehicle description: trucks.system: equipment; tire reserve load labels.consequences of defect: lacking proper label information, incorrect tires andrims could be installed during vehicle servicing. this would create an unsafedriving condition that could lead to a vehicle accident. | |||||||||||||||
| PARKING BRAKE | ||||||||||||||||
| 78V228000 | INTERNATIONAL HARVESTER | from 04/01/1976 to 09/01/1978 | V (Vehicle) | 7000 | 11/21/1978 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 10/17/1978 | 10/12/1979 | |||||||
| Defect Summary | The parking brake lever mounting bracket may bend and break due to repeated applications of the parking brake. this will create a tearing force at the bolt mounting area of the bracket. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Bent or cracked mounting brackets will be replaced and a reinforcement strap will be added to limit the lift and pull force on the bracket. this will be done without charge to owner. | |||||||||||||||
| Notes | Vehicle description: heavy trucks and school buses.system: parking brakes; hand brake lever bracket.consequences of defect: the parking brake could fail. if a vehicle is parked onan incline, with inoperative parking brakes, it could roll free and causeinjury and damage to persons and property.note: until the vehicle can be inspected, it should be parked with the wheelsturned in towards the curb. the wheels should be blocked, and the vehicleparked in the lowest gear. vehicle should not be left unattended with theengine running and a normal parking brake hand lever adjustment should bemaintained. do not adjust to higher than normal force, as this increases thepossibility of failure. | |||||||||||||||
| SERVICE BRAKES, AIR - DRUM | ||||||||||||||||
| 79V211000 | INTERNATIONAL HARVESTER | from 03/01/1975 to 04/01/1979 | V (Vehicle) | 25000 | 11/30/1979 | ODI | INTERNATIONAL TRUCK & ENGINE CORPORATION | 09/18/1979 | 12/12/1979 | |||||||
| Defect Summary | As a result of severe shock and vibrations, the brake spiders on the involved vehicles may develop cracks near the camshaft mounting boss. the crack propagates across the spider until the camshaft boss is completely severed from the remainder of the spider. when the camshaft boss has completely severed, the s-cam, s-cam bracket, air chamber and slack adjuster can fall away from the brake spider resulting in a no brake condition on the wheel. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | The dealer will replace the front brake spiders on all affected vehicles used in snow plow dump and refuse hauling applications. this will be done at no charge. | |||||||||||||||
| Notes | Vehicle description: medium and heavy trucks equipped with eaton 16-1/2 by 5inch s-cam.system: service brakes: brake spiders.consequences of defect: partial loss of front braking capability and imbalancescan affect vehicle stability during sudden stops. this can contribute to avehicle accident. | |||||||||||||||
| SUSPENSION - REAR | ||||||||||||||||
| 77V235000 | INTERNATIONAL HARVESTER | V (Vehicle) | 7525 | 02/07/1978 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 12/28/1977 | 10/12/1979 | ||||||||
| Defect Summary | The involved vehicles may contain a poor quality or an insufficient weld of the brake group mounting flanges to the axle housing. this could lead to the flange breaking loose from the housing, allowing the brake group to turn with the brake drum on brake application. this will cut the brake lines to the brake group and may cause partial loss of braking capability. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Dealer will reweld the brake flanges correctly, without charge to owner. | |||||||||||||||
| Notes | Vehicle description: medium trucks.system: suspension; rear axle housing.consequences of defect: partial loss of braking capability could result in lossof vehicle control and an accident. | |||||||||||||||
| WHEELS - MULTI PIECE | ||||||||||||||||
| 77V180000 | INTERNATIONAL HARVESTER | V (Vehicle) | 21980 | 11/11/1977 | ODI | INTERNATIONAL TRUCK & ENGINE CORPORATION | 10/17/1977 | 10/12/1979 | ||||||||
| Defect Summary | The deficiency exists in the front axle forged aluminum hubs. the deficiency which is in the barrel section between the inner and outer bearing, may result in cracks which could lead to hub failure. when hub failure occurs, the separated hub is retained on the axle spindle by the wheel bearing and adjusting nut. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | The dealer will replace the forged aluminum hubs with steel hubs, at no charge. | |||||||||||||||
| Notes | Vehicle description: medium and heavy trucks.system: suspension; wheels, front axle hubs.consequences of defect: continued vehicle operation could allow the separatedhub with the wheel and tire to become disengaged from the vehicle. thiscondition could result in loss of vehicle control and an accident.note: advance failure warning will occur in the form of wheel bearing lubeleaks on the wheel rim or tire. in the event hub failure occurs during vehicleoperation, warnings to the operator will occur in the form of an audible sound,wheel vibration and the steering feel of a severely underinflated tire. | |||||||||||||||
| 79V051000 | INTERNATIONAL HARVESTER | from 07/01/1977 to 01/01/1978 | V (Vehicle) | 9700 | 03/26/1979 | MFR | INTERNATIONAL TRUCK & ENGINE CORPORATION | 02/21/1979 | 10/12/1979 | |||||||
| Defect Summary | A casting deficiency may allow wheels to develop cracks in the spokes between the hub cap mounting area and the rim clamp pocket. continued usage can lead to the disengaging of the rim and tire from the vehicle. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Wheels with casting defects will be replaced at no charge. | |||||||||||||||
| Notes | Vehicle description: heavy trucks, truck trailers, and school buses equippedwith 20 inch cast spoke wheels.system: wheels; wheel spokes.consequences of defect: rim and tire separation can result in loss of vehiclecontrol and, possibly, a vehicle accident without prior warning.note: until vehicle is inspected and corrected, visually inspect spokes forcracking prior to daily vehicle operation. if cracks are present, discontinuevehicle use until repairs are completed. | |||||||||||||||