International Harvester Loadstar Series 1978

Model Loadstar Series made in 1978 by International Harvester got 5 recalls. There were some recalls concerningengine and engine cooling, equipment and parking brake.

Loadstar series year 1978

Recalls

Model 1978

Recalls

Campaign	Manufacturer	Manufacturing date	Type	# of units affected	Date Owner notified Mfg	Recall Initiated by	Manufacturers of recalled vehicles/products	Report Recieved Date	Record Creation Date	Regulation Part Number	FMVSS Number
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL
79V212000	INTERNATIONAL HARVESTER	from 01/01/1973 to 09/01/1978	V (Vehicle)	2950	10/26/1979	MFR	INTERNATIONAL TRUCK & ENGINE CORPORATION	09/18/1979	12/12/1979
Defect Summary	The fuel separators on the involved vehicles may have thin walls due to a material thickness problem. the separators in these walls may crack and may allow fuel vapors or liquid fuel to leak into the engine under high pressure conditions.
Consequence Summary
Corrective Summary	The dealer will install improved separators and relocate both the separator and fuel canister without charge.
Notes	Vehicle description: buses equipped with fuel tank evaporative emissionsystems.system: fuel; fuel tank.consequences of defect: leaking fuel in the presence of a source of ignitioncould lead to a vehicle fire and injury to vehicle passengers.
EQUIPMENT - OTHER - LABELS
79V227000	INTERNATIONAL HARVESTER	from 09/01/1977 to 11/01/1978	V (Vehicle)	18778	12/27/1979	OVSC	INTERNATIONAL TRUCK & ENGINE CORPORATION	10/16/1979	12/13/1979	571	120
Defect Summary	The involved vehicles do not have the required certification labels stating correct tire and rim information. these vehicles do not conform to federal motor vehicle safety standard no. 120, tire selection and rims for vehicles other than passenger cars.
Consequence Summary
Corrective Summary	Dealer will inspect and replace incorrect labels free of charge.
Notes	Vehicle description: trucks.system: equipment; tire reserve load labels.consequences of defect: lacking proper label information, incorrect tires andrims could be installed during vehicle servicing. this would create an unsafedriving condition that could lead to a vehicle accident.
PARKING BRAKE
78V228000	INTERNATIONAL HARVESTER	from 04/01/1976 to 09/01/1978	V (Vehicle)	7000	11/21/1978	MFR	INTERNATIONAL TRUCK & ENGINE CORPORATION	10/17/1978	10/12/1979
Defect Summary	The parking brake lever mounting bracket may bend and break due to repeated applications of the parking brake. this will create a tearing force at the bolt mounting area of the bracket.
Consequence Summary
Corrective Summary	Bent or cracked mounting brackets will be replaced and a reinforcement strap will be added to limit the lift and pull force on the bracket. this will be done without charge to owner.
Notes	Vehicle description: heavy trucks and school buses.system: parking brakes; hand brake lever bracket.consequences of defect: the parking brake could fail. if a vehicle is parked onan incline, with inoperative parking brakes, it could roll free and causeinjury and damage to persons and property.note: until the vehicle can be inspected, it should be parked with the wheelsturned in towards the curb. the wheels should be blocked, and the vehicleparked in the lowest gear. vehicle should not be left unattended with theengine running and a normal parking brake hand lever adjustment should bemaintained. do not adjust to higher than normal force, as this increases thepossibility of failure.
SERVICE BRAKES, AIR - DRUM
79V211000	INTERNATIONAL HARVESTER	from 03/01/1975 to 04/01/1979	V (Vehicle)	25000	11/30/1979	ODI	INTERNATIONAL TRUCK & ENGINE CORPORATION	09/18/1979	12/12/1979
Defect Summary	As a result of severe shock and vibrations, the brake spiders on the involved vehicles may develop cracks near the camshaft mounting boss. the crack propagates across the spider until the camshaft boss is completely severed from the remainder of the spider. when the camshaft boss has completely severed, the s-cam, s-cam bracket, air chamber and slack adjuster can fall away from the brake spider resulting in a no brake condition on the wheel.
Consequence Summary
Corrective Summary	The dealer will replace the front brake spiders on all affected vehicles used in snow plow dump and refuse hauling applications. this will be done at no charge.
Notes	Vehicle description: medium and heavy trucks equipped with eaton 16-1/2 by 5inch s-cam.system: service brakes: brake spiders.consequences of defect: partial loss of front braking capability and imbalancescan affect vehicle stability during sudden stops. this can contribute to avehicle accident.
WHEELS - MULTI PIECE
79V051000	INTERNATIONAL HARVESTER	from 07/01/1977 to 01/01/1978	V (Vehicle)	9700	03/26/1979	MFR	INTERNATIONAL TRUCK & ENGINE CORPORATION	02/21/1979	10/12/1979
Defect Summary	A casting deficiency may allow wheels to develop cracks in the spokes between the hub cap mounting area and the rim clamp pocket. continued usage can lead to the disengaging of the rim and tire from the vehicle.
Consequence Summary
Corrective Summary	Wheels with casting defects will be replaced at no charge.
Notes	Vehicle description: heavy trucks, truck trailers, and school buses equippedwith 20 inch cast spoke wheels.system: wheels; wheel spokes.consequences of defect: rim and tire separation can result in loss of vehiclecontrol and, possibly, a vehicle accident without prior warning.note: until vehicle is inspected and corrected, visually inspect spokes forcracking prior to daily vehicle operation. if cracks are present, discontinuevehicle use until repairs are completed.